• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE THREAD

Status
Not open for further replies.

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
This is a pre-order sale thread only. Assembly and shipment wont occur for another 2 weeks. I already have 5 Pre-order so I thought I put up this thread for those interested too. I will use three of the following drivers below with modes programability according to your preference. I will push HIGH to its max potential for which ever it may be. Due to the nature of warm tint LED I will most likely only be using OP reflector since those tend to produce relatively pleasant beams.

Driver 1
Mode Options:
3.5-4.5V Max
A: Last mode memory
B: No mode memory

1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
2) High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon
3) High, Medium
4) High, 10hz Strobe
5) Medium, High, 2hz Blink
6) High, Medium, 2Hz Blink
7) Moonlight, Medium, High
8) High, Medium, Moonlight


  • Moonlight 3mA-5mA so its very dim
  • Medium = 35% power so it's good for normal use
  • High = 100% the current power you choose
  • Under 2.8V the output will automatically reduce to 35% and blink once a minute
  • 1x Li-ion or 3xNiHM only. 2*CR123 or 2*Li-ion = Poof= Dead Drive/LED
  • Without memory the light will turn on to the first mode in the sequence if you were at ON any mode for longer than 1 second.

Driver 2:
Mode Options:
3-6V Max
- Low-Medium-High with memory
- Low-High with memory
- Low-Medium-High-SOS-Strobe with memory
- Low-High-Strobe with memory
3-6V max = 1*18650 or 2*CR123A , 2*Li-ion = Poof= Dead Drive/LED

Driver 3:
3-6V Single Mode


Price: $37 Shipped World Wide

Paypal: [email protected]
 
Last edited:

CarpentryHero

Flashlight Enthusiast
Joined
Jul 4, 2010
Messages
3,094
Location
Edmonton
Id be up for 1 dropin with driver one A)last mode memory 7) moonlight med high




Edit: PAYPAL Sent $37 :thumbsup:
 

Harry999

Enlightened
Joined
Jun 19, 2009
Messages
584
Vinh,

Craig now has basic beam shots on the new Nichia 219 compared to a 3000k led. The Nichia is definitely much brighter and a beautiful neutral. I am looking forward to getting this led into a number of my lights as you already know.

Regards

Harry

Sent from my smart phone using Tapatalk
 

Thatspec

Enlightened
Joined
Oct 6, 2011
Messages
263
:paypal: Transaction ID: 36298936FE533014H

Hi Vinh (Wayne?),
I'd take one Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60
A)last mode memory, 7) moonlight med high, OP, High=as far as you can push it before the tint goes bad.

Thanks, Mark
CPF: Thatspec
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
I am always excited to test out new LEDs! The XML was a revolution to me!

Vinh,

Craig now has basic beam shots on the new Nichia 219 compared to a 3000k led. The Nichia is definitely much brighter and a beautiful neutral. I am looking forward to getting this led into a number of my lights as you already know.

Regards

Harry

Sent from my smart phone using Tapatalk
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
:paypal: Transaction ID: 36298936FE533014H

Hi Vinh (Wayne?),
I'd take one Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60
A)last mode memory, 7) moonlight med high, OP, High=as far as you can push it before the tint goes bad.

Thanks, Mark
CPF: Thatspec

Got it! Thanks!
 

Diablo_331

Enlightened
Joined
Jul 26, 2011
Messages
646
PayPal sent for the following.

Driver 1
Mode Options:
3.5-4.5V Max
A: Last mode memory
7) Moonlight, Medium, High

Thanks Wayne!:wave:
 

af112566

Newly Enlightened
Joined
Jan 23, 2012
Messages
106
payment sent for one nichia drop in. driver 2 3-6v. lo,med,hi w/memory.
thanks!
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
I ordered 16 Nichia LEDs. 11 has already been spoken for. Now I am really eager to see what this LED is all about!
 

Henk_Lu

Flashlight Enthusiast
Joined
Oct 31, 2007
Messages
2,008
Location
Golden Cage
I need a high CRI module for a titanium host, this one sounds to be the one!

Driver 1
A: Last mode memory
7) Moonlight, Medium, High

Paypal sent!
 
Status
Not open for further replies.
Top