Malkoff        
Page 1 of 70 123456781151 ... LastLast
Results 1 to 30 of 2091

Thread: WTS: P60 Drop in Light Engine

  1. #1

    Default WTS: P60 Drop in Light Engine

    P60 Drop in Light Engine

    V54 / Sky Lumen MUST READ & Agree Terms (Click Here)

    General Guidelines that applies to all of my P60/D26 XML Drop in
    - Please wrap the drop in tightly with aluminum foil before inserting it into your host. PM me if you are unsure how to do this.
    - All LEDs are directly bonded to copper

    - If you want shipping insurance Email me

    +$5 international shipping per drop in

    1. P60vnL: Balance of flood and throw $80,
    1450/1220, 55K/47K
    XML2 6500K, 5000K, 4000K Dome On or U3 PDT all with
    DriverVN2 & Smooth reflector, 1 cell

    2. P60vnP: Best Throw
    $90, 825/710, 70K/60K
    XPG2 PDT + Smooth reflector + DriverVN2
    , 1 cell

    3. P60vnT: Solid Copper Triples
    Click Here


    Nothing fit your needs? Email me at vinhnguyen54@gmail.com for a custom light engine :-)

    Paypal/Email: vinhnguyen54@gmail.com

    Last edited by vinhnguyen54; 09-19-2015 at 11:15 AM.

  2. #2
    Flashaholic* KuanR's Avatar
    Join Date
    Jan 2012
    Location
    Macau S.A.R.
    Posts
    1,800

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    This new thread is now much easier to follow all the drop in options you offer. I'm excited to see you got the XP-E2's in neutral, can you get them (or if available yet) in 5000k? And what's the max drive current you would advice for the XP-E2?
    Last edited by KuanR; 12-17-2012 at 02:37 PM.
    I'm Ryan.

  3. #3

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by KuanR View Post
    This new thread is now much easier to follow all the drop in options you offer. I'm excited to see you got the XP-E2's in neutral, can you get them (or if available yet) in 5000k? And what's the max drive current you would advice for the XP-E2?
    I think I placed an order for 4000K so that's what I will have for now. If you want 5000K I probably get that too.

    1.8A seems to be a good current

    EDIT: XP-E2 5000K order placed and is now ready for preorder

  4. #4
    Flashaholic* KuanR's Avatar
    Join Date
    Jan 2012
    Location
    Macau S.A.R.
    Posts
    1,800

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Great to hear I'm still waiting for the de-domed XM-L U3 drop in. I'm watching the mail box like a hawk.

    Also, is there a difference for the XM-L2's between a direct drive 5-6amps and the multi-mode high current set to 5-6amps? Would the direct drive still be brighter?
    I'm Ryan.

  5. #5

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by KuanR View Post
    Great to hear I'm still waiting for the de-domed XM-L U3 drop in. I'm watching the mail box like a hawk.

    Also, is there a difference for the XM-L2's between a direct drive 5-6amps and the multi-mode high current set to 5-6amps? Would the direct drive still be brighter?

    Same brightness

  6. #6
    Flashaholic* jmpaul320's Avatar
    Join Date
    Mar 2012
    Location
    CT, USA
    Posts
    3,800

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    I am glad I have secured one of the new xml2s... theyre going to go quick!

  7. #7

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by jmpaul320 View Post
    I am glad I have secured one of the new xml2s... theyre going to go quick!
    I ordered 15. You got the first one :-)

  8. #8
    Flashaholic* jmpaul320's Avatar
    Join Date
    Mar 2012
    Location
    CT, USA
    Posts
    3,800

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by vinhnguyen54 View Post
    I ordered 15. You got the first one :-)


    only fitting that the first xml2 on CPF enters my p60 hot rod show down

    maybe it just might.... win?

    tough competition though

    either way it will be an excellent drop in
    Last edited by jmpaul320; 12-17-2012 at 04:44 PM.

  9. #9
    Enlightened Zigo45's Avatar
    Join Date
    Jul 2012
    Location
    Western Washington
    Posts
    48

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    PP sent for XM-L2 5000K / 4,560 mA (+$4) / no mode memory / H, M, LL / LOP reflector.

    Thank you!

  10. #10

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    I'll have to take 1× XM-L2 5000K, H/M/LL w/memory, 5840mA, textured reflector...this should be fun!
    Last edited by Silgt; 12-17-2012 at 06:29 PM.
    WTB --> any vintage, cross-hair logo Surefire, SW01 tailcap; Ku's SWM V-series 18500 tubes; PM me if you have a SPY007 XM-L2 SWGG for trade!


  11. #11

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    a $35 1-Mode Direct Drive XML-2 4.2V Max. 5-6amp Smooth Reflector.
    Last edited by BIGLOU; 12-17-2012 at 09:45 PM.

  12. #12
    Flashaholic jaycyu's Avatar
    Join Date
    Jun 2012
    Location
    Vancouver BC Canada
    Posts
    413

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    For the XML2 DD, do I get to pick 6A over 5A when ordering, or does its amperage decreases from 6A to 5A as it drains the battery?

  13. #13

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by jaycyu View Post
    For the XML2 DD, do I get to pick 6A over 5A when ordering, or does its amperage decreases from 6A to 5A as it drains the battery?
    5A-6A are current from a AW2900 18650. Do not run this drop in with any battery larger than 18650. If you are running Small cells make sure to use IMR. Small cells might only pull 3-4A. Larger than 18650 cells will pull LED life threatening current LOL

  14. #14
    Flashaholic* KuanR's Avatar
    Join Date
    Jan 2012
    Location
    Macau S.A.R.
    Posts
    1,800

    Default Vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 219

    Lol life threatening...
    Vinh you need to de-dome the new XM-L2 and see how it performs
    I'm Ryan.

  15. #15

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    FREE FIRST CLASS SHIPPING WORLDWIDE! Lost packages will not be responsible by me.

    +$5 for Shipping insurance, USPS
    Priority and Delivery confirmation in the USA. Otherwise I will take a picture of your shipped package as proof of shipment.

  16. #16

    Default Re: Vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Payment incoming for:

    Custom tall P60 sized for the Pentagon X3 (per our PM convo)
    XM-L2 6500K
    3-12v (for use w/ 3*CR123s)
    1.5A
    3 mode (LL/M/H if possible, but either way will work)
    OP reflector

  17. #17

    Default Re: Vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    All orders recorded!

    Quote Originally Posted by thejrod View Post
    Payment incoming for:

    Custom tall P60 sized for the Pentagon X3 (per our PM convo)
    XM-L2 6500K
    3-12v (for use w/ 3*CR123s)
    1.5A
    3 mode (LL/M/H if possible, but either way will work)
    OP reflector

  18. #18
    Flashaholic* jmpaul320's Avatar
    Join Date
    Mar 2012
    Location
    CT, USA
    Posts
    3,800

    Default vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 219

    Vinh - if the xml2 can be reliably pushed higher than 4.53a (my order) can you let me know? I may want to go a bit higher if its safe and there are reasonable gains. I don't want to blow the emitter, but I would like a nice 30-60sec turbo

    If there is a price difference I will cover it

  19. #19

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Would like to add another XM-L2 5000K Direct Drive, 5-6A, OP reflector please. PM me the total and I'll get the payment over to you. Thanks!
    WTB --> any vintage, cross-hair logo Surefire, SW01 tailcap; Ku's SWM V-series 18500 tubes; PM me if you have a SPY007 XM-L2 SWGG for trade!


  20. #20

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by jmpaul320 View Post
    Vinh - if the xml2 can be reliably pushed higher than 4.53a (my order) can you let me know? I may want to go a bit higher if its safe and there are reasonable gains. I don't want to blow the emitter, but I would like a nice 30-60sec turbo

    If there is a price difference I will cover it
    If you only want 30-60 seconds then go 6A! If the Emmiter blow it's on me. After 60 seconds though it's on you. :-)

  21. #21
    Flashaholic* jmpaul320's Avatar
    Join Date
    Mar 2012
    Location
    CT, USA
    Posts
    3,800

    Default vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 219

    Quote Originally Posted by vinhnguyen54 View Post
    If you only want 30-60 seconds then go 6A! If the Emmiter blow it's on me. After 60 seconds though it's on you. :-)
    I always treat "high" and "Turbo" modes as a redline and usually just use them in short bursts for a wow factor.

    I will go with whatever you reccomend maybe after you do a few quicktests then we can nail down a current @ 5-6a depending on results? (I would think it would be similar to the XML)

  22. #22

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    One time I ran a XML-U3 up to 8A for 3 minutes long and it ran fine and was ULTRA BRIGHT..................But then again I direct bonded it to very large Copper PCB from the TN31 and sat the copper PCB in a shallow plate of water. LOL

    So if we can liquid cool these LEDs I am sure we can push them much harder. Imagine a SST-90 liquid cool or at least mounted to a radiator LOL ;-)

    Also just modded a 7G9 for a customer with a XML-U3 Dedome at 4.5A and it just outthrew my TN31 modded equivalent. But at least the hot spot is larger on the TN31 the way I like it.

    Quote Originally Posted by jmpaul320 View Post
    I always treat "high" and "Turbo" modes as a redline and usually just use them in short bursts for a wow factor.

    I will go with whatever you reccomend maybe after you do a few quicktests then we can nail down a current @ 5-6a depending on results? (I would think it would be similar to the XML)
    Last edited by vinhnguyen54; 12-18-2012 at 12:13 PM.

  23. #23
    Flashaholic* DBCstm's Avatar
    Join Date
    May 2009
    Location
    Heart of Texas
    Posts
    1,488

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Hi Vinh, good job combining this, makes it very easy to see the options. Haven't heard anything about the Nichia 219 I ordered so thought I'd make sure it didn't get lost i the switch over.

    Appreciate the video on wrapping, makes a lot of sense and I'll be sure to do it. Any thoughts on copper vs aluminumin foil? Don't know if I can actually find copper foil but if I can I might go that route.

    Thanks again for your video help, really makes a big difference!

    Dale

  24. #24
    Flashaholic jaycyu's Avatar
    Join Date
    Jun 2012
    Location
    Vancouver BC Canada
    Posts
    413

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by DBCstm View Post
    Don't know if I can actually find copper foil but if I can I might go that route.
    ProofTech has an active sales thread on CPF Market Place that supplies thick non-adhesive copper tapes sized for P60's.

    Copper has double the thermal capacity, and twice the conductive heat transfer rate.
    Thin cooking foil requires many wrapping so there will be that much more air gaps.
    Aluminum cans are coated in paint. Maybe its heat-dampening effect is negligible. Sanding the coating will create bumps, thus again air gaps.

    Thermal Conductivity Rating:
    Cu: 401
    Al: 205
    Air: 0.024
    Last edited by jaycyu; 12-18-2012 at 04:05 PM. Reason: info

  25. #25
    Flashaholic jaycyu's Avatar
    Join Date
    Jun 2012
    Location
    Vancouver BC Canada
    Posts
    413

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by vinhnguyen54 View Post
    5A-6A are current from a AW2900 18650. Do not run this drop in with any battery larger than 18650. If you are running Small cells make sure to use IMR. Small cells might only pull 3-4A. Larger than 18650 cells will pull LED life threatening current LOL
    Will an IMR 18650 draw 6A without a meltdown?

  26. #26

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    I just put together and will ship Nichia drop in for DB Custom today. Must be you ;-)



    Quote Originally Posted by DBCstm View Post
    Hi Vinh, good job combining this, makes it very easy to see the options. Haven't heard anything about the Nichia 219 I ordered so thought I'd make sure it didn't get lost i the switch over.

    Appreciate the video on wrapping, makes a lot of sense and I'll be sure to do it. Any thoughts on copper vs aluminumin foil? Don't know if I can actually find copper foil but if I can I might go that route.

    Thanks again for your video help, really makes a big difference!

    Dale

  27. #27

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by jaycyu View Post
    Will an IMR 18650 draw 6A without a meltdown?
    As far as I know. YES.

  28. #28
    Flashaholic jaycyu's Avatar
    Join Date
    Jun 2012
    Location
    Vancouver BC Canada
    Posts
    413

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by vinhnguyen54 View Post
    As far as I know. YES.

  29. #29
    Flashaholic* jmpaul320's Avatar
    Join Date
    Mar 2012
    Location
    CT, USA
    Posts
    3,800

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Quote Originally Posted by jaycyu View Post
    Will an IMR 18650 draw 6A without a meltdown?
    aw imr is rated to 10a max continuous discharge rate

    and max 4.5a charge rate so you can have one on turbo charge while you have one on turbo drain. X2

    edit: vinh - you have convinced me to go with 6A! I promise I wont pass 60 seconds
    Last edited by jmpaul320; 12-18-2012 at 04:07 PM.

  30. #30
    Flashaholic* DBCstm's Avatar
    Join Date
    May 2009
    Location
    Heart of Texas
    Posts
    1,488

    Default Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2

    Thank you kind sir!

    I will go with copper sheet, available at OnlineMetals in a 12x12 sheet at .005 thickness for $15 or so. That should allow me plenty to do more and even room to mess something up once or twice. They do have thinner, but I don't really see the point.

    Thanks for your help Jacyu and thank you Vinh!

    Dale

Page 1 of 70 123456781151 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •