• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

SOLD TK61vn V4

Status
Not open for further replies.

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
TK61vn V4
Must Read & Agree Before Purchase


Photos in post 2


TK61vn V4.0 User Interface:


1) Starting from OFF: Each fast click = L1 Low -> L2 Medium -> L3 High -> L4 Turbo -> OFF

2) Starting from OFF: Press & Hold = Instant Turbo, Turbo will stay on, fast click to turn off

3) During ON at any mode: Press & Hold to bring back one level, quick click to forward a level

* Lockout the light by loosening the head or tail cap when not in use, during storage or transportation. Turn light on and loosen until light turn off.
* Quality Protected 18650s Only. DO NOT run unprotected cells.


TK61vn V4 XML2 PDTc $330
TK61vn54 XHP50 Dedome $265

+ $10 for Dark Heat Treated Bezel
+ $5 for "V54" hand engraved on light
+ $25 for International Shipping
If You Want Shipping Insurance Please Ask

Paypal/Email: [email protected]





Credit:
Special Thanks to Richard at mtnelectronics
 
Last edited:

Bigwilly

Flashlight Enthusiast
Joined
Jun 14, 2014
Messages
1,111
Re: TK61vn V3




TK61 Factory VS TK61vnV4 VS TK61vn50



TK61vn50 is very very impressive!

XHP50 can't be dedome the conventional way so I slice off the dome with a very sharp razor and round the edges. Resulting in perfect retention of the white tint and impressive throw. With further careful beam tuning the donut hole is reduced down to a tiny dark sport which is nothing to worry about outdoor! Lots of detailed work but I love the results!

 
Last edited by a moderator:

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
Re: TK61vn V3

Tortured tested the greatly updated driver set up and it's working great! :)

Hang tight for more details.
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
Re: TK61vn V3

Vinh I'm so happy !!!!

I can see your taking no chances now !! :)

Taking no chances!

As a matter of fact I am going to run the same torture test with every V3 that ships out.

The V3 will take even longer to build than the V2 due to added complexity and new additional driver heat sinking but it will be worth it! Pushing the limit is no joke!

The V3 will be more efficient on batteries too so that's a big plus!
 

ruke

Enlightened
Joined
May 15, 2014
Messages
323
Location
Southen California
Re: TK61vn V3

just checked my paypal, I don't see the refund... so if you haven't process it, just hang on to the $$$ and let me know the difference, I'm in for the V3
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
Re: TK61vn V3

just checked my paypal, I don't see the refund... so if you haven't process it, just hang on to the $$$ and let me know the difference, I'm in for the V3


Refund have already been made. It's just in pending status. I will send you an email.
 

tyxxvxl

Flashlight Enthusiast
Joined
Jun 26, 2014
Messages
2,926
Location
S.L.C. UT.
Re: TK61vn V3

Hell yea!
Sometimes it takes problems to get the best results :)
+1000 for sticking with it man!
 

Alex1234

Flashlight Enthusiast
Joined
Jan 23, 2010
Messages
4,003
Location
Bear Delaware
Re: TK61vn V3

Taking no chances!

As a matter of fact I am going to run the same torture test with every V3 that ships out.

The V3 will take even longer to build than the V2 due to added complexity and new additional driver heat sinking but it will be worth it! Pushing the limit is no joke!

The V3 will be more efficient on batteries too so that's a big plus!

is it a totally different driver ?
 

Skylumen

Newly Enlightened
Joined
Sep 14, 2010
Messages
0
Re: TK61vn V3

I have already refunded all New V2s complete light orders. If you are interested in the V3 you may also buy one at V2 prices. V3 prices for new buyers will be confirmed later as it will be a bit more.
 
Status
Not open for further replies.
Top