Sold/Expired New Cree XP-G2 P60 Replacement Modules

New Cree XP-G2 P60 Replacement Modules

This thread is for XP-G2 P60 modules. I decided to start a new thread for these new emitters from Cree since my regular P60 thread is a bit crowded. At this time I will only have Coolwhite.

I will be using a new XP-G reflector from a new manufacturer I have been using. These Lop and smooth are made for XP-G's type emitters. These are not the small hole design I have been using in my regular P60 thread. i have been using the new lop for all the nichia's I have been building and members have loved them. The lop finish is perfect in quality and makes a totally smooth ring free beam. The emitter hole is built for XP-G type emitters and they just work great.

For those that have not read up on these, they are brighter than the XP-G and should have much better throw. The XP-G has a 125 degree beam angle and the new XP-G2 will have a 115 degree beam angle much like the XP-E but much brighter. There are rumors of 400 lumens at 1.4 amps but we will have to see if this is true but several have quoted this. Since these run at 1.4 amps give or take that means we will have a good throwing emitter with pretty darn good runtimes.

I will get some pictures of the new emitter in the new reflector tomorrow as I get a few built. I will also post OTF lumens as soon as I get some built.

I hope in the near future to get some neutrals but at this time they are coolwhite only. I have found some neutrals and warms but the vendor will not bread any 1000 pc reels since they are so new and that is a few too many.

Prices will be the same as a regular XP-G so that means $35 a module shipping in the US is included.

Potting is included in the price

For International shipping the rates are as follows. Int 1st class is a added $12and Int priority mail is $23.95

ALL EMITTERS NOW MOUNTED ON DIRECT BOND COPPER SINKPADS.

Available voltages and levels and tints are below.


XP-G2 S2 flux 2B tint 6000k
XP-G2 R5 flux 3D tint 5000k
XP-G2 R4 flux 5B4 tint 4000k
XP-G2 R2 flux 7B4 tint 3100k warm white
XP-G2 Q2 7C1 tint 3000k warm white 90CRI

2.8-6 volts 1.4 amps
1 level
3 levels * low, med, high *
3 levels * med, high , strobe* 1.5 amps only
5 levels *low, med, high, strobe, SOS*

with these 6 volt drivers I can add resistors to raise the amperage to 1.7 amps if wanted, that said remember the more amperage the more heat and the less runtime.

_____________________________________________________________________________
Low Voltage OUT OF STOCK

XP-G2 R5 flux 1D tint 6500k
XP-G2 R5 flux 3D tint 5000k
XP-G2 R4 flux 5B4 tint 4000k
XP-G2 R2 flux 7B4 tint 3100k warm white
XP-G2 Q2 7C1 tint 3000k warm white 90CRI

Low voltage drivers .8-3volts
3 level (Hi 1.2 amp/ M - 50% / Lo 10%)

______________________________________________________________________
Multiple cells

XP-G2 S2 flux 2B tint
XP-G2 R5 flux 3D tint 5000k
XP-G2 R4 flux 5B4 tint 4000k
XP-G2 R2 flux 7B4 tint 3100k warm white
XP-G2 Q2 7C1 tint 3000k warm white 90CRI

3.6-18 volts 1.75 amps
1 level
__________________________________________________________________________________________

XP-G2 S2 flux 2B tint
XP-G2 R5 flux 3D tint 5000k
XP-G2 R4 flux 5B4 tint 4000k
XP-G2 R2 flux 7B4 tint 3100k warm white
XP-G2 Q2 7C1 tint 3000k warm white 90CRI

3.6-10 volts 1.4 amps
3 level *high, med, low*
_____________________________________________________________________________________

XP-E2 Emitters available in same options and levels available to XP-G2 above.
Price is $35

XP-E2 Coolwhite R3 flux 1C-1D tint
XP-E2 Neutral 4000k R2 flux 5B4 tint
XP-E2 Photo Red or red
XP-E2 Green
XTE Royal Blue
Rebel Cyan
_________________________________________________________________________________



Please include whether you want OP or Smooth reflectors.

Paypal is preferred payment method but money orders can be arranged. Paypal address is in my Bio. Please include CPF nickname, what ordered including voltage, levels, reflector type and if you want module potted in the paypal notes.

Please post what needed in thread including levels, reflector type and voltage.

Any questions please post in thread or PM me and I will get back to you.

Thanks


Here are a couple of pictures of the reflectors being used. They are the reflectors designed for XPG's

Re: XP-G2 / P60 STYLE MODULES

awwwwwww here it goes, open the flood gates haha

i can't wait for you to stock some NW chips eventually

Re: XP-G2 / P60 STYLE MODULES

I will take this
XP-G2 R5 flux
3.6-10 volts 1.4 amps
3 level *high, med, low*

With smooth reflector please. Paypal will follow shortly. Thanks!

Re: XP-G2 / P60 STYLE MODULES

addictedmatt said:

I will take this
XP-G2 R5 flux
3.6-10 volts 1.4 amps
3 level *high, med, low*

With smooth reflector please. Paypal will follow shortly. Thanks!

Click to expand...

Hi

I will ship on Tuesday morning

Thanks

Dave

Re: XP-G2 / P60 STYLE MODULES

Pm sent for 4 Units @ $35 each, Plus Int 1st class International shipping $5.00

XP-G2 R5 flux
2.8-6 volts 1.4 amps
5 levels *high , med , low , SOS, Strobe*
With smooth reflector

Re: XP-G2 / XP-E2 / P60 STYLE MODULES

TORCH_BOY said:

Pm sent for 4 Units @ $35 each, Plus Int 1st class International shipping $5.00

XP-G2 R5 flux
2.8-6 volts 1.4 amps
5 levels *high , med , low , SOS, Strobe*
With smooth reflector


Paypal will follow shortly if ok.

Click to expand...

Hi

That is fine. I can just get 4 units in under the $5 shipping.

Thanks

Dave

Re: XP-G2 / P60 STYLE MODULES

XP-G2 R5 flux
2.8-6 volts 1.4 amps
3 levels * high , med , low *
Orange peel ref

paypal incoming

thanks!

Edit: just a quick question. What's the current on med and low? Thanks!

Re: XP-G2 / P60 STYLE MODULES

jmpaul320 said:

XP-G2 R5 flux
2.8-6 volts 1.4 amps
3 levels * high , med , low *
Orange peel ref

paypal incoming

thanks!

Edit: just a quick question. What's the current on med and low? Thanks!

Click to expand...

Hi

High is 100% / med is 30% / low is 5%

that puts med at about 400ma and low is about 70ma

Dave

Re: XP-G2 / P60 STYLE MODULES

nailbender said:

Hi

High is 100% / med is 30% / low is 5%

that puts med at about 400ma and low is about 70ma

Dave

Click to expand...

so in theory low would last over 48 hours with a 3400mah panasonic cell and medium would last 8.5 hrs

good form :rock:

Re: XP-G2 / P60 STYLE MODULES

to Dave or anyone that knows.

For my dive light with it's small reflector I bought your XM-L (U2 bin) drop-in to get the greatest amount of throw. Apparently your module is driven at 100% so 3 amps. Is this the best bang for my buck or are there any advantages regarding the beam with this new LED? I realize there would be a significant lumen output drop with the XP-G2 vs. your XM-L.

You mentioned Viewing angle. The XP-G2 is 115° and the XM-L is at 125°.
I wonder if the XP-G2 could throw better than your U2 XM-L that I purchased?

Re: XP-G2 / P60 STYLE MODULES

jmpaul320 said:

so in theory low would last over 48 hours with a 3400mah panasonic cell and medium would last 8.5 hrs

good form :rock:

Click to expand...

Hi

That is correct, switch resistance and a few other things will change runtimes slightly but your figures will be quite close.

Dave

Re: XP-G2 / P60 STYLE MODULES



XP-G2 R5 flux 1D tint
2.8-6 volts 1.4 amps
3 levels high , med , low
smooth reflector
free potting

Re: XP-G2 / P60 STYLE MODULES

MRTdiver said:

to Dave or anyone that knows.

For my dive light with it's small reflector I bought your XM-L (U2 bin) drop-in to get the greatest amount of throw. Apparently your module is driven at 100% so 3 amps. Is this the best bang for my buck or are there any advantages regarding the beam with this new LED? I realize there would be a significant lumen output drop with the XP-G2 vs. your XM-L.

You mentioned Viewing angle. The XP-G2 is 115° and the XM-L is at 125°.
I wonder if the XP-G2 could throw better than your U2 XM-L that I purchased?

Click to expand...

Hi

While it is a tighter beam angle and while some disagree with my thinking I still believe that raw power has alot to do with throw. If we could push the XP-G2 at 750-800 lumens like a XML then I would say yes but at half the lumens and what you are using it for I have trouble seeing it giving you more distance.

Now if you had found you did not need as much light that you now have then having twice the runtime might be advantageous.

Just my thoughts.

Dave

Re: XP-G2 / P60 STYLE MODULES

I just wanted to post that I have received my shipment of emitters and I am working on the orders and on trying to get you all some good information.

Got to get some dinner right now more a bit later.

Dave

Re: XP-G2 / P60 STYLE MODULES

i forgot to add the free potting on my order dave - if its not too late could you add this? thanks

Re: XP-G2 / P60 STYLE MODULES

PP Sent: 40L76336LF646302A (+2YR72540SW963294D Forgot to included shipping on original)

XP-G2 R5 flux 1D tint
3.6-10 volts 1.4 amps
3 level *high, med, low*
OP reflector
Potted

Re: XP-G2 / P60 STYLE MODULES

TheCleanerSD said:

PP Sent: 40L76336LF646302A (+2YR72540SW963294D Forgot to included shipping on original)

XP-G2 R5 flux 1D tint
3.6-10 volts 1.4 amps
3 level *high, med, low*
OP reflector
Potted

Click to expand...

Hi Chris

No charge for shipping in the US I have returned your $5.

thanks for the business.

Dave

Re: XP-G2 / P60 STYLE MODULES

jmpaul320 said:

i forgot to add the free potting on my order dave - if its not too late could you add this? thanks

Click to expand...

Hi

NO problem, since I am including free potting you get it even if you don't order it.

Thanks

Dave

Re: XP-G2 / P60 STYLE MODULES

nailbender said:

Hi

NO problem, since I am including free potting you get it even if you don't order it.

Thanks

Dave

Click to expand...

you the man :rock:

Re: XP-G2 / P60 STYLE MODULES

By any chance would it be possible lower the amperage?:shrug:

Looking for a drop-in around the 200-250 lumen mark