ElectronGuru
Flashaholic
This thread is for folks who want to know if the newest 3100 3400 will also fit (actually slide inside) their current/potential setup.
Please reply to this thread with cell/body combinations you have tested or links to posts where someone else has. Or consider inviting them to post here:
18650/3500's don't fit (without modification)
3500 LG MJ1
18650/3400's fit naturally
AW 3400 + TorchLAB TL50, TL65
AW 3400 + TorchLAB TL100, TL130
AW 3400 + OR bored Surefire 6P, C2, Z2
AW 3400 + OR bored Surefire A14, A19
AW 3400 + Malkoff MD2 (mixed reports, see below)
AW 3400 + Malkoff MD4 (mixed reports, see below)
AW 3400 + Solarforce L2T
AW 3400 + Ronac P2X Fury
Redilast 3400 + Ronac P2X Fury
18650/3400's fit snugly
Orbtronics 3400 + Ronac P2X Fury
EagleTac 3400 + OR bored Surefire 6P, C2, Z2 (snug and will fall in/out with just gravity)
EagleTac 3400 + Malkoff Hound Dog (snug and will fall in/out with just gravity)
Keeppower 3400 + Malkoff MD2 (remove label for easy movement)
Keeppower 3400 + Malkoff MD4 (remove label for easy movement)
Redilast 3400 + Malkoff MD2 (snug and won't slide in/out with just gravity)
18650/3400's don't fit (without modification)
AmpMax 3400 + OR bored Surefire 6P, C2, Z2
AmpMax 3400 + Malkoff MD2
AmpMax 3400 + Malkoff MD4
AW 3400 + Copper Triple E2e (tube is extra narrow/thin, consider AW 29/31 or IMR)
AW 3400 + Malkoff MD2 (mixed reports, see above)
AW 3400 + Malkoff MD4 (mixed reports, see above)
Callies Kustom 3400 + Malkoff MD4
Callies Kustom 3400 + Ronac P2X Fury
IntOutdoor 3400 + OR bored Surefire 6P, C2, Z2
Keeppower 3400 + OR bored Surefire 6P, C2, Z2
Orbtronic 3400 + OR bored Surefire 6P, C2, Z2
Orbtronic 3400 + TorchLAB TL50, TL65
Orbtronic 3400 + TorchLAB TL100, TL130
Orbtronic 3400 + Malkoff MD4
generic Panasonic 3400 + TorchLAB TL50, TL65
generic Panasonic 3400 + TorchLAB TL100, TL130
generic Panasonic 3400 + OR bored Surefire 6P, C2, Z2
generic Panasonic 3400 + ZebraLight sc600
generic Panasonic 3400 + ElektroLumens SAR
generic Panasonic 3400 + FireFixes3
18650/3100's fit naturally
AW 3100 + TorchLAB TL50, TL65
AW 3100 + TorchLAB TL100, TL130
AW 3100 + OR bored Surefire 6P, C2, Z2
AW 3100 + OR bored Surefire A14, A19
AW 3100 + Copper Triple E2e
18650/3100's fit snugly
Keeppower 3100 + Malkoff MD2 (with label removed)
Keeppower 3100 + Malkoff MD3 (with label removed)
generic Panasonic 3400 + Malkoff MD2
generic Panasonic 3400 + Malkoff MD4
18650/3100's don't fit (without modification)
Callies Kustom 3100 + TorchLAB TL50, TL65
Callies Kustom 3100 + TorchLAB TL100, TL130
Callies Kustom 3100 + OR bored Surefire 6P, C2, Z2
Callies Kustom 3100 + OR bored Surefire A14, A19
AW 2600 are thicker than more modern 3100/3400 chemistries. In our experience, 90%+ still fit OR and TL bodies, but each cell must be hand tested.
18500
Keeppower 18500 + OR bored Surefire 9P does not fit
Keeppower 18500 + Malkoff MD3 does not fit
Please reply to this thread with cell/body combinations you have tested or links to posts where someone else has. Or consider inviting them to post here:
3500
18650/3500's don't fit (without modification)
3500 LG MJ1
3400
18650/3400's fit naturally
AW 3400 + TorchLAB TL50, TL65
AW 3400 + TorchLAB TL100, TL130
AW 3400 + OR bored Surefire 6P, C2, Z2
AW 3400 + OR bored Surefire A14, A19
AW 3400 + Malkoff MD2 (mixed reports, see below)
AW 3400 + Malkoff MD4 (mixed reports, see below)
AW 3400 + Solarforce L2T
AW 3400 + Ronac P2X Fury
Redilast 3400 + Ronac P2X Fury
18650/3400's fit snugly
Orbtronics 3400 + Ronac P2X Fury
EagleTac 3400 + OR bored Surefire 6P, C2, Z2 (snug and will fall in/out with just gravity)
EagleTac 3400 + Malkoff Hound Dog (snug and will fall in/out with just gravity)
Keeppower 3400 + Malkoff MD2 (remove label for easy movement)
Keeppower 3400 + Malkoff MD4 (remove label for easy movement)
Redilast 3400 + Malkoff MD2 (snug and won't slide in/out with just gravity)
18650/3400's don't fit (without modification)
AmpMax 3400 + OR bored Surefire 6P, C2, Z2
AmpMax 3400 + Malkoff MD2
AmpMax 3400 + Malkoff MD4
AW 3400 + Copper Triple E2e (tube is extra narrow/thin, consider AW 29/31 or IMR)
AW 3400 + Malkoff MD2 (mixed reports, see above)
AW 3400 + Malkoff MD4 (mixed reports, see above)
Callies Kustom 3400 + Malkoff MD4
Callies Kustom 3400 + Ronac P2X Fury
IntOutdoor 3400 + OR bored Surefire 6P, C2, Z2
Keeppower 3400 + OR bored Surefire 6P, C2, Z2
Orbtronic 3400 + OR bored Surefire 6P, C2, Z2
Orbtronic 3400 + TorchLAB TL50, TL65
Orbtronic 3400 + TorchLAB TL100, TL130
Orbtronic 3400 + Malkoff MD4
generic Panasonic 3400 + TorchLAB TL50, TL65
generic Panasonic 3400 + TorchLAB TL100, TL130
generic Panasonic 3400 + OR bored Surefire 6P, C2, Z2
generic Panasonic 3400 + ZebraLight sc600
generic Panasonic 3400 + ElektroLumens SAR
generic Panasonic 3400 + FireFixes3
3100
18650/3100's fit naturally
AW 3100 + TorchLAB TL50, TL65
AW 3100 + TorchLAB TL100, TL130
AW 3100 + OR bored Surefire 6P, C2, Z2
AW 3100 + OR bored Surefire A14, A19
AW 3100 + Copper Triple E2e
18650/3100's fit snugly
Keeppower 3100 + Malkoff MD2 (with label removed)
Keeppower 3100 + Malkoff MD3 (with label removed)
generic Panasonic 3400 + Malkoff MD2
generic Panasonic 3400 + Malkoff MD4
18650/3100's don't fit (without modification)
Callies Kustom 3100 + TorchLAB TL50, TL65
Callies Kustom 3100 + TorchLAB TL100, TL130
Callies Kustom 3100 + OR bored Surefire 6P, C2, Z2
Callies Kustom 3100 + OR bored Surefire A14, A19
2600
AW 2600 are thicker than more modern 3100/3400 chemistries. In our experience, 90%+ still fit OR and TL bodies, but each cell must be hand tested.
18500
Keeppower 18500 + OR bored Surefire 9P does not fit
Keeppower 18500 + Malkoff MD3 does not fit
Last edited: