• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

TK61vn V2 - Throw King +740K Lux ;-)

Status
Not open for further replies.

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
TK61vn V2

Must Read & Agree Before Purchase

















Big Upgrading questions
Question 1: If you got a V1 should you upgrade to V2?
Answer 1: IMO the performance increase is not enough to justify the money. But if you like the new UI, want the extra performance and money is not a big deal then sure why not. :)
Question 2: Should you buy a V1 or V2?
Answer 2: Let the UI be the first priority determining factor. :)

For me personally I am retiring my V1 :)

TK61vn V2 Specs and Details

- L1 = .200
- L2 = 1.550
- L3 = 3.600
- L4 = ~7-7.5A Depening on Cells


TK61vn V2 User Interface:


1) Starting from OFF: Each fast click = L1 Low -> L2 Medium -> L3 High -> L4 Turbo -> OFF

2) Starting from OFF: Press & Hold = Instant Momentary Turbo, let go to turn OFF

3) During ON at any mode: Press & Hold Greater Than 1 second = Momentary Turbo, let go to return to previous mode

4) During this operation 3 above: Light will flash into 1 lower mode for 1 second before going into momentary turbo if you are at ON, If you let go of the button during this one second you will remain at that lower mode. This allow you to ramp down brightness to a desire level or to OFF if you are at L1 Low.

5) During On at any mode: The fastest way I found to turn off the light is just fast click until the light gets to OFF

The UI above might sounds confusing but it's intuitive during practice. IMO, this UI serve this type of dedicated thrower well. You can always be sure a fast click from OFF gets you Low and a Long Press from off gets get Turbo.

* Lockout the light by loosening the head & tail cap when not in use, during storage or transportation.
* Quality Protected 18650 Only

Pricing:

A) Mod Stock TK61 to TK61 V2 PDT = $155
B) Mod TK61vn V1 to TK61vn V2 PDT = $100


TK61vn V2 Complete Light

C1) 6500K Dome On $285
C2) 6500K Dedome PDT $305


+ $5 for "V54" hand engraved on light
+ $25 for International Shipping
If You Want Shipping Insurance Please Ask

Paypal/Email: [email protected]

 
Last edited:

Bullyson

Enlightened
Joined
Sep 27, 2011
Messages
550
Location
South East Kentucky
Re: TK61vn V2

SHIPPED 1. Full Cream PDTc Engraved
SHIPPED 2. ErrolRS PDTc Engraved
SHIPPED 3. OAL PDTc +4O
SHIPPED 4. r1k1w1 PDTc Engraved
SHIPPED 5. Alex1234
6. Siriyot PDTc Engraved G25C2vn FL

SHIPPED 7. Slambert44438 PDTc Engraved #7

 
Last edited by a moderator:

a199578

Enlightened
Joined
May 9, 2014
Messages
206
Re: TK61vn V2

I like I like! I want I want! Can't wait to find out how much it will cost to upgrade the TK61vn to V2.
 

Saul Good

Enlightened
Joined
Dec 5, 2013
Messages
324
Re: TK61vn V2

That actually seems like a pretty cool interface (for me anyway...) since I usually either use the lowest mode or the highest the most. Exciting indeed!
 

ncvarmint

Newly Enlightened
Joined
Jan 13, 2012
Messages
149
Re: TK61vn V2

Sign me up
i want it too
cant wait to see what specs are too!
whoohoo
 

panag

Enlightened
Joined
Mar 26, 2014
Messages
357
Location
thasos greece
Re: TK61vn V2

I am very excited!!!!!!! waiting!!!!!!!!
TK61vn V2

Possibly 2000+ LED Lumen ;-)
Unprecedented 8A XML2 PDTc current draw for a VN Light
Ultra Thick Additional Copper Heat Sink
You can either start on the highest or the lowest mode with a single long or short press. :)
Both button does the same thing


Who is excited?! I am!
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
Re: TK61vn V2

Should i post my Tk61mk1 out to you now its wrapped and ready to post name the price & shes on her way back for some mk2 treats

Hang tight guys. Let me get all the V2 testing and specs up first. It might not be better a V1 replacement but just an alternative.
 
Status
Not open for further replies.
Top