vinhnguyen54 D26/P60 XML-U2 Cool White COPPER PCB 1300 Lumen Drop-In SALE THREAD

[tobrien]

back in stock?

[vinhnguyen54]

No more Copper PCBs for a while. The supplier just told me so...I will update asap

[tobrien]

No more Copper PCBs for a while. The supplier just told me so...I will update asap

dang that sucks! any ETA? i was so looking forward to buying one

[vinhnguyen54]

dang that sucks! any ETA? i was so looking forward to buying one

Another supplier has it for $5 more. This would bring the overall cost up too high. The better priced supplier said 3 more weeks. So I guess let's just hang on tight together :-(

[aL01]

Is a 2-mode for this Drop-in planned?

[vinhnguyen54]

Is a 2-mode for this Drop-in planned?

I can do any mode you want but if you need it driven more then 4.5A then there will be less space for solder filled.

[vinhnguyen54]

I jumped some hoops to acquire 3 more U2 Copper. I should have them in about 1-1.5week. If you are interested please let me know.

[Glenn7]

I have sent $55 for one already in post #57 I hope you noticed? (Unique Transaction ID 3ET40413VL744290M)
Direct drive, shallow reflector for throw, solder filled.

Thanks

[aL01]

Is a 2-mode for this Drop-in planned?

I can do any mode you want but if you need it driven more then 4.5A then there will be less space for solder filled.

I got your PM, that would be:

$55 -> Copper PCB 1300 Lumen Drop-in
$12 -> 2 Modes
$67 Total

Is it $12 per extra mode?
So if I wanted a 3 Mode, would it be an extra $12 or $24?

$55 -> Copper PCB 1300 Lumen Drop-in
$24 -> 3 Modes
$79 Total??


Thanks!

[vinhnguyen54]

I got your PM, that would be:

$55 -> Copper PCB 1300 Lumen Drop-in
$12 -> 2 Modes
$67 Total

Is it $12 per extra mode?
So if I wanted a 3 Mode, would it be an extra $12 or $24?

$55 -> Copper PCB 1300 Lumen Drop-in
$24 -> 3 Modes
$79 Total??


Thanks!

No 12$ for any modes combination you want.

[vinhnguyen54]

I have sent $55 for one already in post #57 I hope you noticed? (Unique Transaction ID 3ET40413VL744290M)
Direct drive, shallow reflector for throw, solder filled.

Thanks

Yours is done. I am just waiting for reflector shipment. Should be here soon. Yours is very bright.

[aL01]

I got your PM, that would be:

$55 -> Copper PCB 1300 Lumen Drop-in
$12 -> 2 Modes
$67 Total

Is it $12 per extra mode?
So if I wanted a 3 Mode, would it be an extra $12 or $24?

$55 -> Copper PCB 1300 Lumen Drop-in
$24 -> 3 Modes
$79 Total??


Thanks!

No 12$ for any modes combination you want.

Excellent!

[tobrien]

edit: i'll wait for the next shipment. sorry about that.

[Glenn7]

Yours is done. I am just waiting for reflector shipment. Should be here soon. Yours is very bright.

Wooahay!! Can't wait She'll be going into an FM copper host with a FETtie switch and a beefy head run on IMR 26650's.

[blackz28]

Pay pal sent $62
1300 lumen drop in
McClicky to fit Solarforce host

[vinhnguyen54]

I just found some copper PCB for XML that are are about 3 times as thick as the kind previously used. With some modification these PCB will truly be DIRECT LED ON COPPER as the previous much thinner copper LED PCB we used! :-)

[Glenn7]

I just found some copper PCB for XML that are are about 3 times as thick as the kind previously used. With some modification these PCB will truly be DIRECT LED ON COPPER as the previous much thinner copper LED PCB we used! :-)

Too late for one in mine?

[MattSPL]

I just found some copper PCB for XML that are are about 3 times as thick as the kind previously used. With some modification these PCB will truly be DIRECT LED ON COPPER as the previous much thinner copper LED PCB we used! :-)

Sounds good. I'll be ordering one when i've saved the cash.
Does your McClicky switch go into the new Solarforce L2M tailcap?

Cheers
Matt

[vinhnguyen54]

Too late for one in mine?

These new Copper PCB wont be arrive for another month....

[vinhnguyen54]

Sounds good. I'll be ordering one when i've saved the cash.
Does your McClicky switch go into the new Solarforce L2M tailcap?

Cheers
Matt

Yes I think so.

[MattSPL]

Ok thanks

[tobrien]

I just found some copper PCB for XML that are are about 3 times as thick as the kind previously used. With some modification these PCB will truly be DIRECT LED ON COPPER as the previous much thinner copper LED PCB we used! :-)

omg i'm so glad i waited for the next batch now

so could we expect longer runtimes/bursts when you turn it on so it'll stay cool(er) longer and you might not need to turn it off as quickly due to heat? this'll be great!

[vinhnguyen54]

No. It will still be super hot. It should be hotter faster than before since u got more copper for direct and immediate heat withdrawel. This might result is a higher peak lumen though. Larger light will benefit greatly from this large copper pcb as I will not have to remove any precious copper.

[tobrien]

No. It will still be super hot. It should be hotter faster than before since u got more copper for direct and immediate heat withdrawel. This might result is a higher peak lumen though. Larger light will benefit greatly from this large copper pcb as I will not have to remove any precious copper.

okay, well regardless I'm looking forward to one!

[mr.lumen]

i am interested in one. bright white, 1 mode. 2 questions. 1 in the first post you show a thicker heat-sink and shallower reflector and vice versa. what do the beams look like when compared? is there a noticeable loss in throw with the shallower one? i know the heat dissipation will be better. do you still sell both? 2. when is the soonest you could have one made up? im in a time sensitive situation which is why i ask. 3. would these drop ins work well in an oveready cryos cooling bezel sized z32/m2 head? its supposed to have great heat dissipation. thanks

[mr.lumen]

i added a third question after i had started typing and forgot to change it to 3 questions haha.

[MoreToasties]

I'd like one, along with a McClicky for a Solarforce tailcap, but I'm not quite clear on whether or not any are immediately available...I've sent you a PM.

[vinhnguyen54]

i am interested in one. bright white, 1 mode. 2 questions. 1 in the first post you show a thicker heat-sink and shallower reflector and vice versa. what do the beams look like when compared? is there a noticeable loss in throw with the shallower one? i know the heat dissipation will be better. do you still sell both? 2. when is the soonest you could have one made up? im in a time sensitive situation which is why i ask. 3. would these drop ins work well in an oveready cryos cooling bezel sized z32/m2 head? its supposed to have great heat dissipation. thanks

Beautiful & Wide beam in IMO.

I can't give an exact estimate but soonest would be in a week.

I do not have a Cryos bezel so I can't comment

[vinhnguyen54]

I'd like one, along with a McClicky for a Solarforce tailcap, but I'm not quite clear on whether or not any are immediately available...I've sent you a PM.

Soonest would be in a week. But I cant be 100% sure and shipping if from out of the USA. Probaly China, Taiwan or Hong Kong

[Glenn7]

These new Copper PCB wont be arrive for another month....

oh ok no worries, I like the thin ones anyway.....