Batch #1 - Custom anodized Sunwayman V series Ti Selector rings

[nfetterly]

Can people who have ordered please let me know which model they will be using them on...?

(at this point I'm hoping everyone yells "Ti+" )

Not Ti

At this point. If / when I can find a Ti in neutral flavor than I will have a Ti. At this point I have a V10A and V20A.

[firefighterb]

COOL!!....I will take #8 if it's still available, thanks!

[okwchin]

How does the pattern flow around with #10

Could you describe the colours as you go around?

Very interested in the more clean look but with strong colours, (like #11 more, especially if in a strong colour (gold purple?)), but #10 can do if the colours flow smoothly to go along with the larger V10R Ti.

Ones I like, in order. #11 #1 #9

Im thinking - Ill take #3 and #10

But in the end I had custom ones made, so #3 and #10 are back up for grabs

[ukmidnite]

the sequence on #10 is bronze, purple, dark blue, light blue, silvery blue, pale yellow, deep yellow, magenta, violet

If you want I can do one with alternating yellow and green slots to go with your trits


any variations on the ones in the first post - just ask I can do one to suit your light - (although red and black are not possible)

[Benchiew]

Ukmidnite. Those work of art are really nice. Looking at them makes me want to go get a SWM so that I can buy one from you.

I will surely be looking out for more of your work.

[mr.snakeman]

"11 received and mounted on one of my tritted V10R Ti´s. Switching the magnets was a bitch, but finally got it right in the end.

[ukmidnite]

Glad it got there ok!
It is a bit time consuming but you get there in the end! I don't think the magnets need to be pushed all the way into the slots and the head doesnt have to be complete to test (just don't look at the emitter when testing ! Use a ceiling bounce).

Once you've fitted it you can give it a wipe with windex to remove any grease from the coloured parts



I am doing a couple of rings for Okwchin by request so #3 and #10 are still available

[senna94]

Got mine today and magnets were no problem at all. A good strong pair of tweezers is a must to remove magnets. Install them with the notched part down and then test the light. If it functions erratically pull one of the magnets out and rotate it 180 degree with the notch still facing down into the slot. Place a small dot with a Sharpie or other marker on the magnet you just turned. Re test the light and if it is still erratic then simply remove and rotate the magnet opposite the dot and that should be it. This covers all possible sequences quickly. Looks great and I love this new ring. Thanks!!

[ukmidnite]

Thanks! Glad you like them!

Still some left!
Working on batch 2 now too

[gunga]

Any non=anodized ones? I'm just looking for improved grip.

[ukmidnite]

Any non=anodized ones? I'm just looking for improved grip.

Yeah no problem!
Note that the slots have been modified by hand and not machined. Drop me a pm if you're interested

[nfetterly]

I have my V10R Ti on the way as well as an insanity drilled cooling ring.

[nfetterly]

[QUOTE=nfetterly;3997609]

#1 and BUYING #2



BUYING #9


[/QUOT]

I will take #2 & #9.

I presume there are no issues putting these on non-Ti V-series lights - other than the travesty of it.....

I have to send you some of my lights to work on......

Please pm me pp info

Parts arrived! I've also now got a V10 Ti+ on the way as well as a "insanity" drilled for trits Ti cooling fin ring on the way. So these were expensive considering I needed everything else to go with it!

[roadkingedout]

would it be possible to do the clip to match?

[ukmidnite]

Yeah I think so... I'll try with my clip...