Copper SinkPad Core
Now standard equpment!
New Higher output,
950+ OTF lumens!
Shorty XML maglites are now available with XM-L2 crees next generation LED.
In addition to the much higher output produced by the new XM-L2, shorty maglites are now also come with a 3.5A max output! Together this provides a huge jump in output verses previous models!
1 sec- 705.5
30 sec- 657
1 min- 652.1
2 min- 646.1
3 min- 641.2
4 min- 636.4
5 min- 631.5
NEW XM-L2 3.5A
30 sec- 875.2
1 min- 875.2
2 min- 863
3 min- 861.8
4 min- 850.9
5 min- 849.7
XM-L2 With copper MCPCB
Turn on- 970
30 sec- 965
1 min- 958
2 min- 942
3 min- 928
4 min- 917
5 min- 907
EDIT: 12/4/13 Copper sinkpad mounting now standard.
EDIT: 3/28/13 A.S. UI group 2 now starts at low.
EDIT: 1/28/13 XM-L2 NOW AVAILABLE!!! <-----
EDIT: 11/8/12 New Signature User Interface added.
EDIT: 8/17/12 Head finning added.
I am now pleased to offer cut down/re-threaded C and D Maglites for sale.
The C lights have also been bored to fit 26650.
The D cell lights come equipped with a sleeve that is bored out to comfortably fit any 26650 cells, or the sleeve can be removed for use with D size li-ion
The spring of the D cell lights is recessed into the tail. An adapter has been added to ensure tight fit of the smaller spring so there is no chance you will be "chasing your tail" down the street.
I am offering any these as a host only or as a completed light with a top bin Cree XM-L2 emitter and a multi mode driver.
Here are a couple comparison shots.
Standard LED Mag.
Shorty XML Mag.
Custom shorty maglites will now include 3.5A driver with my new signature UI.
The UI consists of 4 groups.
1. Ramp mode low to high with memory.
2. Low 2%, Med 25%, High 100% with memory.
3. Low 2% Med 25%, High 100%, Srobe, SOS, Beacon, NO memory.
4. High 100%, Low 15%.
The light will come preset to your choice of group if needed.
Mode groups are switched by 8 fast clicks <.25 sec.
The driver has a low voltage flash at 3V to protect li-ion cells.
Upon entering the beacon mode there is a battery indicator flash. The light will quickly flash 1 time for each 0.1V above 3V and then enter the beacon mode.
Here is a video of the UI in action.
Prices are as follows.
Shorty host only with factory switch C or D choice of any common color 59$
Fully assembled Light with XM-L2, heat sink, driver UCL lens $139
Head finning $20
Shipping world wide is now FREE!!
No batteries are included with this sale.
Paypal is email@example.com
If you have questions feel free to ask
I am not affiliated with Mag instrument inc. which owns the MAG family of trade marks including Mag-Lite and Mini-Maglite. My custom shorty flashlights are not made, endorsed, recommended, licensed or approved by Mag instruments inc.