Electropneumatic:
Asahi Walther WA2000 DX; custom 6.03mm adjustable HopUp-equipped inner-barrel by Frontier Gun Shop, Sendai, Japan; 3-9x40mm SIIS target riflecscope; aftermarket 45-round high-capacity magazine
AEG:
TM H&K G3 SG/1 with DEN "AEG001 Moderate" (400 fps. with 0.20 gram BB's) upgrade set (c.1999), 6.04 mm tightbore stainless-steel inner-barrel, Classic Army G3 metal body (paintwork to S/E/F) and cocking tube kit, TM Quick-Release "Claw"-type see-through bridge scope-mount with BSA 3-9x 40mm riflescope (Butler Creek spring-release flip-up protective lens caps installed), BlackHawk height-adjustable tactical cheek pad with closed-cell foam and solid riser inserts, ICS three-point tactical sling mounted on Hush Stalker Delrin swivel, other misc. internal fixes and refurbishment as detailed in my
www.airsoftplayers.com "Gun Encyclopedia" entry on the SG/1 (
http://www.airsoftplayers.com/guninfo/sg1.asp )
TM H&K G3 MC51 with TM Quick-Release "Claw"-type see-through bridge scope-mount and Walther-Umarex-Maruzen reflex Competition Pointsight protected by small FreedomArt lens shield; FIRST Factory 18.0-19.0 lasersight H&K Side Mount Ring with Beamshot 1000 lasersight; Custom Scope Mounts 1" Weaver base ring securing SureFire G2 Nitrolon tactical light (with G&P remote presure tape tailcap) to FIRST Factory enlarged foregrip
9x G3 standard capacity mags + 2x high capacity mags + 1 15-BB capacity mag
TM KAC SR-16 with Trijicon Reflex II sight (protected by reverse-mounted medium FreedomArt lens protector), SureFire T100 tactical light, GB-Tech KAC M4 Q/D mock suppressor, ICS mock AN/PEQ-2 unit with MC74B lasersight and UN sticker set, Guarder 2-Piece SMG/Carbine convertible outer barrel
TM Colt M4A1 SMG (by AirsoftExtreme); G&P SureFire M500 (replica) tactical flashlight foregrip with 9.6V 1700 mAh U-shaped AA battery pack, KM "Phantom" flash-hider and 6.04mm tightbore TN inner-barrel (carbine-length cut), S3 RIS mount with modular detachable front sight post, Guarder carbine/SMG length 2-piece conversion barrel, C-More Tactical electronic red-dot sight with modified Butler Creek Blizzard see-through lens cap, modified SynergyShot laser sight module; VLTOR Carbine ModStock with butterfly latch.
15x standard capacity Colt mags + 1 high capacity
TM Steyr AUG SR with underslung SunProject M203; AirsoftExtreme "Extreme Durability Upgrade, Level 2" (with SYSTEMA M100 spring, metal bushings, standard-ratio flat gears aluminum piston, polycarb piston head with bearing, and spring guide rod with bearing), KM 6.04 mm tightbore TN full-length inner- barrel, 9.6V 1500 mAh custom battery pack, 2x 21-BB FIRST high-pressure 40mm shells, 3x 24 x6mm CAW/MM Hop-equipped 40mm MOSCART shells, 1x CAW/MM 165 x6mm "BB-Shower" 40mm MOSCART shell, Guarder/IS "Real-Rifle" bore 9-inch "SOCOM" metal M203 outer barrel, EOTech Model 450 HOLOsight (protected with modified FreedomArt lens protector) cantilevered over TASCO EXP 1.5-5x model (5" extended eye-relief model; protected with modified Just lens protector) using ARMS #37 30mm to 1-inch ring inserts, ARMS #22L Throw Lever Rings, plus ARMS #22 Tactical Rail Ring (TRR) and Tactical Rail Cap (TRC)
13x standard capacity AUG mags
Gas-Operated:
Tanio Koba Ruger 10/22 Type 111 (Hogue "Overmold" model), with matte silver Tasco AccuDot 30mm red-dot sight (GBB rifle), 1 extra mag
WA Cobray/Ingram M-11 SMG (FA/SA GBB SMG) with WA mock suppressor, front grip tab, and WA-reproduction c.1980's "US Secret Service -style" shoulder holster rig, including off-side triple pot mag pouch; 4x 50-rd. magazines
Tanaka Works S&W M29 Performance Center "Flat Side," silver
Marushin Industries 8-3/8 inch Taurus Raging Bull Model 444 (.44 Magnum) MAXI 8mm (with 18 Marushin .44 MAG 8mm brass shell cartridges), TASCO PDP5 4-reticle eRDS mounted using genuine Taurus trademarked Raging Bull 8-3/8 inch-type scope mount and Custom Scope Mounts' 30mm silver-finished Weaver rings
KWC Colt Python 6" .357 Magnum revolver (with 18 shells), full length B-Square scope mount rail, BSA 1" red-dot sight
Marushin Industries Derringer SSB, silver
Maruzen Remington M870 Grip Version pump-action shotgun with three-point sling; TacStar barrel heat shroud over cut-down barrel; extra gas resevoir cartridge
and
Maruzen Remington M1100 semi-automatic shotgun, black polymer version with KM/HEAD1950 buttstock-mounted 6-shell holder, modified TacStar 6-shell sidesaddle, Wilson Combat/Scatterguns Technologies Trak-Lock Tritium sights, and ITI M3 tactical light with long-gun pigtail pressure switch remote tape tailcap mounted via ITI M870/M1100 mount
Maruzen shotgun replicas share a KM/HEAD1950 sidesaddle shell catcher plus 35 green and 21 blue 10 BB capacity Maruzen shotshells
KJW H&K USP with metal slide, original plastic outer barrel, and Maruzen/Walther MT-01 tactical light mo9unted to relieved dustcover; 20/20 Concepts chemiluminescent "sight paint" -- 2 extra mags
KWC "High-Grade" M92FS "Super" HeavyWeight
Maruzen Walther PPK/S Custom (c. late 2001), one spare mag
Maruzen Walther P99, Version 2 ("Silenced Special" Limited Edition, with threaded barrel and mock suppressor), one spare mag
KSC Glock 18C (Airsoft Extreme MAX upgrade) machine pistol with Glock SafeAction tactical light unit, frame plug, 20/20 Concepts chemiluminescent "sight paint"; 5x standard capacity magazines with Pearce "Grip Enhancers"
KSC SIGARMS SigPro SP2009, one extra mag
- and -
KSC SIGARMS SigPro SP2340 Delta Trial Custom, Limited Edition
KSC M945 (black), genuine Japanese version with Taiwan-made metal outer barrel and slide set plus 2 extra mags
WA S&W .40 Shorty, silver, one extra mag
WA Beretta M92FS Perfect Version HeavyWeight, black, with genuine Beretta trademarked wrap-around, finger-grooved combat rubber one-piece grip panel (Hogue contract); two extra mags
- and -
WA Beretta M92FS Perfect Version Premium Edition "Black Polymar" 5th Anniversary Limited Edition; genuine Beretta Walnut grip panels with laser engraved trademark and laser carved checkering
WA Shibuya Shop Wilson Combat Tactical Response Custom (*CLONED* using WA Shibuya Shop Wilson Combat CDP High-Capacity model WA-SVN slide, Wilson Combat Service Grade CQB frame, WA High-Capacity Series CQB Special inner barrel assembly [Hop equipped] and "combat/factory-plus" slide lock lever, and WA-Wilson Combat black Zytel plastic grip panels with weight plates, Wilson Combat #188 magwell [fitted after custom relief of GBB frame, black]; hybrid JP BoMar-type rear sight base with WA BoMar rear sight leaf unit)
WA Hi-Cap. Series CQB Special, Sheriff extended slide lock/release lever (black, shaved and fitted), 20/20 Concepts chemiluminescent "sight paint," refinished matte black blanked G&G frame rail with ITI M3 supplement on Holsters+ Kydex carrier; two extra mags
WA Strayer-Voigt Infinity Series Championship .45 (WA-IFD) "house-tuned" BB-IPSC "Open Class" GBB Race-Pistol, JP/MJL Control Lever (black, custom shaved and fitted), Leupold Gilmore LG35 two-tone finish (silver turret, black housing) electronic red-dot sight (8MOA) -- currently awaiting modification
WA Strayer Voigt Infinity Series 6" Hybrid Comp (HB61414) and 5" Hybrid Comp (HB50630) Limited Edition, dueling set; WA "combat"-type BoMar rear sight blades, WA silver "combat/factory-plus" slide lock levers; spare Guarder/IS "Hybrid" faux cosmetic chambers
WA Shibuya Shop Custom CWM-model Colt Combat Defence Pistol, Sheriff extended slide lock/release lever (custom shaved and fitted, silver), true Wilson Combat magwell (fitted after custom relief of GBB frame, black)
WA Shibuya Shop Custom CWK-model Wilson Combat Striker, Wilson Combat Diamondwood grip panels relieved for weight plates, InsightTechnologies M6 tactical light & laser sight unit
All single-stacker WA .45's share 4x silver WA Wilson Combat extended baseplate magazines plus 2x Shibuya Shop silver and 9x standard black magazines with custom shaved, drilled, and fitted genuine Wilson Combat #47BN magazine base-plates cut to low-profile fit
2011-style .45 BB-IPSC "Limited Class" Race-Pistol:
WA Shibuya Shop Wilson Combat CDP High-Capacity model WA-SVN metal lower frame (silver), grip module, and non-Hop inner barrel assembly. PGC aluminum metal slide (silver, Wilson Combat "Classic") with Mk.II aluminum "SpeedBlock" blowback chamber. Smoking Hole Pistol Design "BlackHole" mag-well, fluted cut. Sheriff fluted "Bull" steel outer barrel (silver), "Barsto .45" steel chamber (silver) [joined by o-ring vibration damper], steel checkered large mainspring housing (silver; plus revised internals and up-rated mainspring) and floating valve. Guarder/IS 150% recoil spring and mainspring set (with hybridized G&G Adjustable Buffer System and Sheriff/TRW Shock Buff set), metal inner-barrel bushing replacement, reinforced inner barrel chamber clamp-set replacement, and 5" non-Hop 6.03mm tightbore 303-stainless-steel inner barrel. PGC hammer strut and extended/strengthened valve knocker ("firing pin"). GK reinforced Delrin nozzle. JP DoubleRing sights (custom WA Bomar rear base with JP rear ring and leaf unit, front ring highlighted with JP SightCoat). JP/MJL Control Lever, custom silver, shaved and fitted. Custom silver trigger, custom mainspring housing and mag-well retention pin.
Clarence Lai
www.AirsoftSurgeon.com "DumboRAT Special" BB-IPSC "Open Class" Race-Pistol:
WA Strayer Voigt Infinity 6" base with CL custom silver chassis and CL custom airsoft Acc-U-Rail, CL custom SV-type dark "red crack line" design black grip (custom high-ride) with solderjob and Smoking Hole Pistol Design trademark, dark red anodized SHPD "BlackHole" magwell with flute cuts, 7075 aluminum slide (sliver) with CL custom hexagonal cut and CL/Smoking Hole milling design, 2.5" 4 hole 2 jet CL custom hexagonal cut and milled 7075 aluminum compensator, steel "bull" outer barrel with CL custom hybrid porting, Sheriff steel chamber with CL custom matching hybrid detail lettering works, KM 6.04mm TN 178mm full-length inner barrel, CL custom SHPD "Matrix" design bearing external hammer, steel superextended firing pin, PGC reinforced loading nozzle with Sheriff floating/rocket valve, JP/MJL Control lever (custom silver high-polished, shaved and fitted), CL tuned 4/3 pound super light trigger pull, Sheriff steel beavertail grip safety with CL custom mirror polished finish, Sheriff steel ambidextrous thumb safety (wide) with CL high-polish silver finish, high-rate hammer spring and recoil spring, CL custom extended steel recoil spring guide rod hybridized with G&G Adjustable Buffer System and Sheriff/TRW Shock Buff set, CL custom redesigned extended SHPD 7075 aluminum magazine release button, 3.5 MOA DOCTER Optics DOCTERsight with CL AirsoftSurgeon LoMount base and Arredondo PowerPak
Pictures of CL custom GBB:
http://www.airsoftohio.com/phpBB/viewfile.php?CatID=1&FileCat=gallery&FileType=Image&FileSubCat=193
and
http://www.1086cn.com/ipsc/gallery/read.asp?id=30
Customized 1911-style double-stacker BB-IPSC GBB's share: 1 black Arredondo magazine base pad equipped and 4x silver WA double-stacker magazines each with Guarder/IS High-Performance/Output valve (custom silver-metallic WA SVI base-plates, modified for SHPD mag-well fit).
The Ultimate "Castor Troy" _Face/OFF_ Tribute Quad-Pistol Project
"The Twins" -- Dexter and Sinister by Clarence Lai/AirSoftSurgeon with Sid Ryan faux-ivory polymer plastic custom scrimshaw grip panels ("Tiger Descending Mountain" and "Oriental Dragon" motifs, respectively). Rankin Saddlery-Leatherworks (Savage, MT.) custom handcrafted mh-11 Spec-Ops Double Back-Draw holster, plain black leather
Western Arms Shibuya Custom Works SVI 1911-5.0 Single Column Pistol (SV-CWI variant
http://www.wa-gunnet.co.jp/custom/sv_cwi.html -- retained frame, ambidex wide safeties, beavertail grip safety, trigger assembly, and stock internals with exception of parts cited to follow), GRS side-polished dual-tone Springfield Armory, Springfield Custom slide, Sheriff "BARSTO .45" steel chamber (custom high-polished and rust-proofed), Guarder/IS "5-inch" length stainless steel bull/corn/cone outer barrel (chosen for the presence of its faux internal rifling, Guarder/IS 150% recoil spring, Guarder/IS reinforced inner-barrel bushing (part no. 205), PGC "Wilson Combat"-type bearing hammer with matching sear, PGC hammer strut, Sheriff silver-finished wide extended slide stop, Sheriff silver extended mag release lever, blued/black Sheriff mainspring housing (with custom higher-rate mainspring and mainspring spacer set-up -- custom surface high-polished dual-tone and rust-proofed), PGC extended firing pin, fit of the genuine Wilson Combat #188 extended mag well with relief of stock plastic frame, custom-cut CarbonCreations black-on-black smooth carbon-fiber grip panels; Mernickle Custom Holsters (Mission, BC, Canada) SH9 Dual-Gun Dual-Mag Carry System shoulder holster rig,
Mernickle Custom Holsters 2x Performance Series Concealed Carry PS23 High-Ride Double Magazine Pouches and 1-3/4 inch PB1 Double-Thickness Dress Belt -- all plain black leather
2x Uncle Mikes Quad Case single-stack 1911-.45 magazine pouches
All single-stacker WA .45's in _Face/Off_ Tribute Project share, as with above single-stackers, 4x silver WA Wilson Combat extended baseplate magazines plus 2x Shibuya Shop silver and 9x standard black magazines with custom shaved, drilled, and fitted genuine Wilson Combat #47BN magazine base-plates cut to low-profile fit
http://www.arniesairsoft.co.uk/beta/html/nukebrowser.php?filnavn=/projects/complete_castor_troy/complete_castor_troy.htm
/ubbthreads/images/graemlins/smile.gif
Allen
aka DumboRAT