Mattaus
Flashlight Enthusiast
PLEASE READ THIS ENTIRE THREAD CAREFULLY BEFORE SENDING ANY PAYMENT. THERE IS A LOT OF INFORMATION TO GO THROUGH!!!!!
Hi all,
Some of you may be aware of a very long and drawn out project I had running for the last 12 months. Sadly it got the better of me and was shelved. However I have decided that in an effort to recoup some of the money I "invested" ("wasted" according to my better half haha) I have for sale the following hand made drop-ins:
#1 Triple Nichia NVSL219AT-H1 @3A USD$135 SOLD to timsmile
#2 Triple Nichia NVSL219AT-H1 @3A USD$135 SOLD to dlmorgan999
#3 Triple Nichia NVSL219AT-H1 @3A USD$135 SOLD
#4 Triple Nichia NVSL219AT-H1 @3A USD$130 SOLD to JohnF (some minor scratches around the lens lip)
#5 Triple XP-G2 Neutral White R5 3C @3A USD$135 SOLD to bRIBEGuy
#6 Triple XP-G2 Neutral White R5 3C @3A USD$135 SOLD Silgt
#7 Triple XP-G2 Neutral White R5 3C @3AUSD$135 SOLD to tofty
#8 Triple XP-E2 Cool White R3 1D @3A USD$125 SOLD to PoliceScannerMan
#9 Single XM-L2 Cool White U2 1C @3A USD$115 SOLD Silgt
#10 Single XM-L2 Cool White U2 1C @3A USD$115 USD$105
#11 Single XM-L2 Neutral White T6 3A @3A USD$115 SOLD to Chodes
#12 Single XM-L2 Neutral White T6 3A @3A USD$115 SOLD to moshow9
#13 Single XM-L2 Neutral White T6 3A @3A USD$115 SOLD to dlmorgan999
#14 Single Nichia NVSL219AT-H1 @3A USD$105 SOLD to PoliceScannerMan
#15 Single Nichia NVSL219AT-H1 @3A USD$105 WITHDRAWN
#16 Single XP-G2 Neutral White R5 3C @3A USD$115 SOLD to moshow9
#17 Single XP-G2 Neutral White R5 3C @3A USD$115 SOLD top flat-ray
#18 Single XP-E2 Cool White R3 1D @2A USD$90 WITHDRAWN
All drop-ins use my custom made "Hyperion" firmware. This is a fully user configurable user interface that is useable straight out of the light - no external programmers necessary. A brief demo video of the firmware in action can be seen in the following video. I apologize for the poor quality and the average/poor presentation skills. I wish I had configured the memory type last because I had a scare halfway through that would have been avoidable without memory (lost my mind for a second):
The programming card is available here. Print this out and keep it until you know it off by heart
Some brief details:
################################################## ################################################## ################
I also have for sale the same silver plated P60 blanks used in the drop-ins above.
#19 Triple Copper Silver Plated P60 Blank USD$35 SOLD to Chodes
#20 Triple Copper Silver Plated P60 Blank USD$35 SOLD per PM
#21 Triple Copper Silver Plated P60 Blank USD$35 SOLD per PM
#22 Single Copper Silver Plated P60 Blank with reflector USD$35 SOLD to Chodes
#23 Single Copper Silver Plated P60 Blank with reflector USD$35 SOLD per PM
#24 Single Copper Silver Plated P60 Blank with reflector USD$35 SOLD to boznet
#25 Single Copper Silver Plated P60 Blank USD$35 SOLD to DIablo 331
#26 Single Copper Silver Plated P60 Blank USD$35 SOLD to DIablo 331
#27 Single Copper Silver Plated P60 Blank USD$35 SOLD to DIablo 331
#28 Single Copper Silver Plated P60 Blank USD$35USD$30 SOLD to Alje
#29 Single Copper Silver Plated P60 Blank USD$35USD$30SOLD to Alje
I have 3 reflectors I will include for free with the first 3 single drop-ins sold. If you purchase a blank single drop-in, the reflectors I used are available here. Basically anything those dimensions or smaller will fit.
************************************************** ************************************************** ************************************************** ************************************************** ****************
Shipping for everything in this thread is in addition to the prices quoted above and is via regular airmail (no tracking). Prices vary depending on your location:
North America: USD$15
Europe: USD$20
Asia: USD$12
Australia: AU/USD$7
Aussies please feel free to pay with either US or Australian dollars. It's up to you to work out which is cheaper on any given day. Stupid stock market :duh2:
I combine shipping, with the standard price remaining in effect until 5 drop-ins are reached per order. Any more than this will push me over the weight limit an require extra money to post.
If you would like registered/tracked/insured postage please PM me before sending any payment. As a general rule all postage rates are taken from here and rounded up to the nearest dollar.
I'll ship packages as soon as physically possible, however my working hours fall over the time our post office is open. If I can't sneak out at lunch during the week it may have to wait until the weekend, and the post office is only open for one 3 hour window from 9am to midday on Saturdays. Typical government facility!!!!
************************************************** ************************************************** ************************************************** ************************************************** ****************
The usual first "I'll take it", get priority. Please PM me before sending payment to confirm final pricing especially if you order extra optics, change your shipping requirements or want to bundle multiple items. I will provide PayPal details then.
PLEASE NOTE these drop-ins are not churned out of a factory by machines or Foxconn workers. Other than the CNC machining used to make the initial drop-in, everything else is done by hand. The drivers are built by hand, the LEDs are re-flowed by hand, everything soldered, epoxied and fixed in place by, you guessed it, hand As a result they are not perfect. Minor marks, dents and scratch are evident. I have done my best to clean them up where applicable, and if I feel the "issue" is severe enough I have marked and priced them accordingly above.
I am on a different time zone to 90% of you so please take this into consideration when waiting for responses to queries. I'm normally pretty good though
As always I am more than happy to discuss specifics in this thread, via PM or by regular email. This is my only run of these drop-ins for a very long time as I would like to focus my hobby time on complete lights and accessories that will blow people's minds :devil:
Thanks for looking!
- Matt
Hi all,
Some of you may be aware of a very long and drawn out project I had running for the last 12 months. Sadly it got the better of me and was shelved. However I have decided that in an effort to recoup some of the money I "invested" ("wasted" according to my better half haha) I have for sale the following hand made drop-ins:
#1 Triple Nichia NVSL219AT-H1 @3A USD$135 SOLD to timsmile
#2 Triple Nichia NVSL219AT-H1 @3A USD$135 SOLD to dlmorgan999
#3 Triple Nichia NVSL219AT-H1 @3A USD$135 SOLD
#4 Triple Nichia NVSL219AT-H1 @3A USD$130 SOLD to JohnF (some minor scratches around the lens lip)
#5 Triple XP-G2 Neutral White R5 3C @3A USD$135 SOLD to bRIBEGuy
#6 Triple XP-G2 Neutral White R5 3C @3A USD$135 SOLD Silgt
#7 Triple XP-G2 Neutral White R5 3C @3AUSD$135 SOLD to tofty
#8 Triple XP-E2 Cool White R3 1D @3A USD$125 SOLD to PoliceScannerMan
#9 Single XM-L2 Cool White U2 1C @3A USD$115 SOLD Silgt
#10 Single XM-L2 Cool White U2 1C @3A USD$115 USD$105
#11 Single XM-L2 Neutral White T6 3A @3A USD$115 SOLD to Chodes
#12 Single XM-L2 Neutral White T6 3A @3A USD$115 SOLD to moshow9
#13 Single XM-L2 Neutral White T6 3A @3A USD$115 SOLD to dlmorgan999
#14 Single Nichia NVSL219AT-H1 @3A USD$105 SOLD to PoliceScannerMan
#15 Single Nichia NVSL219AT-H1 @3A USD$105 WITHDRAWN
#16 Single XP-G2 Neutral White R5 3C @3A USD$115 SOLD to moshow9
#17 Single XP-G2 Neutral White R5 3C @3A USD$115 SOLD top flat-ray
#18 Single XP-E2 Cool White R3 1D @2A USD$90 WITHDRAWN
- All drop-ins are made from copper and have been professionally electroplated with a very thick layer of pure silver. All drop-ins use copper springs and arctic Alumina throughout.
- All single emitter drop-ins use noctigon MCPCBs.
- Triples use regular Aluminum MCPCBs. Please note at these drive levels in the triples there are no performance gains to be had from copper boards.
- All drop-ins are single cell lithium ion rechargeable compatible only.
- All prices include 1 optic of your choice. If you require additional optics the cost is USD$2 per optic.
- All optics and reflectors are removable.
All drop-ins use my custom made "Hyperion" firmware. This is a fully user configurable user interface that is useable straight out of the light - no external programmers necessary. A brief demo video of the firmware in action can be seen in the following video. I apologize for the poor quality and the average/poor presentation skills. I wish I had configured the memory type last because I had a scare halfway through that would have been avoidable without memory (lost my mind for a second):
The programming card is available here. Print this out and keep it until you know it off by heart
Some brief details:
- 2 fully configurable mode groups
- 1-7 modes per group
- 16 brightness levels with each level roughly double the visual brightness of the level before it except for the moonlight mode.
- Variable frequency police strobe, Beacon, and SOS configuration options
- Short cycle, classic, and no memory configuration options
- Battery level indicator
- Low voltage protection
- Thermal protection
- Reverse polarity protection
################################################## ################################################## ################
I also have for sale the same silver plated P60 blanks used in the drop-ins above.
- The triple drop-ins do not have a center hole. I can drill a center hole at no additional charge.
- The single drop-ins accept 16mm MCPCBs.
- All drop-ins have space for 17mm drivers in the rear.
- There is plenty of internal space to stack chips on the triple.
- The singles have no internal space for chip stacking (so if you want to stack chips it will have to take place externally)
#19 Triple Copper Silver Plated P60 Blank USD$35 SOLD to Chodes
#20 Triple Copper Silver Plated P60 Blank USD$35 SOLD per PM
#21 Triple Copper Silver Plated P60 Blank USD$35 SOLD per PM
#22 Single Copper Silver Plated P60 Blank with reflector USD$35 SOLD to Chodes
#23 Single Copper Silver Plated P60 Blank with reflector USD$35 SOLD per PM
#24 Single Copper Silver Plated P60 Blank with reflector USD$35 SOLD to boznet
#25 Single Copper Silver Plated P60 Blank USD$35 SOLD to DIablo 331
#26 Single Copper Silver Plated P60 Blank USD$35 SOLD to DIablo 331
#27 Single Copper Silver Plated P60 Blank USD$35 SOLD to DIablo 331
#28 Single Copper Silver Plated P60 Blank USD$35USD$30 SOLD to Alje
#29 Single Copper Silver Plated P60 Blank USD$35USD$30SOLD to Alje
I have 3 reflectors I will include for free with the first 3 single drop-ins sold. If you purchase a blank single drop-in, the reflectors I used are available here. Basically anything those dimensions or smaller will fit.
************************************************** ************************************************** ************************************************** ************************************************** ****************
Shipping for everything in this thread is in addition to the prices quoted above and is via regular airmail (no tracking). Prices vary depending on your location:
North America: USD$15
Europe: USD$20
Asia: USD$12
Australia: AU/USD$7
Aussies please feel free to pay with either US or Australian dollars. It's up to you to work out which is cheaper on any given day. Stupid stock market :duh2:
I combine shipping, with the standard price remaining in effect until 5 drop-ins are reached per order. Any more than this will push me over the weight limit an require extra money to post.
If you would like registered/tracked/insured postage please PM me before sending any payment. As a general rule all postage rates are taken from here and rounded up to the nearest dollar.
I'll ship packages as soon as physically possible, however my working hours fall over the time our post office is open. If I can't sneak out at lunch during the week it may have to wait until the weekend, and the post office is only open for one 3 hour window from 9am to midday on Saturdays. Typical government facility!!!!
************************************************** ************************************************** ************************************************** ************************************************** ****************
The usual first "I'll take it", get priority. Please PM me before sending payment to confirm final pricing especially if you order extra optics, change your shipping requirements or want to bundle multiple items. I will provide PayPal details then.
PLEASE NOTE these drop-ins are not churned out of a factory by machines or Foxconn workers. Other than the CNC machining used to make the initial drop-in, everything else is done by hand. The drivers are built by hand, the LEDs are re-flowed by hand, everything soldered, epoxied and fixed in place by, you guessed it, hand As a result they are not perfect. Minor marks, dents and scratch are evident. I have done my best to clean them up where applicable, and if I feel the "issue" is severe enough I have marked and priced them accordingly above.
I am on a different time zone to 90% of you so please take this into consideration when waiting for responses to queries. I'm normally pretty good though
As always I am more than happy to discuss specifics in this thread, via PM or by regular email. This is my only run of these drop-ins for a very long time as I would like to focus my hobby time on complete lights and accessories that will blow people's minds :devil:
Thanks for looking!
- Matt
Last edited: