Innovative and high-quality Rofis flashlight
Results 1 to 6 of 6

Thread: Surface finishes?

  1. #1
    *Flashaholic* fyrstormer's Avatar
    Join Date
    Jul 2009
    Location
    Northern VA, USA
    Posts
    5,719

    Default Surface finishes?

    I was looking at the Alpha Bespoke options on the Dark Sucks website, and there were a number of surface finishes listed. It's not directly stated there, but I think most of the surface finishes are actually sub-surface finishes, which are then nickel-plated. However, I'm still unclear as to what they all look like.

    Here are the options I saw:
    Blasted + Polished
    Stone-Washed
    Full-Brushed
    Cerakote
    Solid Copper
    Alpha ICE

    Cerakote and Solid Copper are obvious, but what do the others look like? Can anyone point me to a clearly-labeled gallery of pictures showing what each option looks like?

  2. #2
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    2,349

    Default Re: Surface finishes?

    You must be right, from memory the raised parts were polished and the grooved parts were blasted (on your first one) - but underneath would be my thought aas well.


  3. #3

    Default Re: Surface finishes?

    You should be able to see all of the finishes here Just select one of the three grey bars and it will open up an show you thumbnails where you can navigate to larger images.

  4. #4
    *Flashaholic* fyrstormer's Avatar
    Join Date
    Jul 2009
    Location
    Northern VA, USA
    Posts
    5,719

    Default Re: Surface finishes?

    Very nice, thank you. You might want to add a link to that page from the Custom Order Form, because it never occurred to me to look at the order page for the non-custom lights to find information about the options available on custom lights.

    Also, is there any chance of getting more blue switch covers? I'd fill out the custom-order form right now if that option were still available for me to select.
    Last edited by fyrstormer; 07-19-2012 at 02:43 AM.

  5. #5

    Default

    Quote Originally Posted by fyrstormer View Post

    Also, is there any chance of getting more blue switch covers? I'd fill out the custom-order form right now if that option were still available for me to select.
    Blue boots should now be available as an option

  6. #6
    *Flashaholic* fyrstormer's Avatar
    Join Date
    Jul 2009
    Location
    Northern VA, USA
    Posts
    5,719

    Default Re: Surface finishes?

    Quote Originally Posted by archer6817j View Post
    Blue boots should now be available as an option
    Yay!

    EDIT: ...and my request is sent.
    Last edited by fyrstormer; 07-29-2012 at 01:26 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •