Acebeam        
Results 1 to 2 of 2

Thread: L1 bored to 18mm

  1. #1

    Default L1 bored to 18mm

    I just received my L1 back from Barry today. I had damaged the driver when I tried removing it from the body. I really liked the compact body, aggressive knurling and UI of the L1 so I sent it to Barry to have it bored out to 18mm. I can now run primaries and a variety of rechargeables through it along with many head options. I am now running a Malkoff M61 219 in a VME Head wth 2 primaries in a Delrin sleeve. I also added a 2 way clip and attached a combat ring (rubber oring) to the lanyard ring. This is now my new and favorite primary EDC. Thanks Barry. Awesome job.

    [IMG][/IMG]

  2. #2
    *Flashaholic* precisionworks's Avatar
    Join Date
    Apr 2007
    Location
    Benton Illinois
    Posts
    6,603

    Default Re: L1 bored to 18mm

    Thank you for your kind words Flashlight Nut. The L body & E body lights make a fantastic platform for custom builds.

    PLEASE NOTE: Boring the L-series lights is from head to tail & the larger bore (.728"-.729") must stop just short of the tail O-ring groove (.730"). This often means choosing a short 18650, one measuring about 65mm & using a flat top cell ... button tops are 1mm longer and may not work in every light.

    Also, early L-series lights (GEN1/GEN2/GEN3) may not be long enough to bore for 18650. Gen 4 & Gen 5 lights work 100% of the time.


    Last edited by precisionworks; 11-23-2014 at 10:06 AM.
    Surefire® boring including E-Series & Weapon Lights* Please text msg, phone or email through contact page at www:Precision.Works

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •