Angryfox        
Page 170 of 170 FirstFirst ... 70120160163164165166167168169170
Results 5,071 to 5,086 of 5086

Thread: SkyRC — IFA 2014 — MC3000 charger-analyzer

  1. #5071

    Default Re: MC3000 vs C4

    Quote Originally Posted by fmc1 View Post
    Take a look at post #4767 in this thread. Getting the display out of the old case was the hardest part for me. I had to heat it up quite a bit.

    Frank
    Hi Frank...appreciate the help, I opened up my unit and it looks like there's no white glue holding in the display or other components, just screws, so I shouldn't have any problems...hopefully !!

    I did find this YouTube video helpful for reassembly...Thank you


    Last edited by Mp0w3r; 04-08-2018 at 09:10 AM.

  2. #5072
    Flashaholic
    Join Date
    Mar 2017
    Location
    Long Island NY
    Posts
    110

    Default Re: MC3000 vs C4

    Quote Originally Posted by Mp0w3r View Post
    Hi Frank...appreciate the help, I opened up my unit and it looks like there's no white glue holding in the display or other components, just screws, so I shouldn't have any problems...hopefully !!

    I did find this YouTube video helpful for reassembly...Thank you
    I thought the video was helpful. I actually received the replacement case prior to the video being posted but I did not swap it out until later. By that time I had already bought another post June 2016 unit, this time from a US seller with the upgraded case and I was using that one. I think it’s only the very early units that had no glue. On my post June 2016 unit the display, the display connectors, the button connectors and even the fan is glued in. Fortunately the glue falls apart with some heat. The screw posts on the new case were thicker than the old one so I had to open the holds up a little on the PCB.


    Good luck with the swap.


    Frank

  3. #5073

    Default Re: MC3000 vs C4

    Just out of interest, why did you need to open the case of a post June 2016 version?


    Quote Originally Posted by fmc1 View Post
    I thought the video was helpful. I actually received the replacement case prior to the video being posted but I did not swap it out until later. By that time I had already bought another post June 2016 unit, this time from a US seller with the upgraded case and I was using that one. I think it’s only the very early units that had no glue. On my post June 2016 unit the display, the display connectors, the button connectors and even the fan is glued in. Fortunately the glue falls apart with some heat. The screw posts on the new case were thicker than the old one so I had to open the holds up a little on the PCB.


    Good luck with the swap.


    Frank
    EagTac M25C2 Turbo_VN_XPG2-PDTc version; SureFire UB3T Invictus; Nitecore SRT7; TrustFire X6; LumaPower MVP (3xCree) , Sunwayman V11R; 4Sevens Quark AA Tactical; Nitecore DI (R2, GDP, Q5); LiteFlux LF2XT-R2;

  4. #5074
    Flashaholic
    Join Date
    Mar 2017
    Location
    Long Island NY
    Posts
    110

    Default Re: MC3000 vs C4

    Quote Originally Posted by 7histology View Post
    Just out of interest, why did you need to open the case of a post June 2016 version?
    I wanted to see the changes in the newer case.

  5. #5075

    Default Re: MC3000 vs C4

    Anyone know where to find a replacement fan?

    Will a 12v work or does it need to be 15v?

  6. #5076
    Unenlightened
    Join Date
    Apr 2018
    Posts
    1

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    IDEA:
    1. Rename CAPACITY: to CUT CAPAC:
    2. Organize the possibility of charging / discharging for Ni-Cd and Ni-MH
    asymmetrical current (see figure).
    Call this mode MODE: ASYMMET
    Change the intervals for C. RESTING and D.RESTING (0 ms - 10 s, with the smallest possible multiplicity for current stabilization)
    CYCLE COUNT: OFF
    CYCLE MODE: OFF
    TARGET VOLT: 1.65V (not to recharge)
    DELTA PEAK:? (while to leave, research is needed)
    D.REDUCE: -x.xx (Leave)
    CUT VOLT: 1.00 (Leave)
    Enter two parameters: C.TIME and D.TIME (0 ms - 10 s, with the minimum possible multiplicity for stabilizing the current)


    This mode will allow you to drive as a charge (with C.CURRENT * C.TIME > D.CURRENT * D.TIME)
    and discharge (at C.CURRENT * C.TME < D.CURRENT * D.TIME).


    P.S. How is it possible to get the v1.14 beta firmware for testing?

  7. #5077

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    What's happened to the squirrel?
    EagTac M25C2 Turbo_VN_XPG2-PDTc version; SureFire UB3T Invictus; Nitecore SRT7; TrustFire X6; LumaPower MVP (3xCree) , Sunwayman V11R; 4Sevens Quark AA Tactical; Nitecore DI (R2, GDP, Q5); LiteFlux LF2XT-R2;

  8. #5078
    Flashaholic*
    Join Date
    Sep 2007
    Location
    MA
    Posts
    2,932

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    Quote Originally Posted by 7histology View Post
    What's happened to the squirrel?
    Likely SkyRC decided they had invested enough into the development of this charger. So he could be hibernating for the winter, trying to crack a bigger nut, or as sometimes happens to squirrels ....

    OK you were probably not looking for speculation, sorry about that.

  9. #5079

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    Likely you are correct - too bad about that.





    Quote Originally Posted by StandardBattery View Post
    Likely SkyRC decided they had invested enough into the development of this charger. So he could be hibernating for the winter, trying to crack a bigger nut, or as sometimes happens to squirrels ....

    OK you were probably not looking for speculation, sorry about that.
    EagTac M25C2 Turbo_VN_XPG2-PDTc version; SureFire UB3T Invictus; Nitecore SRT7; TrustFire X6; LumaPower MVP (3xCree) , Sunwayman V11R; 4Sevens Quark AA Tactical; Nitecore DI (R2, GDP, Q5); LiteFlux LF2XT-R2;

  10. #5080
    Unenlightened
    Join Date
    Jan 2018
    Location
    Russia, St. Petersburg....
    Posts
    11

    Default Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer

    Quote Originally Posted by sbj View Post
    Where to get the FW1.14B ?
    Becouse I have LTO CELLs (https://m.youtube.com/watch?v=xcpS4PQfWQs) and cells need charge and ......
    And tooday I use manual (visual) charge control (end voltage = 2.8V) in LiFePo4 profile.
    Last edited by inetchik; 05-06-2018 at 03:37 AM.

  11. #5081

    Default Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer

    Quote Originally Posted by inetchik View Post
    Where to get the FW1.14B ?
    Becouse I have LTO CELLs .
    I have Beta 1.14. hasnt been released yet because has few other bugs as listed in de list. Hybernating sounds about correct. I'll wake up after Wimbledon 2018

    Feel free to contact skyrc and ask, they might give beta to you since you really have \need lto.

    Congrats to owning lto. They are very hard to obtain.
    ~ bitterness about poor quality remains long after sweetness of low price is forgotten ~

  12. #5082

    Default Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer

    You're back!!!?



    Quote Originally Posted by kreisl View Post
    I have Beta 1.14. hasnt been released yet because has few other bugs as listed in de list. Hybernating sounds about correct. I'll wake up after Wimbledon 2018

    Feel free to contact skyrc and ask, they might give beta to you since you really have \need lto.

    Congrats to owning lto. They are very hard to obtain.
    EagTac M25C2 Turbo_VN_XPG2-PDTc version; SureFire UB3T Invictus; Nitecore SRT7; TrustFire X6; LumaPower MVP (3xCree) , Sunwayman V11R; 4Sevens Quark AA Tactical; Nitecore DI (R2, GDP, Q5); LiteFlux LF2XT-R2;

  13. #5083
    Unenlightened
    Join Date
    Jan 2018
    Location
    Russia, St. Petersburg....
    Posts
    11

    Default Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer

    Hello, kreisl.
    Quote Originally Posted by kreisl View Post
    I have Beta 1.14.....
    Thanks for replying to PM.

    I wrote a question, with link for video, on skyrc support.
    I got a response from them: " ..... on testing LTO firmware...."
    Much water has flowed since that time and there is no changes (no progress).


    Maybe you give me FW with bugs for testing too ?
    Or, I'll wait for the end of Wimbledon 2018.

    LTO cells to buy easily: aliexpress (https://ru.aliexpress.com/af/%25D1%2582%25D0%25B8%25D1%2582%25D0%25B0%25D0%25BD %25D0%25B0%25D1%2582%25D0%25B0-lto.html?SearchText=титаната+lto&blanktest=0&initi ative_id=RS_20180507045220&origin=n&jump=afs), or ebay, or .... . I bought on taobao.

    BR,
    Last edited by inetchik; 05-07-2018 at 06:01 AM.

  14. #5084
    Unenlightened
    Join Date
    May 2018
    Posts
    1

    Post Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    Hi there,

    I'm new to charging 18650 and I wanted to start the right way.
    I began in March to learn how to handle 18650.
    After I read all the positive things about the MC3000 I bought one in the same Month and a second one last week.
    As the original Software is not that perfect and in most discussions Data Explorer is recommended I would like to try that Software.
    But unfortunately I don't find my right way into this program, except for the handbook. But I didn't find anything that explaines the handling like installing or how it is possible to start the charging process with DEX.

    So can someone give me a hint how to use DEX with:
    1. More then one Instance on a PC for at least two MC3000 connected, additionally an Imax B6 mini....
    or
    2a. how to install it on a raspberry
    2b. how to use it there for at least two chargers ( so again 2 instances )
    Else I'm really lost with this software.

    Thanks in advance


    cadric

  15. #5085

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    Is there a SKYRC MC3000 thread or link to vetted programs for various batteries types/capacities?

  16. #5086

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    ........
    Last edited by klrman; 05-19-2018 at 01:09 AM.

Page 170 of 170 FirstFirst ... 70120160163164165166167168169170

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •