• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired *SOLD: OVEREADY GITD Z2 w/ VID drop-in...*SOLD*

luxlunatic

Flashlight Enthusiast
Joined
Feb 1, 2006
Messages
1,240
Location
SoCal
Oveready 18650 bored, GlowInTheDark Z2 Cerakote host with some goodies!
-VanIsleDSM drop-in. 5.6 Amp, Copper, Carclo optic 1654 lumen version with R4's (18650's only).
-FETtie switch.
-Triad tail (w/ clip holes).
-Black, 5 Cren, Xeno bezel.
-UCL lens.
-4 Trits
I installed the FETtie switch into the Triad tail, was going for the Stormtrooper look, also included is the stock Z2 GITD tail that still retains the stock SF switch. With the 5.6 amps that the VID drop-in pulls, it is recomended to use the FETtie, actually, its necessary!
I also applied a bit of GITD paint inside the optic "post holes" of the heatsink to glow through the optic and for when the GITD runs out of steam, Trit vials are mounted next to the posts to ensure non-stop glow! One of the trits is slightly brighter than the other 3, I either mixed up some older with newer or its a freak!

How bout' some pics:
GITDZ23.jpg

GITDZ21.jpg

GITDZ24.jpg


Love this light, excellent Z2 design With the VID drop-in, this light is a screamer!!


Love this light, excellent Z2 design and with the VID drop-in, it is a screamer!! The Triad tail finishes it off nice and gives good balance in the hand due to the extra weight of the copper sink up front.

As a word of warning, some common sense and good judgement needs to exercised with this light. 5.6 amps is a hefty amount and needs some respect, and this light does kick out a respectable level of heat out the front. On high, at point blank, I think it could melt or ignite certain materials (I almost can't believe I am saying this about a hand-held flashlight!!!).
When installing the drop-in, I used some thermal paste to aid in heat transfer to the head and body so at this time, I do not wish to part out the light, I will at least give it a few days, after that I may consider...
Over $700 in parts, shipping from different vendors, and time.

$650 $600 $575 OK, FINAL $550 *SOLD*
*FINAL DROP BEFORE I WITHDRAW*


-Paypal only please.
-First "I'll take it" in this thread has priority.
-Paypal fees and shipping to CONUS are included in the price.
-Shipping sent Priority with Delivery Confirmation.
-Not interested in trades at this time.

-Thanks for looking!
-Michael.
___________________________________________________
___________________________________________________

GITDZ22.jpg
 
Last edited:

sadtimes

Enlightened
Joined
May 14, 2008
Messages
491
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

Are you interested in any trades and are you willing to part it out? (I would be interested in the "empty" Z2 with factory tailcap and switch) =-)
 

warmurf

Enlightened
Joined
Oct 14, 2010
Messages
351
Location
Queensland Australia
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

whatasexylight!!!!!!!!!!!!! That's a one off beauty!!!!

Light - divorce - light - divorce - light - divorce....hang on.... I'm just going to get a coin... I'll come back to you later!...........
 
Last edited:

luxlunatic

Flashlight Enthusiast
Joined
Feb 1, 2006
Messages
1,240
Location
SoCal
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

Are you interested in any trades and are you willing to part it out? (I would be interested in the "empty" Z2 with factory tailcap and switch) =-)

I still want to give it a few days before I decide to part it out, if I part it out!
Thanks.
 

jcalvert

Enlightened
Joined
Aug 16, 2010
Messages
472
Location
Michigan
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

Per my PM from yesterday, in the event of a part-out, I would like to express my interest in the Xeno crenulated bezel ring and the Triad tailcap, but without the Fetie switch so that it can be available for whomever purchases the light engine. Thank you for the consideration!

However, I wish you the best in selling this entire package as one unit!
 

jin wu

Newly Enlightened
Joined
Oct 29, 2009
Messages
5
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

I will be very interestedin the vanisledsm drop in and the FETtie switch if you decided to part out the flashlight. Thanks.
 
Last edited:

gsteve

Enlightened
Joined
Sep 2, 2011
Messages
256
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

hmmm this light is very tempting
 

gsteve

Enlightened
Joined
Sep 2, 2011
Messages
256
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in....*

what would this cost to build
 

gsteve

Enlightened
Joined
Sep 2, 2011
Messages
256
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in...PRICE DROP.*

Id go delete plus shipping
 
Last edited:

jjohnson34

Newly Enlightened
Joined
Nov 5, 2011
Messages
101
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in...PRICE DROP.*

can I get back up on the cren bezel and the triad in case it parts out. thanx. But this is a sweet torch guys. I'd be all over it if I didnt already have a C2 with a Kerberos quad and a "TroopStormer" L2T. (White Cerakoted L2T). Thats a StormTrooper wannabe Haha
 

gsteve

Enlightened
Joined
Sep 2, 2011
Messages
256
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in...PRICE DROP.*

i wish this ad would go away!! Soooo tempting!!
 

Paulinski

Newly Enlightened
Joined
Oct 28, 2009
Messages
138
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in...PRICE DROP.*

......
 
Last edited:

luxlunatic

Flashlight Enthusiast
Joined
Feb 1, 2006
Messages
1,240
Location
SoCal
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in...PRICE DROP.*

BUMP!
With a final drop before I withdraw!
 

gsteve

Enlightened
Joined
Sep 2, 2011
Messages
256
Re: *FS: OVEREADY GITD Z2 w/ VID drop-in...PRICE DROP.*

getting tempting
 
Top