• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Lumapower STRIVE-ECO supports 3xAA and 26650

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
The new member of STRIVE series now ready to ship :

The STRIVE-ECO not only support 3xAA (NiMH, Alkaline) but also high capacity 26650 (upto 73mm in length)

STRIVE-ECO01.jpg


STRIVE-ECO02.jpg


STRIVE-ECO03.jpg


STRIVE-ECO04.jpg


STRIVE-ECO05.jpg


STRIVE-ECO06.jpg


The battery tube of STRIVE-ECO :
3xAA holder included.

ECO_01.jpg


[FONT=&quot]SideKick UI 3.1 output control[/FONT]
[FONT=&quot]CLICK : power ON/OFF (click means press and release)[/FONT]
[FONT=&quot]HOLD (ON): change level (hold means press for more than 1 second)[/FONT]
[FONT=&quot]- [/FONT][FONT=&quot]While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.[/FONT][FONT=&quot][/FONT]
[FONT=&quot]HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.[/FONT]
[FONT=&quot]Mode A: 100%, 50%, 25%,10%, 1%[/FONT]
[FONT=&quot]Mode B: 14Hz Strobe, SOS, 0.5Hz Light House[/FONT][FONT=&quot][/FONT]
[FONT=&quot]MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)
[/FONT]
  • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)

  • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.

When battery is disconnect from circuit, the SideKick switch will not power up the light.
And the memory will restore to default setting : Ultra (100% output)

Battery level Indication and protection.
The SideKick switch with 2 pilot led to indicates the battery level. It will shows the battery level once every 60 seconds during power ON.

  1. GREEN : Full power, 3.6V or above
  2. GREEN blink : battery voltage lower than 3.6V
  3. RED blink : battery voltage lower than 3V, and the output will auto switch to 10%
When battery voltage drops to 2.8V, the protection will starts and turn the light OFF.

Retail price : USD85.
The order link will be posted by next week

CPFer can get the special offer : USD68.
Order now with your CPFid will receive a FREE diffuser kit.
Before the order link launch, you can also send PayPal to [email protected]

Best regards,

Ricky - Lumapower CS
 
Last edited:

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
For CPFer, you can order the Neutral White at the same price.

Best regards,

Ricky - Lumapower CS
 

lightmyfire13

Enlightened
Joined
Jul 27, 2012
Messages
413
The new member of STRIVE series now ready to ship :

The STRIVE-ECO not only support 3xAA (NiMH, Alkaline) but also high capacity 26650 (upto 73mm in length)

STRIVE-ECO01.jpg


STRIVE-ECO02.jpg


STRIVE-ECO03.jpg


STRIVE-ECO04.jpg


STRIVE-ECO05.jpg


STRIVE-ECO06.jpg


The battery tube of STRIVE-ECO :
3xAA holder included.

ECO_01.jpg


[FONT=&quot]SideKick UI 3.1 output control[/FONT]
[FONT=&quot]CLICK : power ON/OFF (click means press and release)[/FONT]
[FONT=&quot]HOLD (ON): change level (hold means press for more than 1 second)[/FONT]
[FONT=&quot]- [/FONT][FONT=&quot]While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.[/FONT][FONT=&quot][/FONT]
[FONT=&quot]HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.[/FONT]
[FONT=&quot]Mode A: 100%, 50%, 25%,10%, 1%[/FONT]
[FONT=&quot]Mode B: 14Hz Strobe, SOS, 0.5Hz Light House[/FONT][FONT=&quot][/FONT]
[FONT=&quot]MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)
[/FONT]
  • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)

  • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.

When battery is disconnect from circuit, the SideKick switch will not power up the light.
And the memory will restore to default setting : Ultra (100% output)

Battery level Indication and protection.
The SideKick switch with 2 pilot led to indicates the battery level. It will shows the battery level once every 60 seconds during power ON.

  1. GREEN : Full power, 3.6V or above
  2. GREEN blink : battery voltage lower than 3.6V
  3. RED blink : battery voltage lower than 3V, and the output will auto switch to 10%
When battery voltage drops to 2.8V, the protection will starts and turn the light OFF.

Retail price : USD85.
The order link will be posted by next week

CPFer can get the special offer : USD68.
Order now with your CPFid will receive a FREE diffuser kit.
Before the order link launch, you can also send PayPal to [email protected]

Best regards,

Ricky - Lumapower CS
Hi Ricky payment sent for strive NW 26650 forgot to add my cpf name light my fire 13 = xxxxxxxxx
 
Last edited:

LessDark

Enlightened
Joined
Dec 7, 2013
Messages
278
Location
Norway
So I can't buy the new battery tube and use it for my old Strive? Is the battery tube sold separatley? I can't find it on your page.
 

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
So I can't buy the new battery tube and use it for my old Strive? Is the battery tube sold separatley? I can't find it on your page.


Hi LessDark,

The upgrade parts in another thread : [CLICK HERE]

Before we have finish online shop's update, here is the price info. for STRIVE's upgrade parts :

1. Color Filter : RED @ USD12
2. Color Filter : GREEN @ USD12
3. Color Filter : BLUE @ USD12
4. Diffuser Tip @ USD5
5. 3xAA battery tube (also support 26650) @ USD25
6. Tele-Force reflector Kit @ USD25

CPFer discount :
1. Color Filter : RED @ USD10
2. Color Filter : GREEN @ USD10
3. Color Filter : BLUE @ USD10
4. Diffuser Tip @ USD4
5. 3xAA battery tube (also support 26650) @ USD20
6. Tele-Force reflector Kit @ USD20
You can send PayPal to [email protected] to place the order


Shipping Fee :
- Normal Airmail : USD3.
- Registered Airmail : USD5.
- Any order value over USD20, get free shipping.


Best regards,

Ricky - Lumapower CS
 

lightmyfire13

Enlightened
Joined
Jul 27, 2012
Messages
413
5 days from HK to UK exellent the Strive isn't bad either ...not too keen on the diffuser though ....makes a horrible yellowish colour of a nice neutral beam
 

SubLGT

Flashlight Enthusiast
Joined
Nov 18, 2013
Messages
1,183
Location
Idaho, USA
A nice upgrade from the previous version of the Strive I own. The UI is a big improvement. And the ability to use a 73mm long protected 26650 battery is appreciated.

Does it have reverse polarity protection?

When will it be available in the USA, from batteryjunction.com?
 
Last edited:

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
Hi SubLGT,

While with single switch design, both terminals for battery with spring to ensure constant contact.
So, no polarity protection.

We have forward the product details to batteryjunction and they will prepare the web info. and then bring it to market soon.

Best regards,

Ricky - Lumapower CS
 
Last edited:

SubLGT

Flashlight Enthusiast
Joined
Nov 18, 2013
Messages
1,183
Location
Idaho, USA
Hi Ricky

Since the Strive-Eco has a larger internal body diameter than the original Strive (26650 version), will a thin battery sleeve be included with the Strive-Eco, so that a 26650 battery will not "rattle" from side to side. Or will spring pressure be enough to prevent rattling?

P.S. I think making this flashlight compatible with AA batteries is an excellent idea.
 

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
Hi SubLGT,

The new battery tube with 2 internal diameter, the upper part close to the LED engine with a smaller diameter just fit the 26650.
So that the battery is stable located inside the battery tube.

Best regards,

Ricky - Lumapower CS
 

SubLGT

Flashlight Enthusiast
Joined
Nov 18, 2013
Messages
1,183
Location
Idaho, USA

HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.

Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON…..

Hi Ricky, will Memory work with strobe?
 

rickylumapower

Newly Enlightened
Joined
Jun 3, 2015
Messages
17
The STROBE mode is hidden from normal cycling.
The normal output of STRIVE-ECO in mode A cycle from different brightness.

Best regards,

Ricky - Lumapower
 

rickylumapower

Newly Enlightened
Joined
Jun 3, 2015
Messages
17
Hi tcglog,

The max. output over 800 lumens, and runtime depends on the battery capacity.
26650 with 4500Mah can offers more than 2 hours on max. output.
You can visit www.Lumapower.com to place your order.

Best regards,

Ricky - Lumapower
 
Top