Who doesn't love runtime tests?!?! :rock:
There has been considerable discussion about the lowest level runtimes of the new HDS Clickies. So, for your enjoyment, I'm doing runtime tests on my two Clickies: both are new firmware ACME style lights. One is a 140, with Osram GDP, one is a 200 with XP-G. They are stock from Henry, no mods.
I have programmed them both to the minimum level, .07 lm. and then loaded them with unused SF primaries, EXP 02/2013. The test began at exactly 12:00 AM, 6/19/2012.
I'll let you know how it goes. Feel free to talk amongst yourselves in the meantime.
The result for the two lights noted above was somewhere between 138-144 hours.
Edit:
I am adding a third test now that there are new emitters and firmware being used. I am doing a runtime test on a new Clicky N170 with Nichia 219b on its new lower low, .02 lm with a fresh Battery Station CR123.
There has been considerable discussion about the lowest level runtimes of the new HDS Clickies. So, for your enjoyment, I'm doing runtime tests on my two Clickies: both are new firmware ACME style lights. One is a 140, with Osram GDP, one is a 200 with XP-G. They are stock from Henry, no mods.
I have programmed them both to the minimum level, .07 lm. and then loaded them with unused SF primaries, EXP 02/2013. The test began at exactly 12:00 AM, 6/19/2012.
I'll let you know how it goes. Feel free to talk amongst yourselves in the meantime.
The result for the two lights noted above was somewhere between 138-144 hours.
Edit:
I am adding a third test now that there are new emitters and firmware being used. I am doing a runtime test on a new Clicky N170 with Nichia 219b on its new lower low, .02 lm with a fresh Battery Station CR123.
Last edited: