PK Design Lab
Page 1 of 2 12 LastLast
Results 1 to 30 of 50

Thread: vinhnguyen54 New Assembled drop in for sale 8.18.2012 Price Drop

  1. #1

    Default vinhnguyen54 New Assembled drop in for sale 8.18.2012 Price Drop

    1. SOLD XPG-R4 4500K excellent tint! 1.4A Low-Medium-High with last mode memory, light OP reflector with perfect filled tight hot spot and beam, flawless beam IMO, 2.8-6V, solder filled pill for extra heat sinking. Tint is similar to Nichia 219 but with greater throw and efficiency. $40
    2. Same as number 2 but has a heavier OP reflector for a more floody beam. $35
    3. Same as Number 2. $40
    4. SOLD XML-T4 Warm 3500K tint, excellent beam on this one! Throwey focus filled hot spot, 2.5-4.5V, Light OP reflector, 3.04A High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon with no mode memory so it always starts on high. Bright incandescent tint! Solder filled. $43
    5. Same as number 4 but has a 3A High-Medium-Low driver with last mode memory. Voltage is tight at 3-4.2V but it has excellent current regulated efficiency. Due to the large driver drop in is about 2mm taller than typical P60. Fits perfect in a solarforce host though. Excellent beam. $43 $39
    6. SOLDSame as number four but has a 2.8A Low-Medium-High with last mode memory. Excellent beam just as above 2 drop in. 3-6V. $43
    7. SOLD XP-G2 Cool White with Thrunite 1.85A High-Medium-LowLow with last mod memory driver. Light OP reflector. An excellent P60 size thrower with a flawless beam. 2.7-4.2 Price is high but I think it’s worth it. $45
    8. Single mode UV drop in 3-4.2V $25
    9. SOLD XPG-R4 4500K Moonlight-Medium-High with last mode memory. 1.52A, 2.5-4.5V. Heavy OP reflector for smooth pleasant beam. $37
    10. SOLD Single mode UV drop in 3-4.2V $25
    11. XPE-R4 Light OP Nice Focused thrower. 1.4A Low-Medium-High with last mode memory 2.8-6V. $35 $30
    12. XPG HCRI 90 3000K Warm tint. 1.4A Low-Medium-High with last mode memory 2.8-6V. Light OP throwey beam$37 $33
    13. SOLD XPE RED 1.4A Low-Medium-High with last mode memory 2.8-6V. $35
    14. XPG-R5 1.75A Low-Medium-High with last mode memory 2.8-6V. $25 $20
    15. XPE RED 1.75 A Low-Medium-High with last mode memory 2.8-6V. $38 $33
    16. XPE-R4 OP Nice Focused thrower. 1.52A High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon with no mode memory so it always starts on high.2.5-4.5V $35 $30
    17. SOLD XML-T4 Neutral 4000K 3.02A Moonlight-Medium-High with last mode memory 2.5-4.5V OP reflector. One of my favorite in terms on tint and beam. $40
    18. XML-T6 3.02A Moonlight-Medium-High with last mode memory 2.5-4.5V OP reflector. $25
    19. XRE-R2 EZ1000 1.52A High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon with no mode memory so it always starts on high. Still the best P60 Thrower LED 2.5-4.5V $35 $30
    20. XPG HCRI 90 3000K Warm tint. 1.4A Moonlight-Medium-High with last mode memory 2.5-4.5. OP floody beam $37 $33
    21. SOLDXML-T6 3.02A Moonlight-Medium-High with last mode memory 2.5-4.5V OP reflector. $25
    22. XPG HCRI 90 3000K Warm tint. 1.4A Moonlight-Medium-High with last mode memory 2.5-4.5. OP floody beam $37 $33
    23. XPE-R4 3-12V Low-Medium-Highwith last mode memory. Requires 2 Li-ion for max 1.5A. Light OP throws very good. $35 $30
    24. SOLDXML-U2 Smooth 3.02A High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon with no mode memory so it always starts on high. Bright and throwey $40
    25. SOLD XML-T6 3.02A Moonlight-Medium-High with last mode memory 2.5-4.5V OP reflector. $25
    26. XPG-R4 4500K Moonlight-Medium-High with last mode memory. 1.52A, 2.5-4.5V. Heavy OP reflector for smooth pleasant beam. $35 $30
    27. Fivemega Cooly XML-U2, solder filled, 5A Low-Medium-High With last mode memory, Smooth reflector for thrwoey beam. I will custom wrap the drop in and insert for best heat sinking if desire. $110 $105
    28. Fivemega Cooly XML-U2, solder filled, 5A Low-Medium-High With last mode memory, OP reflector for extra floody beam. I will custom wrap the drop in and insert for best heat sinking if desire.$110 $105
    29. Infared P60 Single mode 4.2v max $25



    Buy 2 or more get 10% off total order

    Please let me know if you have any questions

    Paypal: seattlecraigslist.com@gmail.com

    Free Shipping World Wide
    Last edited by vinhnguyen54; 09-04-2012 at 02:22 PM.

  2. #2

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Hey Vinh,

    I'll take"

    #1
    #17

    Jtrucktools34

  3. #3

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by jtrucktools34 View Post
    Hey Vinh,

    I'll take"

    #1
    #17

    Jtrucktools34
    Thanks!

  4. #4
    Flashaholic* BenChiew's Avatar
    Join Date
    Nov 2011
    Location
    Malaysia/Ship to Portland, Oregon
    Posts
    3,078

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Item #8 and #10. Is the UV emitter 365nm? if not, can you make one?

  5. #5

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by Benchiew View Post
    Item #8 and #10. Is the UV emitter 365nm? if not, can you make one?
    I got no clue what their wavelength is. If you want I can ship them to you to test out. If it doesn't work for you simply ship it back. If it does then send me $$$$$$$ :-)

  6. #6

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Have one of those UV drop ins for me?
    WTB --> any vintage, cross-hair logo Surefire, SW01 tailcap; Ku's SWM V-series 18500 tubes; PM me if you have a SPY007 XM-L2 SWGG for trade!


  7. #7

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by Silgt View Post
    Have one of those UV drop ins for me?
    yes

  8. #8
    Flashaholic* chipwillis's Avatar
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    1,503

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    I'll Take #7

    XP-G2 Cool White with Thrunite 1.85A High-Medium-LowLow with last mod memory driver. Light OP reflector. An excellent P60 size thrower with a flawless beam. 2.7-4.2 Price is high but I think it’s worth it. $45

  9. #9
    Flashaholic* BenChiew's Avatar
    Join Date
    Nov 2011
    Location
    Malaysia/Ship to Portland, Oregon
    Posts
    3,078

    Default

    Quote Originally Posted by vinhnguyen54 View Post
    I got no clue what their wavelength is. If you want I can ship them to you to test out. If it doesn't work for you simply ship it back. If it does then send me $$$$$$$ :-)
    When you light it up, can you see a really blueish/purple beam?
    Or you barely see the beam even in darker environment?

  10. #10

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by Benchiew View Post
    When you light it up, can you see a really blueish/purple beam?
    Or you barely see the beam even in darker environment?
    I can see a slight purple beam when it's in a lit room. When the room is dark it's a real bright UV light.

  11. #11

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Will take the following...

    2. XPG-R4 4500K excellent tint! 1.4A Low-Medium-High with last mode memory, has a heavier OP reflector for a more floody beam, 2.8-6V, solder filled pill for extra heat sinking. Tint is similar to Nichia 219 but with greater throw and efficiency. $35

    8. Single mode UV drop in 3-4.2V $25
    WTB --> any vintage, cross-hair logo Surefire, SW01 tailcap; Ku's SWM V-series 18500 tubes; PM me if you have a SPY007 XM-L2 SWGG for trade!


  12. #12
    Flashaholic* BenChiew's Avatar
    Join Date
    Nov 2011
    Location
    Malaysia/Ship to Portland, Oregon
    Posts
    3,078

    Default

    Quote Originally Posted by vinhnguyen54 View Post
    I can see a slight purple beam when it's in a lit room. When the room is dark it's a real bright UV light.
    Then it is not the 365nm emitter.
    Can you check with your suppliers and see if you can procure the 365 emitters.
    If you can, please build me 2pcs. This is a firm order. Thanks.

  13. #13
    Flashaholic CrazyIvan2011's Avatar
    Join Date
    Nov 2011
    Location
    United Kingdom
    Posts
    203

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Is there more than one of each on offer? I notice some have ordered the u.v. etc but it is not listed as 'sold'.

    If available, could I order the following;

    10.) Single mode UV drop in 3-4.2V $25


    25.) XML-T6 3.02A Moonlight-Medium-High with last mode memory 2.5-4.5V OP reflector. $25

    (just to check, both these will be fine with single 18650, solarforce host)


    $50 with 10% discount (if still on offer) $45 total?

    If available I will PayPal soon as

  14. #14
    Flashaholic* BenChiew's Avatar
    Join Date
    Nov 2011
    Location
    Malaysia/Ship to Portland, Oregon
    Posts
    3,078

    Default

    Just for the record, I am not taking the uv drop in. Silght has taken one, therefore number 10 is good to go to Ivan.

  15. #15
    Flashaholic ykb's Avatar
    Join Date
    Nov 2007
    Location
    UK
    Posts
    101

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Hi vinhnguyen54,
    Any idea how many lumens the med mode is on #6, please? I hope it's about 150
    Thanks,
    ykb

  16. #16

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Go ahead and paypal. The items you want are still available. I will park them SOLD now.

    Quote Originally Posted by CrazyIvan2011 View Post
    Is there more than one of each on offer? I notice some have ordered the u.v. etc but it is not listed as 'sold'.

    If available, could I order the following;

    10.) Single mode UV drop in 3-4.2V $25


    25.) XML-T6 3.02A Moonlight-Medium-High with last mode memory 2.5-4.5V OP reflector. $25

    (just to check, both these will be fine with single 18650, solarforce host)


    $50 with 10% discount (if still on offer) $45 total?

    If available I will PayPal soon as

  17. #17

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by ykb View Post
    Hi vinhnguyen54,
    Any idea how many lumens the med mode is on #6, please? I hope it's about 150
    Thanks,
    ykb
    Thats a 5/30/100 driver at 2.8A that drop in should kick out 800 LED lumen

    .3*2.8= .84A = about 250-270 lumen according to Match's XML testing results.

  18. #18

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Five Mega Cooly added.

  19. #19
    Flashaholic CrazyIvan2011's Avatar
    Join Date
    Nov 2011
    Location
    United Kingdom
    Posts
    203

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    PayPal sent for number 10.) and 25.)


    What are the estimated lumes for number 25.) ? I only wonder as it is moonlight not low (is low usually 5%).

    I will figure out how to work the numbers out my self eventually! I already have one of your excellent drop ins, it was 2.5a I think, and neutral...so im guessing this will be noticeably brighter

  20. #20

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    I think its draws 5mah...Lumen wise I am not cartain.

    Quote Originally Posted by CrazyIvan2011 View Post
    PayPal sent for number 10.) and 25.)


    What are the estimated lumes for number 25.) ? I only wonder as it is moonlight not low (is low usually 5%).

    I will figure out how to work the numbers out my self eventually! I already have one of your excellent drop ins, it was 2.5a I think, and neutral...so im guessing this will be noticeably brighter

  21. #21
    Flashaholic ykb's Avatar
    Join Date
    Nov 2007
    Location
    UK
    Posts
    101

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by vinhnguyen54 View Post
    Thats a 5/30/100 driver at 2.8A that drop in should kick out 800 LED lumen

    .3*2.8= .84A = about 250-270 lumen according to Match's XML testing results.
    I'll pass for now. Thanks for your reply :-)

  22. #22

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by ykb View Post
    I'll pass for now. Thanks for your reply :-)
    Sounds like 9 or 22 may be better if that level of medium is important to you.
    Diffusing would soften a higher output medium and may serve your purpose as well.

  23. #23

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    YKB. I can also ways you a drop in to your exact liking if you want... :-)

  24. #24

    Default

    Pm sent.

    Sent from my XT320 using Tapatalk 2

  25. #25
    Enlightened Antec's Avatar
    Join Date
    Aug 2012
    Location
    Manila
    Posts
    34

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Hi, would you happen to have Lux estimates @1 meter on item #7?
    Last edited by Antec; 08-26-2012 at 01:28 AM.

  26. #26

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by Antec View Post
    Hi, would you happen to have Lux estimates @1 meter on item #7?
    Number 7 above is sold. I can make another similar with a 7135 based driver. Lux is about 10K I think...

  27. #27

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Price Drop

  28. #28
    Enlightened Antec's Avatar
    Join Date
    Aug 2012
    Location
    Manila
    Posts
    34

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by vinhnguyen54 View Post
    Number 7 above is sold. I can make another similar with a 7135 based driver. Lux is about 10K I think...
    Thanks for the reply.

    I guess it is too much to hope for 18K ~ 20K lux with the XP-G2 on a P60 sized reflector.

  29. #29

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by Antec View Post
    Thanks for the reply.

    I guess it is too much to hope for 18K ~ 20K lux with the XP-G2 on a P60 sized reflector.
    In a maelstrom G5 or Amrytek Predator reflector then yes but not P60 reflector.

  30. #30
    Enlightened Antec's Avatar
    Join Date
    Aug 2012
    Location
    Manila
    Posts
    34

    Default Re: vinhnguyen54 New Assembled drop in for sale 8.18.2012

    Quote Originally Posted by vinhnguyen54 View Post
    In a maelstrom G5 or Amrytek Predator reflector then yes but not P60 reflector.
    Maybe with one of those P60 lens and spacer kits it would.

    Will wait for your next batch of goodies then.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •