Olight - R50        
Page 170 of 170 FirstFirst ... 70120160163164165166167168169170
Results 5,071 to 5,077 of 5077

Thread: SkyRC — IFA 2014 — MC3000 charger-analyzer

  1. #5071

    Default Re: MC3000 vs C4

    Quote Originally Posted by fmc1 View Post
    Take a look at post #4767 in this thread. Getting the display out of the old case was the hardest part for me. I had to heat it up quite a bit.

    Frank
    Hi Frank...appreciate the help, I opened up my unit and it looks like there's no white glue holding in the display or other components, just screws, so I shouldn't have any problems...hopefully !!

    I did find this YouTube video helpful for reassembly...Thank you


    Last edited by Mp0w3r; 04-08-2018 at 09:10 AM.

  2. #5072
    Flashaholic
    Join Date
    Mar 2017
    Location
    Long Island NY
    Posts
    106

    Default Re: MC3000 vs C4

    Quote Originally Posted by Mp0w3r View Post
    Hi Frank...appreciate the help, I opened up my unit and it looks like there's no white glue holding in the display or other components, just screws, so I shouldn't have any problems...hopefully !!

    I did find this YouTube video helpful for reassembly...Thank you
    I thought the video was helpful. I actually received the replacement case prior to the video being posted but I did not swap it out until later. By that time I had already bought another post June 2016 unit, this time from a US seller with the upgraded case and I was using that one. I think it’s only the very early units that had no glue. On my post June 2016 unit the display, the display connectors, the button connectors and even the fan is glued in. Fortunately the glue falls apart with some heat. The screw posts on the new case were thicker than the old one so I had to open the holds up a little on the PCB.


    Good luck with the swap.


    Frank

  3. #5073

    Default Re: MC3000 vs C4

    Just out of interest, why did you need to open the case of a post June 2016 version?


    Quote Originally Posted by fmc1 View Post
    I thought the video was helpful. I actually received the replacement case prior to the video being posted but I did not swap it out until later. By that time I had already bought another post June 2016 unit, this time from a US seller with the upgraded case and I was using that one. I think it’s only the very early units that had no glue. On my post June 2016 unit the display, the display connectors, the button connectors and even the fan is glued in. Fortunately the glue falls apart with some heat. The screw posts on the new case were thicker than the old one so I had to open the holds up a little on the PCB.


    Good luck with the swap.


    Frank
    EagTac M25C2 Turbo_VN_XPG2-PDTc version; SureFire UB3T Invictus; Nitecore SRT7; TrustFire X6; LumaPower MVP (3xCree) , Sunwayman V11R; 4Sevens Quark AA Tactical; Nitecore DI (R2, GDP, Q5); LiteFlux LF2XT-R2;

  4. #5074
    Flashaholic
    Join Date
    Mar 2017
    Location
    Long Island NY
    Posts
    106

    Default Re: MC3000 vs C4

    Quote Originally Posted by 7histology View Post
    Just out of interest, why did you need to open the case of a post June 2016 version?
    I wanted to see the changes in the newer case.

  5. #5075

    Default Re: MC3000 vs C4

    Anyone know where to find a replacement fan?

    Will a 12v work or does it need to be 15v?

  6. #5076
    Unenlightened
    Join Date
    Apr 2018
    Posts
    1

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    IDEA:
    1. Rename CAPACITY: to CUT CAPAC:
    2. Organize the possibility of charging / discharging for Ni-Cd and Ni-MH
    asymmetrical current (see figure).
    Call this mode MODE: ASYMMET
    Change the intervals for C. RESTING and D.RESTING (0 ms - 10 s, with the smallest possible multiplicity for current stabilization)
    CYCLE COUNT: OFF
    CYCLE MODE: OFF
    TARGET VOLT: 1.65V (not to recharge)
    DELTA PEAK:? (while to leave, research is needed)
    D.REDUCE: -x.xx (Leave)
    CUT VOLT: 1.00 (Leave)
    Enter two parameters: C.TIME and D.TIME (0 ms - 10 s, with the minimum possible multiplicity for stabilizing the current)


    This mode will allow you to drive as a charge (with C.CURRENT * C.TIME > D.CURRENT * D.TIME)
    and discharge (at C.CURRENT * C.TME < D.CURRENT * D.TIME).


    P.S. How is it possible to get the v1.14 beta firmware for testing?

  7. #5077

    Default Re: SkyRC — IFA 2014 — MC3000 charger-analyzer

    What's happened to the squirrel?
    EagTac M25C2 Turbo_VN_XPG2-PDTc version; SureFire UB3T Invictus; Nitecore SRT7; TrustFire X6; LumaPower MVP (3xCree) , Sunwayman V11R; 4Sevens Quark AA Tactical; Nitecore DI (R2, GDP, Q5); LiteFlux LF2XT-R2;

Page 170 of 170 FirstFirst ... 70120160163164165166167168169170

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •