NITECORE -- Keep Innovating        
Page 1 of 39 1234567811 ... LastLast
Results 1 to 30 of 1160

Thread: Sinner Customs - Tri-EDC's and more - this run CLOSED

  1. #1
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Sinner Customs - Tri-EDC's and more - this run CLOSED

    01/19 - Books are closed.
    -------

    Specs of Sinner Tri-EDC:
    - Titanium 18350 Body
    - Nichia 219c Light Engine (950lm)
    - Carclo 10507 Clear, Narrow Optics
    - AR Coated Sapphire Crystal Lens
    - Max Lumens A17DD-S08 FET Driver
    - Copper Noctigon MCPCB
    - Crenellated Head w Engraved Logo.
    - Titanium Pocket Clip
    - Sky-Blue Fluorosilicone O-Ring
    - 16mm Recessed Rubber Boot
    - Weight 95g / 110g
    - Dimensions (Dia. 1" x L 3.2")


    Price: $375.00
    Click here for a Build Request
    Turnaround time: x Weeks


    Email:


    READY TO SHIP:
    Lights end up in this list if someone backs off of their order.
    - there are no ready to ship lights at this time please check back later -

    FAQ:
    Recommended Batteries are High Discharge Flat Top (IMR) 18350's:
    Brands: AW , Efest, Aspire - Please avoid purchasing off-brand and untested batteries.

    Alloys & Materials.
    Copper: 99.9% Pure , Oxygen free.
    Brass: Cu/Zn 67/33
    Titanium: Grade 2 Commercially Pure 99.2% Unalloyed.

    Standard Components:
    O-Rings:
    Head: #018 Sky-blue FVMQ Fluorosilicone
    Head: 19*2mm (ID x CS) Red ShA 70 PVMQ
    Body: 19*1.5mm (ID x CS) ShA 70 PVMQ

    Emitters:
    Pre-2015: XP-G2 NW, Nichia 219b 4750k NW HCRI 92+, XP-L V6-2A
    2015-16: Nichia 219c NW 5000K , Nichia 219b 4750K NW HCRI 92+, XP-L HI V3-2B NW 5000-5500K, XP-L HI V2-1A 6500K CW
    2017-: Nichia 219c 5000K 83CRI+ , Nichia 219c 5000K 90CRI+, XP-L HI V3-2B NW 5000K

    Driver Info:
    Sinner A17DD-S08 S-FET 4-mode w/Turbo 30s

    Optics:
    Carclo 10507 Rev.3
    20.00mm 2mm Uncoated Mineral Glass Lens
    AR Coated Sapphire Crystal 2mm
    Silicone Rubber Boot 16mm (16*7.5mm) - Silicone , Black.

    Thanks.
    Last edited by sinner-cpf; 10-12-2017 at 12:19 AM.

  2. #2
    *Flashaholic* gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    7,907

    Default Re: Sinner Customs - Tri-EDC's and more.

    Nice hosts.

    ImageUploadedByCandlepowerforums1425166541.113826.jpg


    Sent from my iPhone using Candlepowerforums

  3. #3
    Flashaholic*
    Join Date
    May 2009
    Location
    Canada
    Posts
    1,389

    Default Re: Sinner Customs - Tri-EDC's and more.

    These look really slick. Any chance you would drill for a pocket clip? How would a McG clip look on them? Tough to gauge size. Diameter and lengths?

    eala

  4. #4
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Re: Sinner Customs - Tri-EDC's and more.

    they come pre-drilled. tapped M2.5x0.45 , 110mm and 80mm in length. Aluminium being the lightest and brass being the heaviest, will update the requested info asap. Thanks.
    Last edited by sinner-cpf; 07-27-2015 at 01:42 AM.

  5. #5
    Flashaholic* KDM's Avatar
    Join Date
    May 2012
    Location
    Tennessee
    Posts
    2,007

    Default Re: Sinner Customs - Tri-EDC's and more.

    Quote Originally Posted by eala View Post
    These look really slick. Any chance you would drill for a pocket clip? How would a McG clip look on them? Tough to gauge size. Diameter and lengths?

    eala
    Here mine beside my Mac's Ti Tri EDC for size comparison.

    http://www.candlepowerforums.com/vb/...=1#post4598702

  6. #6

    Default Re: Sinner Customs - Tri-EDC's and more.

    Just received mine, it's extremely nice...Only wish the stepped-down high mode was directly accessible...
    Other than that, it exudes quality!!!

  7. #7
    Flashaholic cubebike's Avatar
    Join Date
    Oct 2011
    Location
    HK
    Posts
    332

    Default Re: Sinner Customs - Tri-EDC's and more.

    Very tempting. Wanna to confirm the price with host (Ti, Brass and Copper) and LE would be $95+$95? How much would be international shipping. Do you have pic of the Ti clip ?

  8. #8
    Flashaholic
    Join Date
    Apr 2013
    Location
    Northern California
    Posts
    321

    Default Re: Sinner Customs - Tri-EDC's and more.

    I'd also like to vouch for the quality. I've had one of the 18350’s in Cu with the triple XPL dedome and FET driver for a few weeks now, and it's a beautiful thing! Excellent build quality and an absolute ton of light from such a compact package.
    Sinner, I'll be placing an order for one in Ti with a triple XP-G2 neutral as soon as you can cut Trit slots. Any ETA on that?


    Sent from my iPad using Candlepowerforums

  9. #9
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Re: Sinner Customs - Tri-EDC's and more.

    Shipping is $16.50 to most countries. DHL (3-4 days) flat $20.00 worldwide.
    Updated the OP to reflect shipping costs.

    P.S: Prices updated

    Quote Originally Posted by justanotherguy View Post
    Just received mine, it's extremely nice...Only wish the stepped-down high mode was directly accessible...
    Other than that, it exudes quality!!!
    Thanks for the feedback.
    Last edited by sinner-cpf; 03-01-2015 at 02:36 PM.

  10. #10

    Default Re: Sinner Customs - Tri-EDC's and more.

    Sinner-

    Beautiful work!
    I will be placing a formal order with you in the coming weeks . I will keep you posted.

  11. #11
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Re: Sinner Customs - Tri-EDC's and more.

    Thanks RUSH

  12. #12

    Default Re: Sinner Customs - Tri-EDC's and more.

    after lots of pocket / use time, my Cu Tri getting an awesome feel too it. the grooves on the body section are narrow enough to not get the patina that the rest of the body gets, and sets it off nicely.


  13. #13
    Flashaholic djj's Avatar
    Join Date
    Dec 2007
    Location
    East MA
    Posts
    100

    Default Re: Sinner Customs - Tri-EDC's and more.

    What are the drive currents for the 2 available drivers?

  14. #14
    Flashaholic
    Join Date
    Apr 2013
    Location
    Northern California
    Posts
    321

    Default Sinner Customs - Tri-EDC's and more.

    Alright, Sinner. I'm not going to wait for the Trit slots... I'm going to order one in Ti now, while you have stuff in stock. Email and PP incoming. I'll order one with Trits when you can do them!


    Sent from my iPad using Candlepowerforums
    Last edited by th8tredude; 03-02-2015 at 11:31 PM.

  15. #15
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Re: Sinner Customs - Tri-EDC's and more.

    Thanks @th8redude
    Last edited by sinner-cpf; 10-10-2015 at 01:19 PM.

  16. #16

    Default Re: Sinner Customs - Tri-EDC's and more.

    Any ability to do a forward clicky with these hosts?

  17. #17
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Re: Sinner Customs - Tri-EDC's and more.

    @whiz: Not currently.

  18. #18

    Default Re: Sinner Customs - Tri-EDC's and more.

    PM sent.
    Pietro


  19. #19
    Flashaholic* Crazyeddiethefirst's Avatar
    Join Date
    Mar 2012
    Location
    Southern California
    Posts
    1,846

    Default Re: Sinner Customs - Tri-EDC's and more.

    I have a Titanium 18650 (Host only) with Titanium clip. Excellent build quality and I have emailed twice with questions regarding things I am working on(new LE/LED/reflector), and each time I have received a quick and courteous response. I highly recommend Sinner for excellent work and good customer service.


    Sent from my iPhone using Candlepowerforums

  20. #20
    Flashaholic* gktii's Avatar
    Join Date
    Jan 2014
    Location
    Chesapeake, VA
    Posts
    580

    Default Re: Sinner Customs - Tri-EDC's and more.

    just placed an order for one of these Cu bad boys...Can't wait to see the design and usability. and to see this tiny little light, put out 2k lumens...should be rather impressive....i'll keep everyone in the loop as i get it...
    i welcome the dark

  21. #21
    Flashaholic* DBCstm's Avatar
    Join Date
    May 2009
    Location
    Heart of Texas
    Posts
    1,488

    Default Re: Sinner Customs - Tri-EDC's and more.

    Hey Sinner, I got my little Ti Tri-EDC 18350 and it's a beaut! Going for a bit more run time, I loaded it up with 3 XP-G2's with a mixed tint for a pure white output. I used a 1A, 2B and 3C and it works beautifully! Pulling 5.73A at the tail from the Purple Efest 18350. Niiiice! This equates to a little over 1500 lumens in my light box, with a moon mode of 0.41 lumens. But I can't leave well enough alone, as you probably know by now, so I customized it's appearance on the outside to go with all the goodies on the inside....



    Very very happy with this latest addition to my growing Sinner collection. A Sinner for every occasion, that's my goal.

    Thank YOU!

  22. #22

    Default Re: Sinner Customs - Tri-EDC's and more.

    Gorgeous. Nice work

  23. #23

    Default Re: Sinner Customs - Tri-EDC's and more.

    What's OTF on the XPL dedomed?

  24. #24
    Flashaholic* gktii's Avatar
    Join Date
    Jan 2014
    Location
    Chesapeake, VA
    Posts
    580

    Default Re: Sinner Customs - Tri-EDC's and more.

    wow!!! that looks amazing!
    i welcome the dark

  25. #25
    Flashaholic
    Join Date
    Apr 2014
    Location
    Dubai, UAE.
    Posts
    183

    Default Re: Sinner Customs - Tri-EDC's and more.

    Depending on the driver used the current is divided equally between the three emitters, with the Nanjg-105c 3.0a Driver they will produce 1100+ OTF whereas with a FET Driver, they pull a whole lot of amps on the turbo and high modes, Max i've seen OTF are 3126Lm, 10A+ from a Efest 18350 on a 3-XPL/FET combo.

    Quote Originally Posted by oneinthaair View Post
    What's OTF on the XPL dedomed?

  26. #26
    Flashaholic* gktii's Avatar
    Join Date
    Jan 2014
    Location
    Chesapeake, VA
    Posts
    580

    Default Re: Sinner Customs - Tri-EDC's and more.

    Quote Originally Posted by sinner-cpf View Post
    with a FET Driver, they pull a whole lot of amps on the turbo and high modes, Max i've seen OTF are 3126Lm, 10A+ from a Efest 18350 on a 3-XPL/FET combo.
    this is what i'm looking for.. ;-)
    i welcome the dark

  27. #27

    Default Re: Sinner Customs - Tri-EDC's and more.

    Quote Originally Posted by gktii View Post
    this is what i'm looking for.. ;-)
    +1 on that!!

  28. #28

    Default Re: Sinner Customs - Tri-EDC's and more.

    These look great! can I see a pic of the Pill?
    Do they use a custom one? or a P60 base?
    Thanks, H.

  29. #29
    Flashaholic* Alex1234's Avatar
    Join Date
    Jan 2010
    Location
    Bear Delaware
    Posts
    3,724

    Default Re: Sinner Customs - Tri-EDC's and more.

    Iv always wanted a Sinner Host and the one i got does not disappoint. Vinh got one of the ti hosts from another member and turned it into this. The quality of the machining is quite amazing. You do amazing work and cant wait to get another one. Im hooked
    Last edited by Alex1234; 03-22-2015 at 11:05 AM.
    Flashlights: X65vn,Tn42vn, Boss1vn, X6vn SSCU, X5 kronos, U21vn, m43vn, FD41vn, SDminivn, H20vn, E01vn, Catapult v5, Bkfa09s, XT15, S10R Baton III, 55w hid spotlight 1,100,000cd



  30. #30

    Default Re: Sinner Customs - Tri-EDC's and more.

    Quote Originally Posted by DragonHead View Post
    These look great! can I see a pic of the Pill?
    Do they use a custom one? or a P60 base?
    Thanks, H.
    It's custom, and It's about the same as a mac's edc pill, but it's different threading.

Page 1 of 39 1234567811 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •