Phoenix Electroforms
Results 1 to 4 of 4

Thread: Looking for a 1 x AA or 2 x AA Titanium...

  1. #1

    Default Looking for a 1 x AA or 2 x AA Titanium...

    I am looking for a nice 1xAA or 2xAA titanium flashlight.

    I really like the looks of the Sunwayman V10R+ Ti without the AA extender but once the extender is added, it looks a little funny, kinda like a nut on a bolt. I am curious to know how much the AA drops the output of this light vs the CR123 or 16340. Also, does the thinner AA battery rattle around in the flashlight. Any pictures with the AA extender installed would be greatly appreciated.

    I also like the EagleTac D25A Ti Clicky but is the rated output of 176 lumens on the 14500 or AA? Is the rated output OTF or LED?

    Is that it, are there any other titanium flashlights?

  2. #2

    Default

    Quote Originally Posted by mstgkillr View Post
    I also like the EagleTac D25A Ti Clicky but is the rated output of 176 lumens on the 14500 or AA? Is the rated output OTF or LED?
    176 is LED - it's 122 OTF on Alk, NiMh, Li Primary. It much brighter on a 14500 (500ish?) but goes into direct drive so you lose most of the lower modes. Low lumen runtimes are going to be much better on clicky, if that matters to you.

  3. #3

    Default Re: Looking for a 1 x AA or 2 x AA Titanium...

    McGizmo makes a 2xAA clickie pack that fits E-Series heads. That is the only 2xAA I can think of.
    Peak and foursevens also make 1xAA lights out of Ti.

    Welcome to CPF!!!




    Barry
    Changing the world one Flashoholic at a time...

  4. #4
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,139

    Default

    Out of production, and expensive, the kuku427 Volere ... a custom titanium (1x) AA torch
    IF 2 = 1 THEN 1 = 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •