Battery Junction
Results 1 to 3 of 3

Thread: How to replace bulb on Surefire 10X Denominator

  1. #1
    Unenlightened
    Join Date
    Mar 2012
    Posts
    2

    Default How to replace bulb on Surefire 10X Denominator

    I tried searching but nothing was found. Does anyone know how to replace the high beam light bulb on Surefire 10x Denominator? Surefire doesnt seems to have it on their website.

    Thanks.

    [IMG][/IMG]
    [IMG][/IMG]

  2. #2
    Flashaholic Bogie's Avatar
    Join Date
    Nov 2004
    Location
    Queens,NY
    Posts
    326

    Default Re: How to replace bulb on Surefire 10X Denominator

    10X model

    Remove the flashlight head by rotating it counterclockwise.
    Use a 5/32" hex wrench (included with 10X), to remove the screw in the center of the spring at the base of the head.
    Carefully separate the reflector from the head.
    Replace the inoperative lamp with a new one.
    Replace the reflector in the head and replace the Allen screw.
    Attach the head to the flashlight body.

    NOTE – For all models, avoid touching glass bulb. Oil from your hand will degrade the surface and affect the performance of your flashlight.
    SF 6P/G2/E2e/E2d/E2DL/E1e/L2/A2-PP(R)/A2(G)/L1(R)/L1(G)/M95/KL4(x2)/KL4(Blk)
    Gladius,Inova X5(R),Microlight(G)
    Costco/HF HID

  3. #3
    Unenlightened
    Join Date
    Mar 2012
    Posts
    2

    Default Re: How to replace bulb on Surefire 10X Denominator

    That was right on. Thanks.. new bulb is on order, thanks again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •