Hi, I have bought from ebay 3 chip led 100w each, with the 3 primary colors (Red, Green and Blue) and I wanted to build a very powerful RGB LED floodlight!
Taking a look in the various ebay stores, I learned that these chips LEDs have different voltages based on the color and power, so they are not like the classic strips rgb led 12v
-
100W RED
-
100W GREEN
-
100W BLUE
And here's how you should present the voltages by color:
My questions I ask the more experienced are:
1. A controller RGB 12-24v and 18A do you think is enough? and can operate at 25-36v? What else do you suggest?
2. From the table above (if it is correct) it is clear that the work to a maximum of 25v Red, Green and Blue while the work to a maximum of 36v,
So if the controller rgb 12-24 also work in 36v've got to keep two to handle the different voltages between (Red) and (Green-Blue)
3. You know better solutions?
My project is the following:
Taking a look in the various ebay stores, I learned that these chips LEDs have different voltages based on the color and power, so they are not like the classic strips rgb led 12v
And here's how you should present the voltages by color:
My questions I ask the more experienced are:
1. A controller RGB 12-24v and 18A do you think is enough? and can operate at 25-36v? What else do you suggest?
2. From the table above (if it is correct) it is clear that the work to a maximum of 25v Red, Green and Blue while the work to a maximum of 36v,
So if the controller rgb 12-24 also work in 36v've got to keep two to handle the different voltages between (Red) and (Green-Blue)
3. You know better solutions?
My project is the following:
Last edited:
