Sold/Expired Custom 1.25D XHP-70 Maglite - No Longer Available

Custom 1.25D XHP-70 Maglite

Custom cut and tri-bored Maglite. This Maglite hosts a 12V XHP-70 on a custom fitted aluminum slug heatsink. The LED is powered by a custom programed FET driver, and uses 3x high drain IMR 17670 cells in series in a FM battery carrier (included). Also has a multi-coated ultra-clear lens, and a C12476_MIRELLA-50-S reflector. Light and modes function perfect, and has a BEAUTIFUL neutral tint. I would estimate around 4000 lumens, mostly flood. Such a nice piece! I would put host condition around 90%, there are some marks on the knurling from being in the lathe chuck.

Free standard shipping. Priority/Insured please add $8. CONUS Only!

List Date: 6/1/2015

For more info, click here to view the original listing: Custom 1.25D XHP-70 Maglite
--------------------------------------
This item is no longer available.


--------------------------------------

Re: Custom 1.25D XHP-70 Maglite

This is very nice! Heck of a price too. GLWS.

Re: Custom 1.25D XHP-70 Maglite

PM sent with some questions - nice light!

Re: Custom 1.25D XHP-70 Maglite

For those interested, the light comes with 3x IMR cells, and the driver information is as follows:

Universal guppydrv Clicky Firmware Option
This firmware allows the ultimate in user customizability, with 24 built-in mode groups, that the user can select via a series of button presses and a user programmable turbo timer that will automatically step the power down to 50% after the set time is hit (see below for instructions).

Rev.1 User Selectable Groups:

1. 1% - 25% - 100% | Memory
2. 1% - 25% - 100% | No Memory
3. 100% - 25% - 1% | No Memory
4. 1% - 25% - 100% - Strobe | No Memory
5. 1% - 25% - 100% - Strobe | Memory
6. 10% - 100% | Memory
7. 10% - 100% | No Memory
8. 100% - 10% | No Memory
9. 100%
10. 100% - Strobe | No Memory
11. Strobe - 100% | No Memory
12. ML - 2% - 25% - 100% | Memory
13. ML - 2% - 25% - 100% - Strobe - Beacon | No Memory
14. ML - 100% | No Memory
15. 100% - ML | No Memory
16. ML - 100% | Memory
17. ML - 1% - 5% - 15% - 40% - 100% | Memory
18. ML - 1% - 5% - 15% - 40% - 100% | No Memory
19. 100% - 40% - 15% - 5% - 1% - ML | No Memory
20. 100% - 40% - 15% - 5% - 1% - ML | Memory
21. 1% - 5% - 15% - 40% - 100% | Memory
22. 1% - 5% - 15% - 40% - 100% | No Memory
23. 100% - 40% - 15% - 5% - 1% | No Memory
24. 100% - 40% - 15% - 5% - 1% | Memory

Guppydrv ​Instructions
To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.

Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.

To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.

To lock the mode groups: Solder Star 2 to ground. The other stars have no function with this firmware.