Sold/Expired WITHDRAWN: Gatlight V1, V2, V3 (Pics added)

shado · Oct 7, 2012

Gatlight V1, V2, V3 (Pics added)

For Sale,

GatLight V1 168 Pila SS Serial #25
GatLight V2 Aluminum No serial number
GatLight V3 Titanium Serial #101

GatLight V1 168S Pila Stainless Steel / V2 Aluminum / V3 Titanium

GatLight V3 Titanium / V2 Aluminum / V3 Titanium / V1 168S Pila Stainless Steel

The GatLight V1 168 Pila SS shown inside its original case.
The GatLight V3 Titanium sitting on top of its original case
The GatLight V2 has no case or serial number. To the best of my knowledge GatLight V2 lights did not come with either.

GatLight V1 168 Pila SS Serial #25 with GID battery (1 of 15 made)

GatLight V2 Aluminum (1 of 35 made)

GatLight V3 Titanium Serial #101

GatLight V1 168S Pila Stainless Steel / V2 Aluminum / V3 Titanium

Sold only as a set WithdrawnShipped w/tracking and insured in Canadian, International at cost (Please send me a PM for details). First "I'll take it" (followed buy a PM) with prompt Paypal gets it. This is posted on other forums, so time stamp applies I reserve the right to refuse sale to anyone.

Thanks
Todd

tobrien · Oct 7, 2012

Re: FS: Gatlight V1, V2, V3

jeez louise i can't wait to see the pic of this stuff!

jmpaul320 · Oct 8, 2012

Re: FS: Gatlight V1, V2, V3 (Pics added)

Wow.. just.... wow

mr.lumen · Oct 8, 2012

Re: FS: Gatlight V1, V2, V3 (Pics added)

amazing. post if you decide to break them up!

shado · Oct 8, 2012

Re: FS: Gatlight V1, V2, V3 (Pics added)

I'm glad everyone likes the pics :wave: Here's a night shot of the GatLight V1 Pila 168S,

I will be withdrawing these lights tomorrow afternoon.

Thanks
Todd

shado · May 1, 2013

Back up for sale with a big price drop

archimedes · May 1, 2013

A couple of questions on the Pila168 version ....

Will it run properly on a modern 17670 cell?

Is that an internal "sleeve" visible through the "struts", or is that just what the wrapper looks like for those old Pila168 batteries?

Thanks!

shado · May 1, 2013

archimedes said:
A couple of questions on the Pila168 version ....

Will it run properly on a modern 17670 cell?

Is that an internal "sleeve" visible through the "struts", or is that just what the wrapper looks like for those old Pila168 batteries?

Thanks!

I'm not sure if it will run on a 17670 cell, it's made to run with a 18650 cell? The Pila comes with a 18650 GID battery, that looks really cool in the dark (as seen in the pic above). The GID battery has no sleeve, but I'm sure it would be easy enough to make one for any of the GatLights.

archimedes · May 1, 2013

shado said:
I'm not sure if it will run on a 17670 cell, it's made to run with a 18650 cell? The Pila comes with a 18650 GID battery, that looks really cool in the dark (as seen in the pic above). The GID battery has no sleeve, but I'm sure it would be easy enough to make one for any of the GatLights.

I think maybe my questions were confusingly worded ...

* Do you know if the Pila168S/Pila168A is completely compatible with the 17670/18650 equivalent battery for powering this light?

* If the battery is removed from the light, can you see straight through the bars, or is there something inside that surrounds the battery?

Hope that is clearer

shado · May 1, 2013

archimedes said:
I think maybe my questions were confusingly worded ...

* Do you know if the Pila168S/Pila168A is completely compatible with the 17670/18650 equivalent battery for powering this light?

* If the battery is removed from the light, can you see straight through the bars, or is there something inside that surrounds the battery?

Hope that is clearer

* Do you know if the Pila168S/Pila168A is completely compatible with the 17670/18650 equivalent battery for powering this light?

Not sure, I'll have to check to GatLight sight later today.

* If the battery is removed from the light, can you see straight through the bars, or is there something inside that surrounds the battery?

Yes, you can see staight though the bars with the battery removed.

archimedes · May 1, 2013

Thanks for info!

I might have interest in the steel Pila168, if you would consider selling separately.

PM to discuss details would be welcome....

shado · May 3, 2013

archimedes said:
Thanks for info!

I might have interest in the steel Pila168, if you would consider selling separately.

PM to discuss details would be welcome....

Sorry, looking to sell as a set.

Trades welcome, looking for Peter Rassenti Integral and Les George folders.

Thanks
Todd

persco · May 3, 2013

Hey Todd,

you may want to change the title of the thread. It still says WITHDRAWN, so that may be confusing to some...

archimedes · May 3, 2013

shado said:
Sorry, looking to sell as a set.
....
Thanks
Todd

No problem, good luck with your sale.

shado · May 4, 2013

persco said:
Hey Todd,

you may want to change the title of the thread. It still says WITHDRAWN, so that may be confusing to some...

I tried to change it with no luck, maybe a mod can help?

shado · May 6, 2013

I reported this thread a couple of days ago requesting a title change, but it looks like it can't be done? Thanks for all the PMs, but I'm withdrawing this for good.

Thanks
Todd

You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

Sold/Expired WITHDRAWN: Gatlight V1, V2, V3 (Pics added)

shado

Flashlight Enthusiast

tobrien

Flashlight Enthusiast

jmpaul320

Flashlight Enthusiast

mr.lumen

Enlightened

shado

Flashlight Enthusiast

shado

Flashlight Enthusiast

archimedes

Flashaholic

shado

Flashlight Enthusiast

archimedes

Flashaholic

shado

Flashlight Enthusiast

archimedes

Flashaholic

shado

Flashlight Enthusiast

persco

Enlightened

archimedes

Flashaholic

shado

Flashlight Enthusiast

shado

Flashlight Enthusiast

Similar threads

Latest posts