New ARC-maniac

Status
Not open for further replies.

Wisti

Newly Enlightened
Joined
Dec 16, 2003
Messages
199
Location
Fuerstenthum Lippe / Germany
Hello friends,Hi Peter!
I am mailing from Germany and my english is not good enough
to tell you how confident I am with my new ARC LSHF-P!
It is the brightest and whitest flashlight I have ever seen.
It is even brighter than my Mag-4D.
The brightness still increases after I unscrew the tailswitch and screw it back .
Are there any ways to keep the switch permenantly in perfect contact ?
 

this_is_nascar

Flashaholic
Joined
Mar 29, 2002
Messages
8,330
Location
Gloucester, New Jersey
I'm assuming you have the 1x123 TSP (clicky) tailswitch. You may want to check the spring or something. Unscrew the Kroll switch, inspect, clean if needed and screw back on. You shouldn't be experiencing a difference in output in screwing/unscrewing that switch.
 

Wisti

Newly Enlightened
Joined
Dec 16, 2003
Messages
199
Location
Fuerstenthum Lippe / Germany
I´m sorry .
I believe my light just switched into moon mode when I unscrewed the tailswitch , which I didn´t suppose because I was sure not to have used it for more than one hour and the moon mode is not that dim as exspected .
Thanks for Your hints !
Frank
 

Wisti

Newly Enlightened
Joined
Dec 16, 2003
Messages
199
Location
Fuerstenthum Lippe / Germany
Peter

After replacing the battery it works as excellent as before.
It was my mistake because I did not recognize the moon-mode.
Supposed it to be much dimmer .
May be the cr123 recharged a little bit every time I unscrewed the switch and screwed it back .
Thanks for your post.
Frank
 
Status
Not open for further replies.

Latest posts

Top