NITECORE -- Keep Innovating        
Page 2 of 36 FirstFirst 12345678912 ... LastLast
Results 31 to 60 of 1066

Thread: Custom Triple Copper Surefire E1e & E2e (XPL/XGP2/219)

  1. #31

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by sassaquin View Post
    Check out Oveready Insider 38, it showcases these limited lights and addresses how they will be released over the next few months. I lucked out and was able to score a triple copper E1e in the wee hours of the night yesterday.
    I send them an email wanting to purchase both the E1E and E2E just a couple of days back, and was told it was sold out immediately! They told me that I was to be notified when it is to be made available again. Something just don't tally if you are able to get one just yesterday???

    I just want to buy a light and don't intend to change my life style or waste my life away by camping out at their web site all day & night...
    WTB --> any vintage, cross-hair logo Surefire, SW01 tailcap; Ku's SWM V-series 18500 tubes; PM me if you have a SPY007 XM-L2 SWGG for trade!


  2. #32
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    1,057

    Default Re: TorchLAB V4 Triple LED drop ins - Full Boost, Thermal, and Voltage Regulation

    Quote Originally Posted by FPSRelic View Post
    Interesting. I haven't even got an insider email yet. Must be in the mail
    +1
    I also just tried to relist for it but it will not let me ?

    Pm sent

    thx
    WTB: Surefire -6, Z44 Bezels with logo’s ? Any logo, early Z44 bezel's new condition Blk or HA,and anything rare Surefire

  3. #33

    Default Re: TorchLAB V4 Triple LED drop ins - Full Boost, Thermal, and Voltage Regulation

    Quote Originally Posted by samuraishot View Post
    The triple heads of the E1e and E2e are the same right? So I can run the Triple from an E1e body on an E2e body?
    e1 and e2 heads are internally identical. The only differences are color (black/nat) and LED (219/xpg2)


    Are there any plans for an e-series Triad?
    Quote Originally Posted by Silgt View Post
    Yes an option with an E-series Triad tail will be perfect
    Not with existing methods, but we are lining up a five axis machine that may make these easier/possible.


    Quote Originally Posted by sassaquin View Post
    I lucked out and was able to score a triple copper E1e in the wee hours of the night yesterday.
    Yeah, I was holding that one for myself then decided it wasn't fair so posted it a few minutes before you checked.


    Quote Originally Posted by KuanR View Post
    Is it possible to send an E1E to you guys to be modded in a similar fashion?
    Even in batches, each of these represents massive work/time/investment. We will not have the energy for more when they (new units) are done. Plenty more E2's are on the way.


    Quote Originally Posted by toby_pra View Post
    Are there any for sale or not?

    These are great mods, i really would like to purchase one, but
    i have some problems to look thruogh this thread.
    Quote Originally Posted by Silgt View Post
    I think they were all sold out within minutes...
    Sorry for the confusion. I've added release schedules to post 1. These will updated with replies to this thread.


    I just tried to relist for it but it will not let me ?
    PM replied. Anyone not receiving the Insider email but expecting to, please EM/PM on the status of your email address. All Insiders are archived here.
    Last edited by ElectronGuru; 09-09-2012 at 10:26 AM.
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  4. #34
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    that looks so awesome!

    edit: I got the insider email on sept. 6 at 5:16pm EST
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  5. #35
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NJ
    Posts
    822

    Default

    @nfetterly & EG, thanks for the info!

  6. #36
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    3,667

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by samuraishot View Post
    @nfetterly & EG, thanks for the info!
    I get mine tomorrow - I ordered an extra copper shroud.


    No need to bump this up, but received my E1e 219 triple & E2e XPG2 triple. VERY VERY nice. I haven't swapped the heads around yet to see the 219 on two cells, but either one is bright at the second level, good for probably 80% of my use (10% -15% use is at low level). Won't need the high very often or for very long. I will run it for a while and see how it compares to some of my other bright high amperage lights.

    Incidentally - love the black Ha on the E1e 219. Taking that one with me tomorrow on my trip.
    Last edited by nfetterly; 09-10-2012 at 02:09 PM.


  7. #37
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NJ
    Posts
    822

    Default

    Here are some photos of mine



    I agree with nfetterly, the 2nd level is plenty bright - I actually thought it was already on the 3rd level when it was on the 2nd, then I clicked again, and wham! I compared it to my Milky Expurgator, which has an XPG R51C, but it seems the XPG2 is not as icy, which I like
    Last edited by samuraishot; 09-10-2012 at 04:49 PM.

  8. #38
    Flashaholic* Edwood's Avatar
    Join Date
    Aug 2006
    Location
    SoCal
    Posts
    994

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Looks great.

    Beamshots? Especially comparison ones?

    Thanks.
    Small: MJP Extreme III Orb Raw Ti and NS
    Medium: Oveready Triple Copper E2e
    MJP-E3e (15-3Ostar) Surefire L4 (MC-E) LensLight Mini
    Large: Surefire M6-WA1185 M-Zep MZXR-7a

  9. #39
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    3,667

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by Edwood View Post
    Looks great.

    Beamshots? Especially comparison ones?

    Thanks.
    I can probably get some done on the weekend. It's similar to the earlier triples they released before (from memory) but in much smaller sizes. I personally really like the XP-E triple because it has alot more throw than most of tthe triples. This one is similar to most. A WALL OF LIGHT in a very small package.


  10. #40
    Enlightened
    Join Date
    Nov 2008
    Location
    N Texas
    Posts
    78

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    I would love to get one of these, staying tuned.

  11. #41
    Flashaholic* Moddoo's Avatar
    Join Date
    Nov 2008
    Location
    Minnesota
    Posts
    1,243

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Hey Guys,

    I am working on more of these lights this week.

    We hope to have them available to you soon.

    Thanks for all of the photos etc. We are really excited to offer these.

    -Tom

  12. #42
    Flashaholic* ShineOnYouCrazyDiamond's Avatar
    Join Date
    Aug 2009
    Location
    CT, USA
    Posts
    4,442

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    These are really awesome. I hope to be able to snag an E1 during these runs.

    Are all the neutral versions going to be Nichia219 LEDs or can you offer it with a LMH H3 drop-in with neutral XP-Gs for the extra lumens?

  13. #43

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    What is the voltage range for this light engine?
    Will it run at regulated/full output on a single cell in the e1?

    Thanks.

  14. #44
    *Flashaholic* PoliceScannerMan's Avatar
    Join Date
    Jul 2005
    Location
    Gainesville,FL
    Posts
    8,051

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by Zot View Post
    What is the voltage range for this light engine?
    Will it run at regulated/full output on a single cell in the e1?

    Thanks.
    Heres the specs, same engine.

  15. #45

    Default

    Quote Originally Posted by ShineOnYouCrazyDiamond View Post
    Are all the neutral versions going to be Nichia219 LEDs or can you offer it with a LMH H3 drop-in with neutral XP-Gs for the extra lumens?
    All planned E1 are XPG2c/219n only. Making an XPG2n version would require stopping production until such boards could be produced. This would push remaining availability back to November.

    E2 supplies are better, making an XPG2n version easier, so more likely. But still not anytime soon.
    Last edited by ElectronGuru; 09-12-2012 at 09:12 AM.
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  16. #46
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    3,667

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Used the E1E extensively in industrial site in Miami today (well just outside Miami), so ambient temperature was pretty high as was the humidity inside a paper mill. Ran it on high a few times as I clicked up too quickly. I could have easily have used it in medium - I only realized it was in high as after a few minutes it started to get pretty warm - as I would expect in high. So medium is fantastic, high is fantastic +++, - but do you really need to run it there for that long? Great light. Great tint / CRI. A mill employee was using a light my company had given away. I had to bite my tongue becayuse our customers liked them - but.......

    Great job guys!


  17. #47
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NJ
    Posts
    822

    Default

    EG, is the bezel removable or is it not recommended? I was thinking of putting an E2d bezel on the triple copper.

    ALSO, is the lens stock or is it UCL? Just curious

  18. #48

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    New to CPF but not new to SF (having used there products since their inception) I too would love to either get my hands on both sizes of OR's "E" series customs or have them mod my own. I have read all of the posts under this topic and saw at least one or both of these questions posed but did not catch an answer (your eyes go when you get to my age along with other parts). 1: Does OR have a contact phone number and 2: can OR mod any of my personal "E" series lights that I own? Being a Cardio-pulmonary specialist and having a trip coming up the first of November to Chengdu, China for the entire month it would be great to take a quality American made product to waive under the noses of my Chinese counterparts in the hospitals there (and believe me when I say that they drool over great quality the same as anyone). I have subscribed to the insider and watch this post with great anticipation. Great lighting means everything to many in the medical industry. Wish we had had these in 1972!

  19. #49
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NJ
    Posts
    822

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by Ghostwalker54 View Post
    New to CPF but not new to SF (having used there products since their inception) I too would love to either get my hands on both sizes of OR's "E" series customs or have them mod my own. I have read all of the posts under this topic and saw at least one or both of these questions posed but did not catch an answer (your eyes go when you get to my age along with other parts). 1: Does OR have a contact phone number and 2: can OR mod any of my personal "E" series lights that I own? Being a Cardio-pulmonary specialist and having a trip coming up the first of November to Chengdu, China for the entire month it would be great to take a quality American made product to waive under the noses of my Chinese counterparts in the hospitals there (and believe me when I say that they drool over great quality the same as anyone). I have subscribed to the insider and watch this post with great anticipation. Great lighting means everything to many in the medical industry. Wish we had had these in 1972!
    Welcome Ghostwalker54! You can email directly and they're wonderful to work with Their email address can be found on the OR website, good luck!

  20. #50

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Thanks! I did that and have conversed with D but never received an answer back on mod'ing one of my own. Very nice people though. I'll keep watching this thread and wait for the next Insider to come out. My long hours and heavy patient load hampers my ability to watch the thread and and check my emails. I'll hope for the best knowing that there are a thousand or more people waiting anxiously (just as I am) for the next run to come out.

  21. #51
    Flashaholic* Moddoo's Avatar
    Join Date
    Nov 2008
    Location
    Minnesota
    Posts
    1,243

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by samuraishot View Post
    EG, is the bezel removable or is it not recommended? I was thinking of putting an E2d bezel on the triple copper.

    ALSO, is the lens stock or is it UCL? Just curious
    The bezel is glued in place.
    We do not recommend trying to remove it.

    The Lens is Stock SF glass

  22. #52

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by Moddoo View Post
    The Lens is Stock SF glass
    Can I custom a UCL before they are built and glued? I can prepay for the light if that's OK?
    WTB --> any vintage, cross-hair logo Surefire, SW01 tailcap; Ku's SWM V-series 18500 tubes; PM me if you have a SPY007 XM-L2 SWGG for trade!


  23. #53
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NJ
    Posts
    822

    Default

    Quote Originally Posted by Moddoo View Post
    The bezel is glued in place.
    We do not recommend trying to remove it.

    The Lens is Stock SF glass
    Thanks for the info, Moddoo

  24. #54
    Flashaholic* Moddoo's Avatar
    Join Date
    Nov 2008
    Location
    Minnesota
    Posts
    1,243

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by Silgt View Post
    Can I custom a UCL before they are built and glued? I can prepay for the light if that's OK?
    The Glass size is 22.55mm x 2.67mm.
    We do not have a source for this size UCL.

  25. #55

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Moddoo, is there anyone out in the marketplace that will custom cut glass for these lights?

  26. #56
    *Flashaholic* PoliceScannerMan's Avatar
    Join Date
    Jul 2005
    Location
    Gainesville,FL
    Posts
    8,051

    Default

    Glass looks good on my copper E2e.

  27. #57

    Default

    Quote Originally Posted by Ghostwalker54 View Post
    Moddoo, is there anyone out in the marketplace that will custom cut glass for these lights?
    Doing it at all economically requires hundreds of units, beyond the scope of this project, which is based on discontinued (impossible to get more) flashlights. Pulling out all the stops would require starting from scratch, providing both scale and control over all parts.
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  28. #58
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    3,667

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by ElectronGuru View Post
    this project, which is based on discontinued (impossible to get more) flashlights.
    And thank you for taking the time to round up the E series lights to do this!


  29. #59

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Those E1's look really sweet. Don't know if I will be able to resist the next run.
    "It's not rocket surgery"

  30. #60

    Default Re: Custom Triple Copper Surefire E1e & E2e (XGP2/219)

    Quote Originally Posted by nfetterly View Post
    And thank you for taking the time to round up the E series lights to do this!
    Haven't been able to show much love for the E fans and had to do something before they dissapeared!
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

Page 2 of 36 FirstFirst 12345678912 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •