driver for cree xhp70

marc.collin · Apr 2, 2015

hi

what led driver for Cree XHP70 led

Typical Forward Voltage
5.8 V White @ 2100 mA (6 V)
11.6 V White @ 1050 mA (12 V)

Maximum Drive Current
4.8 A (6 V)
2.4 A (12 V)

Will use it with 4 18650 battery in serie.

thanks

m.pille.led · May 18, 2015

Hi
I am looking also for a good driver for the xhp50/70
Kaidomain offers drivers for both leds, for 1 or 3leds in series..... And 1,3 or 5modes , wich kost about 20$
They work with 4-18v, so it schould be quite a good driver!
Here's a single mode 1 xhp70 driver
http://www.kaidomain.com/product/details.S024015

I hope i've been helpfull

Now, I am looking for a driver that makes the same, but is smaller. I'm building a dive torch and there is almost no space for a big driver
Can anyone help me out whit this??

Best regards
M

Slotguy · May 19, 2015

This may work for you. It will put 5 amps into an XHP-70 with two Cells. http://www.mtnelectronics.com/index.php?route=product/product&path=67&product_id=214

driver for cree xhp70

marc.collin

Newly Enlightened

m.pille.led

Newly Enlightened

Slotguy

Newly Enlightened

Similar threads

Latest posts