PEAK
Page 4 of 31 FirstFirst 123456789101114 ... LastLast
Results 91 to 120 of 912

Thread: EagleTac Clicky Ti

  1. #91

    Default Re: Eagtac Titanium Clicky

    non-technical questions beach honda

    what'll be your intended use of it?
    - actual serious use
    - EDC
    - shelf queen
    - sell off
    - show off
    - conducting tests and measurements
    - or merely fiddling and playing with it lol

    and your preferred (intended) carry option?
    - loose in the pocket
    - clipped to chest pocket of a shirt or jacket
    - on bunch of keys, keychain
    - belt carry with provided holster
    - with lanyard packaged in a bag

    Overall impressive product or meh?

  2. #92
    Flashaholic* beach honda's Avatar
    Join Date
    Apr 2007
    Location
    Concrete Jungle Surrounds Me
    Posts
    901

    Default Re: Eagtac Titanium Clicky

    Intended use: EDC which will see some harsh conditions such as oil, grease, sand, mud, and some salt water. No shelf queens or toys in my arsenal .

    Preferred carry option: Mostly clipped inside pocket with a small stubby lanyard attached. May see some holster use depending on conditions.

    Overall impression of light: I tend to shy away from Chinese lights but for the price, this is one that has value and quality written all over it. YMMV
    Last edited by beach honda; 06-16-2012 at 09:30 AM.
    -Chr1s-
    Got Lights? USE EM!!

  3. #93

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by beach honda View Post
    Intended use: EDC which will see some harsh conditions such as oil, grease, sand, mud, and some salt water. No shelf queens or toys in my arsenal .
    For the intended use you could have well bought the aluminum D25C Clicky (or Mini) instead *g*
    Would wonder how such a tiny shiny polished baby holds up during serious real life EDC..

    My intended use will be for showing off purposes and wowing people (with LiIon) at nocturnal barbecue parties

  4. #94
    Flashaholic* beach honda's Avatar
    Join Date
    Apr 2007
    Location
    Concrete Jungle Surrounds Me
    Posts
    901

    Default Re: Eagtac Titanium Clicky

    I like aluminum, don't get me wrong. But the benefits of titanium under harsh use conditions is ideal. I don't care so much about the shiny factor, it will look stonewashed soon enough. You should have seen my old Ti pd-s and Ti clicky.
    -Chr1s-
    Got Lights? USE EM!!

  5. #95

    Default Re: Eagtac Titanium Clicky

    Beach Honda, If you have time I would love to see a photo of that beauty standing next to a D25A Ti twisty if you have one ;-)

  6. #96
    Flashaholic* beach honda's Avatar
    Join Date
    Apr 2007
    Location
    Concrete Jungle Surrounds Me
    Posts
    901

    Default Re: Eagtac Titanium Clicky

    E.S.- this is my first Eagtac light
    -Chr1s-
    Got Lights? USE EM!!

  7. #97
    Flashaholic* mr.snakeman's Avatar
    Join Date
    May 2008
    Location
    Stockholm, Sweden
    Posts
    551

    Default Re: Eagtac Titanium Clicky

    I´ve just ordered one of each (A and C) from Illumination Gear, and now.

  8. #98
    Flashaholic* HighlanderNorth's Avatar
    Join Date
    Sep 2011
    Location
    Mid Atlantic USA
    Posts
    1,356

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by biglights View Post
    Its HERE!!!!!!!


    ^ Yeah, well thats because you have a reliable mailman who delivers your stuff on time! My mail-guy will come at 10am one day, then not come til 5:30pm the next day! Its 1pm now, and he still aint here...... I probably wont see my 2 D25's(A and C) til tonight....... If he manages to get it here today at all.

  9. #99

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by mr.snakeman View Post
    I´ve just ordered one of each (A and C) from Illumination Gear, and now.
    which tint/LED did you choose?

    It's so awesome that we can choose tint!!

  10. #100
    Flashaholic* mr.snakeman's Avatar
    Join Date
    May 2008
    Location
    Stockholm, Sweden
    Posts
    551

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by shelm View Post
    which tint/LED did you choose?

    It's so awesome that we can choose tint!!
    U2, the T6 is just too yellow for me.

  11. #101

    Default Re: Eagtac Titanium Clicky

    It's here but getting ready to go to work will open it later.

  12. #102
    Flashaholic* HighlanderNorth's Avatar
    Join Date
    Sep 2011
    Location
    Mid Atlantic USA
    Posts
    1,356

    Default Re: Eagtac Titanium Clicky

    Its almost 2pm, and the mail guy STILL isnt here!

  13. #103

    Default Re: Eagtac Titanium Clicky

    Man that sucks, my mail arrives in the same time frame everyday. Give or take 15 or 20 minutes.

  14. #104

    Default Re: Eagtac Titanium Clicky

    Highlander, that is torture of the highest degree...I feel your pain man!

  15. #105

    Default Re: Eagtac Titanium Clicky

    The treads are pretty stiff, what is the best lube for this kind of light?

  16. #106

    Default Re: Eagtac Titanium Clicky

    Got mine in today!! Nice little light. Now I just have to wait to play with it tonight!!!

  17. #107
    Flashaholic* HighlanderNorth's Avatar
    Join Date
    Sep 2011
    Location
    Mid Atlantic USA
    Posts
    1,356

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by EspionageStudio.Com View Post
    Highlander, that is torture of the highest degree...I feel your pain man!
    The mail guy finally came at about 3:00pm, so I got my lights.

  18. #108
    Flashaholic* HighlanderNorth's Avatar
    Join Date
    Sep 2011
    Location
    Mid Atlantic USA
    Posts
    1,356

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by biglights View Post
    The treads are pretty stiff, what is the best lube for this kind of light?

    I agree about the threads not being so great. Mine wanted to strip on the tailcap end, and the washers fell out, and the switch isnt attached, and it was very tight, causing the threads to want to strip again. Then I noticed you can put the batteries in through the head instead of the tail cap, and it has longer threads, and doesnt have washers or switches falling out, so I think its better to install the batteries through the head.

    As far as lube, you have to use the right kind. I used a little bit of soy based, thick lithium grease. But not much, and I didnt get it on the battery or anywhere other than the threads. Thats important. I wiped off any excess lube. But to be honest, I am not sure that lithium grease is or isnt the best lube for this type of situation, but it has worked for me, and I use lithium grease for all kinds of stuff, with no problems.

  19. #109

    Default Re: Eagtac Titanium Clicky

    I would love to see a photo of the A and C models side by side if any of you lucky dogs (wont get mine until monday) have the time.

  20. #110

    Default Re: Eagtac Titanium Clicky

    got mine today,,LJ is aweome at shipping!!what can i say,,a very nice ti light at a great price.got the cool white and its nice and bright not too green and the finish is surprisingly good.this is my first ti light and im very happy with it.

  21. #111
    Flashaholic* GordoJones88's Avatar
    Join Date
    Nov 2011
    Location
    Tennessee
    Posts
    758

    Default Re: Eagtac Titanium Clicky

    Anybody try an AW IMR 16340 with the D25C XMLU2 Titanium Clicky yet?

    The aluminum D25C using an AW IMR 16340 has a 10 lumen Low mode and a 750 lumen Med, Hi, and Turbo mode.

    Does the Titanium model driver give a 200 lumen Medium and/or a 400 lumen Hi mode with Li-Ions?

  22. #112
    Flashaholic* HighlanderNorth's Avatar
    Join Date
    Sep 2011
    Location
    Mid Atlantic USA
    Posts
    1,356

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by GordoJones88 View Post
    Anybody try an AW IMR 16340 with the D25C XMLU2 Titanium Clicky yet?

    The aluminum D25C using an AW IMR 16340 has a 10 lumen Low mode and a 750 lumen Med, Hi, and Turbo mode.

    Does the Titanium model driver give a 200 lumen Medium and/or a 400 lumen Hi mode with Li-Ions?


    I have 2 Soshine 16340's that have never been used, and are fully charged. But I wanted to make sure that using a 16340 is OK before I do it. Is it for sure?

    Using the Cr123 these lights have many brightness settings. I have found 4 so far, but there is a moonlight mode somewhere too.

  23. #113
    Flashaholic* GordoJones88's Avatar
    Join Date
    Nov 2011
    Location
    Tennessee
    Posts
    758

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by HighlanderNorth View Post
    I have 2 Soshine 16340's that have never been used, and are fully charged. But I wanted to make sure that using a 16340 is OK before I do it. Is it for sure?

    Yes, let us know if you get distinct brightness levels different
    than the last column on this chart using a 16340 (RCR123).

    The aluminum D25C uses the A950RC circuit,
    and the titanium D25C uses the A950RC II circuit.


    Edit: Highlander reports his D25C Titanium using a 16340 is like column 2. Anybody else?


    Last edited by GordoJones88; 06-16-2012 at 10:31 PM.

  24. #114
    Flashaholic EPVQ30's Avatar
    Join Date
    Mar 2009
    Location
    Boston, MA
    Posts
    133

    Default Re: Eagtac Titanium Clicky

    my views on the light are in par with the other members' opinions. hopefully i will flip this light for what i paid including s+h.
    my 15 dollar 1 mode rominsen rcc3 r2 serves my the micro cr123 compact purpose. in reality, i have to edc something bigger.

  25. #115

    Default Re: Eagtac Titanium Clicky

    Quote Originally Posted by GordoJones88 View Post
    using a 16340 is like column 2
    in other words, with Liion we can produce
    0.2lm
    11lm
    770lm

    That's a total of 3 different brightness levels as opposed to "5" (moon, low, med, high, turbo). Note: Since in reality the MED's are slightly different, we get 6 different brightness levels with CR123A as opposed to "5" or "7" (Hi2 = Hi1).

    Well, 3 is better than 2. And 3 is for sure better than 1 (=direct drive on all modes). And none of the blinking modes is lost with LiIon's. Altogether not perfect for EDC (with LiIon) but not too shabby in my books either.

  26. #116
    Flashaholic* beach honda's Avatar
    Join Date
    Apr 2007
    Location
    Concrete Jungle Surrounds Me
    Posts
    901

    Default Re: Eagtac Titanium Clicky

    So does the general consensus of owners reflect a positive note? I think my light is fantastic. how did anyone unscrew the tail end of the light? I would never have tried to replace the battery any other way but unscrewing the head.

    Any other impressions?
    -Chr1s-
    Got Lights? USE EM!!

  27. #117

    Default Re: Eagtac Titanium Clicky

    Yeah I think it is a very nice light, I have the D25A. Other than the stiff threads, which I ordered some grease for, I haven't seen any problems. (thanks beach honda!!) For a single AA this is a very impressive light!!! I wasn't expecting the walls to be thick like my titanium jetbeam, they are not the same light. At a third the price one should not expect it to be.

  28. #118

    Default Re: Eagtac Titanium Clicky

    anyone wants to share a photo of the threads or the wall thickness (close-up, zoom)?

  29. #119

    Default Re: Eagtac Titanium Clicky

    This is a bad example from my phone of the d25A http://db.tt/AglUT8Iz

  30. #120
    Flashaholic* beach honda's Avatar
    Join Date
    Apr 2007
    Location
    Concrete Jungle Surrounds Me
    Posts
    901

    Default Re: Eagtac Titanium Clicky

    I am interested in performance and durability reports.
    Pictures are nice too!
    -Chr1s-
    Got Lights? USE EM!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •