Orbita
Results 1 to 13 of 13

Thread: wvaltakis Ti HDS clip & screws **SOLD**

Hybrid View

  1. #1
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,142

    Default wvaltakis Ti HDS clip & screws **SOLD**

    Recently purchased here, but I'm not a fan of clips on my HDS.


    $25 Shipped to US address, Int'l available.





    Last edited by F250XLT; 05-27-2012 at 07:13 AM.
    "I am not a Collector" - Tim

  2. #2
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    1,980

    Default

    There are some differences in clip-hole spacing among the different Novatac/EDC/HDS/Ra lights ... if you might be able to check and confirm fitment for a "Legacy" HDS Clicky (such as the 170T), I'd definitely be interested.
    IF 2 = 1 THEN 1 = 0

  3. #3
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,142

    Default Re: wvaltakis Ti HDS clip & screws

    Quote Originally Posted by archimedes View Post
    There are some differences in clip-hole spacing among the different Novatac/EDC/HDS/Ra lights ... if you might be able to check and confirm fitment for a "Legacy" HDS Clicky (such as the 170T), I'd definitely be interested.

    I have no way of knowing, I only own the original HDS lights.
    "I am not a Collector" - Tim

  4. #4
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    1,980

    Default

    What's the approximate angle between attachment points?

    In other words, if one of the screws is at "noon", where's the other?
    IF 2 = 1 THEN 1 = 0

  5. #5
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,142

    Default Re: wvaltakis Ti HDS clip & screws

    Quote Originally Posted by archimedes View Post
    What's the approximate angle between attachment points?

    In other words, if one of the screws is at "noon", where's the other?
    Looks like 3 o'clock to me...
    "I am not a Collector" - Tim

  6. #6
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    1,980

    Default

    Quote Originally Posted by archimedes View Post
    What's the approximate angle between attachment points?

    In other words, if one of the screws is at "noon", where's the other?
    Quote Originally Posted by F250XLT View Post
    Looks like 3 o'clock to me...
    Thanks, and good luck with sale ( I am looking for the type that is about 100 degrees, or at about "3:30" ) .... I think these earlier versions were approximately 90 degrees apart.
    IF 2 = 1 THEN 1 = 0

  7. #7

    Default Re: wvaltakis Ti HDS clip & screws

    It should fit most HDS lights up to but not including the most recent generation (which are not drilled for clips). Also it will NOT fit the Ti clicky. This looks like a short clip for the earlier HDS lights - before the "Clicky".

    Mark Petry
    Bainbridge Island, WA

  8. #8
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,142

    Default Re: wvaltakis Ti HDS clip & screws

    Quote Originally Posted by mpetry912 View Post
    It should fit most HDS lights up to but not including the most recent generation (which are not drilled for clips). Also it will NOT fit the Ti clicky. This looks like a short clip for the earlier HDS lights - before the "Clicky".

    Mark Petry
    Bainbridge Island, WA
    Thank you for that info, much appreciated.

    Price drop, let's get this one sold.
    "I am not a Collector" - Tim

  9. #9
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,142

    Default Re: wvaltakis Ti HDS clip & screws

    $35 shipped.
    "I am not a Collector" - Tim

  10. #10
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,142

    Default Re: wvaltakis Ti HDS clip & screws

    Final Drop to $25 shipped to US address.
    "I am not a Collector" - Tim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •