EAGTAC        
Results 1 to 20 of 20

Thread: Lumapower STRIVE-ECO supports 3xAA and 26650

  1. #1

    Wink2 Lumapower STRIVE-ECO supports 3xAA and 26650

    The new member of STRIVE series now ready to ship :

    The STRIVE-ECO not only support 3xAA (NiMH, Alkaline) but also high capacity 26650 (upto 73mm in length)













    The battery tube of STRIVE-ECO :
    3xAA holder included.



    SideKick UI 3.1 output control
    CLICK : power ON/OFF (click means press and release)
    HOLD (ON): change level (hold means press for more than 1 second)
    - While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
    CLICK : power ON/OFF (click means press and release)
    HOLD (ON): change level (hold means press for more than 1 second)

    • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.

    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
    CLICK : power ON/OFF (click means press and release)
    HOLD (ON): change level (hold means press for more than 1 second)

    • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.

    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.

    When battery is disconnect from circuit, the SideKick switch will not power up the light.
    And the memory will restore to default setting : Ultra (100% output)

    Battery level Indication and protection.
    The SideKick switch with 2 pilot led to indicates the battery level. It will shows the battery level once every 60 seconds during power ON.

    1. GREEN : Full power, 3.6V or above
    2. GREEN blink : battery voltage lower than 3.6V
    3. RED blink : battery voltage lower than 3V, and the output will auto switch to 10%

    When battery voltage drops to 2.8V, the protection will starts and turn the light OFF.

    Retail price : USD85.
    The order link will be posted by next week

    CPFer can get the special offer : USD68.
    Order now with your CPFid will receive a FREE diffuser kit.
    Before the order link launch, you can also send PayPal to sales@lumapower.com

    Best regards,

    Ricky - Lumapower CS
    Last edited by lumapower; 07-05-2015 at 02:31 PM.
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  2. #2

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Hi is the AA battery holder included in this price. ..cheers

  3. #3

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Quote Originally Posted by lightmyfire13 View Post
    Hi is the AA battery holder included in this price. ..cheers
    Yes, and you can use Alkaline or NiMH. Best regards, Ricky - Lumapower CS
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  4. #4

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Should I add extra for neutral white $2 I think...cheers

  5. #5

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    For CPFer, you can order the Neutral White at the same price.

    Best regards,

    Ricky - Lumapower CS
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  6. #6

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Cheers n thanks

  7. #7

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Quote Originally Posted by lumapower View Post
    The new member of STRIVE series now ready to ship :

    The STRIVE-ECO not only support 3xAA (NiMH, Alkaline) but also high capacity 26650 (upto 73mm in length)













    The battery tube of STRIVE-ECO :
    3xAA holder included.



    SideKick UI 3.1 output control
    CLICK : power ON/OFF (click means press and release)
    HOLD (ON): change level (hold means press for more than 1 second)
    - While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
    CLICK : power ON/OFF (click means press and release)
    HOLD (ON): change level (hold means press for more than 1 second)

    • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.

    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
    CLICK : power ON/OFF (click means press and release)
    HOLD (ON): change level (hold means press for more than 1 second)

    • While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.

    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.
    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.

    When battery is disconnect from circuit, the SideKick switch will not power up the light.
    And the memory will restore to default setting : Ultra (100% output)

    Battery level Indication and protection.
    The SideKick switch with 2 pilot led to indicates the battery level. It will shows the battery level once every 60 seconds during power ON.

    1. GREEN : Full power, 3.6V or above
    2. GREEN blink : battery voltage lower than 3.6V
    3. RED blink : battery voltage lower than 3V, and the output will auto switch to 10%

    When battery voltage drops to 2.8V, the protection will starts and turn the light OFF.

    Retail price : USD85.
    The order link will be posted by next week

    CPFer can get the special offer : USD68.
    Order now with your CPFid will receive a FREE diffuser kit.
    Before the order link launch, you can also send PayPal to sales@lumapower.com

    Best regards,

    Ricky - Lumapower CS
    Hi Ricky payment sent for strive NW 26650 forgot to add my cpf name light my fire 13 = xxxxxxxxx
    Last edited by lightmyfire13; 07-06-2015 at 05:00 AM.

  8. #8
    Flashaholic LessDark's Avatar
    Join Date
    Dec 2013
    Location
    Norway
    Posts
    275

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    So I can't buy the new battery tube and use it for my old Strive? Is the battery tube sold separatley? I can't find it on your page.
    Warm white.

  9. #9

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Quote Originally Posted by LessDark View Post
    So I can't buy the new battery tube and use it for my old Strive? Is the battery tube sold separatley? I can't find it on your page.

    Hi LessDark,

    The upgrade parts in another thread : [CLICK HERE]

    Before we have finish online shop's update, here is the price info. for STRIVE's upgrade parts :

    1. Color Filter : RED @ USD12
    2. Color Filter : GREEN @ USD12
    3. Color Filter : BLUE @ USD12
    4. Diffuser Tip @ USD5
    5. 3xAA battery tube (also support 26650) @ USD25
    6. Tele-Force reflector Kit @ USD25

    CPFer discount :
    1. Color Filter : RED @ USD10
    2. Color Filter : GREEN @ USD10
    3. Color Filter : BLUE @ USD10
    4. Diffuser Tip @ USD4
    5. 3xAA battery tube (also support 26650) @ USD20
    6. Tele-Force reflector Kit @ USD20
    You can send PayPal to sales@lumapower.com to place the order


    Shipping Fee :
    - Normal Airmail : USD3.
    - Registered Airmail : USD5.
    - Any order value over USD20, get free shipping.


    Best regards,

    Ricky - Lumapower CS
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  10. #10

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    5 days from HK to UK exellent the Strive isn't bad either ...not too keen on the diffuser though ....makes a horrible yellowish colour of a nice neutral beam

  11. #11
    Flashaholic*
    Join Date
    Nov 2013
    Location
    Idaho, USA
    Posts
    1,008

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    A nice upgrade from the previous version of the Strive I own. The UI is a big improvement. And the ability to use a 73mm long protected 26650 battery is appreciated.

    Does it have reverse polarity protection?

    When will it be available in the USA, from batteryjunction.com?
    Last edited by SubLGT; 07-26-2015 at 10:02 AM.

  12. #12

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Hi SubLGT,

    While with single switch design, both terminals for battery with spring to ensure constant contact.
    So, no polarity protection.

    We have forward the product details to batteryjunction and they will prepare the web info. and then bring it to market soon.

    Best regards,

    Ricky - Lumapower CS
    Last edited by lumapower; 07-26-2015 at 12:29 PM.
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  13. #13
    Flashaholic*
    Join Date
    Nov 2013
    Location
    Idaho, USA
    Posts
    1,008

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Hi Ricky

    Since the Strive-Eco has a larger internal body diameter than the original Strive (26650 version), will a thin battery sleeve be included with the Strive-Eco, so that a 26650 battery will not "rattle" from side to side. Or will spring pressure be enough to prevent rattling?

    P.S. I think making this flashlight compatible with AA batteries is an excellent idea.

  14. #14

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Hi SubLGT,

    The new battery tube with 2 internal diameter, the upper part close to the LED engine with a smaller diameter just fit the 26650.
    So that the battery is stable located inside the battery tube.

    Best regards,

    Ricky - Lumapower CS
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  15. #15
    Flashaholic*
    Join Date
    Nov 2013
    Location
    Idaho, USA
    Posts
    1,008

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Quote Originally Posted by lumapower View Post

    HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.

    Mode A: 100%, 50%, 25%,10%, 1%
    Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
    MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON…..
    Hi Ricky, will Memory work with strobe?

  16. #16

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Quote Originally Posted by SubLGT View Post
    Hi Ricky, will Memory work with strobe?

    Hi SubLGT,

    Yes, it works for any selected ouput including STROBE.

    Best regards,

    Ricky - Lumapower CS
    welcome to www.lumapower.com
    We do accept Paypal : sales@lumapower.com

  17. #17
    Flashaholic Raybo's Avatar
    Join Date
    Apr 2004
    Location
    Illinois
    Posts
    469

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    I don't need no stinkin' strobe!

    Looks like I will pass on this light.....

  18. #18

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    The STROBE mode is hidden from normal cycling.
    The normal output of STRIVE-ECO in mode A cycle from different brightness.

    Best regards,

    Ricky - Lumapower

  19. #19

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    How many lumens max and for how long? How do I order?

  20. #20

    Default Re: Lumapower STRIVE-ECO supports 3xAA and 26650

    Hi tcglog,

    The max. output over 800 lumens, and runtime depends on the battery capacity.
    26650 with 4500Mah can offers more than 2 hours on max. output.
    You can visit www.Lumapower.com to place your order.

    Best regards,

    Ricky - Lumapower

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •