Stephane_A
Newly Enlightened
- Joined
- Apr 27, 2012
- Messages
- 19
Hello,
I have a Dive-Rite LED700 which has been flooded in sea water that I would like to upgrade because of poor efficiency.
Miraculously it still works (I had to rebuild the electric power contacts) but the light is very dim.
The heatsink is 35mm wide and 15.73mm long.
When the Led PCB and optics are in, it is 30mm long.
The battery pack is composed of 8 elements which can be NiMh AA cells (9.6V) or 1.5V Alcaline AA (12V). I don't have enough space in the canister to fit more than two 18650 elements.
Can someone recommend me of a LED PCB, optics and driver that would work with 9V?
Thank you for your help.
I have a Dive-Rite LED700 which has been flooded in sea water that I would like to upgrade because of poor efficiency.
Miraculously it still works (I had to rebuild the electric power contacts) but the light is very dim.
The heatsink is 35mm wide and 15.73mm long.
When the Led PCB and optics are in, it is 30mm long.
The battery pack is composed of 8 elements which can be NiMh AA cells (9.6V) or 1.5V Alcaline AA (12V). I don't have enough space in the canister to fit more than two 18650 elements.
Can someone recommend me of a LED PCB, optics and driver that would work with 9V?
Thank you for your help.
Last edited: