Surefire A2L tailcap on an L4?

[880arm]

I picked up a spare A2L tailcap on the marketplace a while back and have been trying to think of a good way to put it to use. As best I can tell it is completely interchangeable with the caps on my L1 and L2X which has me wondering whether or not it would work on an L4 and provide two levels of output. Does anyone have any experience with this? Would it work?

Also, are there any other SF's (other than the ones mentioned above) that this switch would work with?

Thanks!

[Size15's]

The A2L and the LX2 use an updated version of the Z62 two-stage push button pressure switch TailCap. The most obvious difference is the styling.

The Z62 is used by the A2, L1 and L2.

This TailCap is not "E-series" and will not fit on the E1L/E2L/E2DL or the L4.

[880arm]

Thank you sir for your reply.

I don't own an L4 yet so I wasn't sure what type of tailcap it used.

[Size15's]

You're welcome

The L4 like the E1L and E2L uses the Z57 Clickie TailCap.

This thread on SureFire TailCaps may help...

[880arm]

Thanks again. That's a great thread with lots of information.

Until just now I never realized how mixed up the pieces and parts are in the Surefire L series. If you had one of each "L" you could use just about any type of head or tail switch in the Surefire lineup (except for maybe some of the newer ones).

[Tana]

The magic of LEGO...