Jetbeam        
Page 1 of 10 12345678 ... LastLast
Results 1 to 30 of 288

Thread: Cerakote MORE PICS ADDED

  1. #1
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Cerakote Safety Orange E2D PICS!

    THIS SERVICE IS NO LONGER AVAILABLE!!
    PLEASE READ THIS POST. ~Greta


    CERAKOTE IS SUSPENDED FOR THE TIME BEING
    Cerakote!
    Prices:
    Parts-
    Bezel Rings: $12
    Z44 sized bezels: $15
    Tailcaps: $15
    35mm & 50mm extensions: $15
    Z32 Bezels: $15
    Cryos I, II bezels: $18
    3P - 35mm Body: $20
    6P - 65mm Body: $20
    9P – 100mm Body: $20
    Complete C series lights-
    3P, 6P, 9P Body-Bezel-Tail: $45 add a bezel ring and clip for $15 with a complete light.
    Mag Bodies, M6 and Turbo heads and other metal parts will be on a case by case basis. I would have to speak to the applicator about pricing. I have no experience with them and they are a lot bigger than the ones I mentioned above.

    Click this to view colors!
    Colors:
    Forest Green
    OD Green
    Desert Verde
    Desert Sage
    Desert Sand
    Coyote Tan
    Flat Dark Earth
    Patriot Brown
    Safety Orange
    Schoolbus Yellow
    Bright White
    Zombie Green
    Bright Purple
    Stainless
    Pink
    Tactical Gray
    Sniper Gray
    Graphite Black
    Ridgeway Blue
    Burnt Bronze
    SOCOM Blue
    Some colors available may not be listed. Some colors may need to be ordered. Also will try to do colors not listed but will need interest generated.

    This is what is expected for you to get your parts coated. I will make sure everyone is kept abreast of what is going on during the whole run in this thread. This is the sales continuation of this thread.

    1) Shipping: SHIP NOW! What you ship your parts to me in is what they will be shipped back in. Unless they are damaged en route by USPS. Packing: Please ship parts in bubble wrap or plumbing supply foam insulation. Use scotch tape so I can easily remove the parts. Remove all switches, o rings, lenses, light engines, bezel rings. All parts must be completely gutted. Mark each part with the color you want. The return shipping price will be calculated on top of what you will be charged for the Cerakote. If you want insurance you must include that too. I suggest that you do insure your parcels. I will not be held responsible for USPS misplacing your parcel. I will only accept Priority Flat Rate Boxes. Please include a self-addressed Priority Shipping Label in the box. This will help me out tremendously. If this is not followed I reserve the right to ship back uncerakoted parts and refund PayPal less shipping cost. This is not negotiable. Ship first then pay so you know what the return shipping will be and you can add that in. International send you lights and I will get them done, it may take a little longer and postage will be expensive but I will get them done.

    2) Payment: PayPal only. PAY AFTER YOU SHIP Itemize all your information in the notes of the PayPal transaction ie: CPF user name, parts shipped, colors for each part, price per part or for whole light whether quoted or listed, price of return shipping with confirmation (including insurance if requested) Most important of all your return address! Copy and paste all info to this thread.

    The cool stuff !
    Ridgeway Blue SureFire 6P

    Safety Orange & Schoolbus Yellow SureFire 6P

    Safety Orange (E2D tailcap mod by MIK)






    SOCOM Blue (This is a personal user and had the marks to show it. The Cerakote covered them well and any specks are dust)




    6P Burnt Bronze/Graphite Black Clip & Mac EDC Zombie Green

    Mac EDC Zombie Green

    9P+A14+A19+ZRS=195 mm Body! (3x18650) M91AW long run time machine! Burnt Bronze

    Mac EDC Zombie Green

    6P Solarforce Clip & The LegoManiac (ZRS+A19+TL20+Moddoo Adapter+Ronac Smoothie=18650!) Burnt Bronze

    Mac EDC Zombie Green

    Mac EDC Zombie Green

    More pics to come!
    Special thanks to Oveready, Moddoo, Ronac, Mac, MIK & SureFire!
    Without all of you this wouldn't be possible.
    Last edited by Greta; 08-19-2013 at 04:45 AM.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  2. #2
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    subscribing to this so i can read it later.

    i'm down for a whole 6P setup at least. thanks man!
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  3. #3
    Flashaholic* datiLED's Avatar
    Join Date
    May 2006
    Location
    Atlanta, GA
    Posts
    1,914

    Default Re: Cerakote 1st Run Edited

    I'll be sending my Arc LS twisty tomorrow. I am leaning towards Zombie Green, but the OD Green is nice, too.

    EDIT: Bare Arc LS twisty mailed on 1/5.
    EDIT2: PayPal sent.

    All parts Zombie Green.
    Tailcap: $13
    Head: $17
    Shipping $5.15
    ---------------
    Total $35.15
    Last edited by datiLED; 01-17-2013 at 08:25 PM.
    Be still, and know that I am God; I will be exalted among the nations, I will be exalted in the earth!
    Psalms 46:10

  4. #4
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Cerakote 1st Run Edited

    No problem, I am getting something in Zombie Green and SOCOM or Ridgeway Blue, can't decide.
    Last edited by benthiccracker; 01-04-2013 at 04:13 PM.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  5. #5
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    I'm getting my stuff ready for you and just to be clear:
    (ridgeway blue for all parts)
    1x 6P body 65mm: $20
    1x Z44 sized bezel: $13
    1x Tailcap: $13
    TOTAL: $46 (shipping TBD)


    so I'll send you my stuff (minus lens, o-rings, switch assembly) in a Priority Mail flat rate box with a note saying each part is ridgeway blue, with a return label and necessary padding of course. send paypal later when you give the word.

    everything correct?
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  6. #6
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Cerakote 1st Run Edited

    perfect! you can send PayPal itemized notes as soon as you ship and know return shipping.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  7. #7
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by tobrien View Post
    I'm getting my stuff ready for you and just to be clear:
    (ridgeway blue for all parts)
    1x 6P body 65mm: $20
    1x Z44 sized bezel: $13
    1x Tailcap: $13
    TOTAL: $46 (shipping TBD)


    so I'll send you my stuff (minus lens, o-rings, switch assembly) in a Priority Mail flat rate box with a note saying each part is ridgeway blue, with a return label and necessary padding of course. send paypal later when you give the word.

    everything correct?
    Meant to quote this... perfect!
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  8. #8
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by benthiccracker View Post
    perfect! you can send PayPal itemized notes as soon as you ship and know return shipping.
    Quote Originally Posted by benthiccracker View Post
    Meant to quote this... perfect!
    gotcha, thanks! I'll try and get to the post office for a flat rate box either tomorrow or Monday and proceed to pay

    thank you for organizing this! i'd love to see how your SOCOM blue part(s) turn out. mind if I ask what you're getting done in SOCOM blue?
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  9. #9
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    same thing you are getting in ridgeway... thinking about doing my 9P and all my extensions too. Really big decision though cause if I leggo the parts with anything else they won't match anymore.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  10. #10
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by benthiccracker View Post
    same thing you are getting in ridgeway... thinking about doing my 9P and all my extensions too. Really big decision though cause if I leggo the parts with anything else they won't match anymore.
    gotcha bud! I definitely wanna see how your SOCOM blue turns out though. I was gonna do that but I was thinking it wouldn't be immediately noticeable, which is something I'd really like. I mean, if I started with a black light and it still looked black when I pick it up at the wrong angle for the light to hit it just right, I may as well still have a black light, you know?

    I'm boxing up my bored 6P, Z44, and Z41 now. I just removed all o-rings, the lens, bezel ring, switch module, etc.

    Thank you so much for this incredible undertaking!

    I'll include all my info in a printed document inside my priority box for you. I won't, however, be opting for insurance because you're just ~2 hours away from me lol. I understand the potential risk, though.

    Thanks man
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  11. #11
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Cerakote 1st Run Edited

    that is very true! I am mainly coating just because the lights I am getting done are users with the light wear attributed to that.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  12. #12
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Bump for talked to my Cerakote guy this morning. He is going to the Shotshow in Vegas Wednesday of next week. I will be aiming to get to his shop on Monday to prep parts for this run. If you want in, now is the time! He is ordering ZOMBIE GREEN and BURNT BRONZE today to pump up his supply of colors. I didn't have him get any Safety Orange because I didn't have anyone asking for it; however, it can be done on the next run. RIDGEWAY & SOCOM BLUE are on hand. In other news: datiLED I got the ARC out of the mailbox this morning!
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  13. #13
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    just mailed you my 6P stuff today with everything. do you want the tracking number in your PM inbox?
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  14. #14
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by tobrien View Post
    just mailed you my 6P stuff today with everything. do you want the tracking number in your PM inbox?
    That's fine.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  15. #15
    Flashaholic* las3r's Avatar
    Join Date
    Jan 2009
    Location
    ohio
    Posts
    626

    Default Re: Cerakote 1st Run Edited

    Last edited by las3r; 01-07-2013 at 12:00 PM.

  16. #16
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by las3r View Post
    Any info on larger parts ?
    Please let me know what. It would be great if you could get me a pic of what you want compared to a 6P or 9P, something I can get a comparison with. Also with each part separate in one pic would be fantastic.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  17. #17
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NY
    Posts
    844

    Default Re: Cerakote 1st Run Edited

    Hi benthiccracker, I'm planning to send in a Surefire A2 for coating. So far, I've found instructions to gut out the tailcap, but none so far regarding the head or body. Your instructions are very clear in the OP, but I just wanted to ask to see if there's still hope for my A2 to be coated, does the head absolutely need the lens removed? Can the lens and the bottom just be masked? Also the A2 body isn't a simple tube, but has I guess electronics. Can both ends of the body just be masked? I do apologize for my questions, I really don't know much about cerakoting items.

  18. #18
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by samuraishot View Post
    Hi benthiccracker, I'm planning to send in a Surefire A2 for coating. So far, I've found instructions to gut out the tailcap, but none so far regarding the head or body. Your instructions are very clear in the OP, but I just wanted to ask to see if there's still hope for my A2 to be coated, does the head absolutely need the lens removed? Can the lens and the bottom just be masked? Also the A2 body isn't a simple tube, but has I guess electronics. Can both ends of the body just be masked? I do apologize for my questions, I really don't know much about cerakoting items.
    I wish I could help you with the lens removal. I have the same problem with my E2D bezel. It will start to come unscrewed then stop. I even cracked the glass lense and marked the anno trying to get it off. Now I really need it off! I know they can be removed because some of the modded a on here have shown pics. I really wouldn't feel comfortable putting a part in the drying oven not gutted. Especially with any kind of electronics like resistors etc. Mabybe try one of the other threads for an answer. I was planning on it, I just haven't had a chance.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  19. #19
    Flashaholic* samuraishot's Avatar
    Join Date
    Jul 2009
    Location
    NY
    Posts
    844

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by benthiccracker View Post
    I wish I could help you with the lens removal. I have the same problem with my E2D bezel. It will start to come unscrewed then stop. I even cracked the glass lense and marked the anno trying to get it off. Now I really need it off! I know they can be removed because some of the modded a on here have shown pics. I really wouldn't feel comfortable putting a part in the drying oven not gutted. Especially with any kind of electronics like resistors etc. Mabybe try one of the other threads for an answer. I was planning on it, I just haven't had a chance.
    Oh I see, it has to go into a drying oven. Man! I want my Yellow/Green A2 in Zombie Green so bad! Well, I'm gonna keep searching for answers - hope is still not lost! Thanks for the response

  20. #20
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Cerakote 1st Run Edited

    I have pushed the date up for this first run. All parts must arrive to me by Saturday. I will do another run after this one is complete and I can post some pics. If you want your parts coated decide today! Priority mail will have them to me on time if they are shipped tomorrow.
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  21. #21
    Flashaholic* las3r's Avatar
    Join Date
    Jan 2009
    Location
    ohio
    Posts
    626

    Default Re: Cerakote 1st Run Edited


    Click here to see the pick of my light
    http://m553.photobucket.com/albumvie...c9fe7.jpg.html

  22. #22
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by las3r View Post

    Click here to see the pick of my light
    http://m553.photobucket.com/albumvie...c9fe7.jpg.html
    WOW! Sending PM
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  23. #23
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Buttrock Re: Cerakote 1st Run Edited

    I'm getting excited! I am ready! Am I doing a Mac? Yes! Am I doing a E1B? Yes! Am I doing a bunch of SF C bodies? Yes! Whats up with that Oveready 9P GITD and DB 1450 Slim? NOTHING! just eye candy... Although I may try to weedle the secret mixture of glow powder to bright white Cerakote out of Dan or Tom If you are sitting on the sidelines for this run, NO WORRIES MON! Just watch for the "after" pics and get ready for the next!
    I am thinking about all the SF C in Burnt Bronze, the E1B in SOCOM Blue, the Mac in ZOMBIE Green. What do y'all think?
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  24. #24
    Flashaholic* datiLED's Avatar
    Join Date
    May 2006
    Location
    Atlanta, GA
    Posts
    1,914

    Default Re: Cerakote 1st Run Edited

    I don't see my Arc LS in that picture.
    Be still, and know that I am God; I will be exalted among the nations, I will be exalted in the earth!
    Psalms 46:10

  25. #25
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by datiLED View Post
    I don't see my Arc LS in that picture.
    Bad buisness, although I did think about putting it in there! Here ya go! How about datiLED's ARC in ZOMBIE GREEN?

    IMG_0193 by benthiccrackerbrian, on Flickr
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  26. #26
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    i take it you received mine? i'm out of town and didn't write down the tracking number
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  27. #27
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by tobrien View Post
    i take it you received mine? i'm out of town and didn't write down the tracking number
    no not yet, kinda was wonderin what was going on...
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  28. #28
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Cerakote 1st Run Edited

    Quote Originally Posted by benthiccracker View Post
    no not yet, kinda was wonderin what was going on...
    i'll PM you
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  29. #29
    Flashaholic benthiccracker's Avatar
    Join Date
    Mar 2012
    Location
    United States
    Posts
    406

    Default Cerakote 1st Run Edited

    goin to work will reply tonight
    I want a torch to see Heaven 'cause I have doubts that's where I 'm going.
    Click to get CERAKOTE for your flashlights!

  30. #30
    Flashaholic*
    Join Date
    Oct 2009
    Location
    In the middle of Europe
    Posts
    1,228

    Default Re: Cerakote 1st Run Edited

    Since you are offering non military colors like pink my question is if you are also offering yellow (schoolbus or corvette)?
    Still looking for Surefire G2 in Orange.
    If you have one you don't like please PM me.

Page 1 of 10 12345678 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •