Endeavour
Flashlight Enthusiast
Hello Everyone,
This thread is for the sales and discussion of the Aeon Mk. III, along with its associated accessories.
The Aeon Mk. III is a small, bright, long running torch designed to provide very nicely rendered light output off of a CR2 cell, in a very high-quality, no-compromises package.
It is available in a few different forms: 6AL4V Titanium, 7075-T6 Aluminum (lightweight alloy with the strength of steel), Polished Copper, Timascus, and Mokume Gane.
It is 17.5 x 63mm long (0.689 x 2.48 inches), comes equipped with a click tailswitch, a secure, double-locking clip, and a double-AR coated sapphire lens (aluminum models have an ultra clear double-AR borosilicate glass lens).
I went through a substantial amount of effort with this light to design something small, simple, and elegant, with performance to match, and you'll find the beam bright, its shape pleasing, and its color neutral and of high quality, without the starkness frequently seem in non-High CRI LEDs.
A summary of the torch's features:
High-CRI Nichia 219 LED
1/25/180 Lumens Output
Trapezoidal Threads
Custom Light Orange Peel Parabolic Reflector
Microprocessor Controlled Light Engine
Gold Plated Electrical Contacts
O-Ring Sealed, Water Resistant
Clicky Pushbutton Tailcap
Stainless Steel Pocket Clip
CR2 Based
17.5mm Diameter, 63mm Length
It is available on the website for purchase in all versions (timascus and mokume are expected to complete production around the end of April), with pricing starting at $295.
I have also collaborated with the Ashland Leather Co. out of Chicago to bring you some high quality sheaths made from Genuine Horween Leather. These are hand stitched and designed to fit your Aeon snugly, protecting your light with no small amount of class.
Leather conditioner for the sheaths and all your leather products (shoes, bags, etc.) is also available here.
When I set out to make this version of the Aeon I wanted to elevate the product from what was already a good and well reputed design with the Mk. I and Mk. II, to a higher level. In terms of quality, fit and finish, and overall performance, I think this has been well-achieved in the Aeon Mk. III, and I look forward to seeing how you use the light yourself once you have it in hand!
If you have any questions, please feel free to post here, or e-mail [email protected].
Thanks!
Enrique
This thread is for the sales and discussion of the Aeon Mk. III, along with its associated accessories.
The Aeon Mk. III is a small, bright, long running torch designed to provide very nicely rendered light output off of a CR2 cell, in a very high-quality, no-compromises package.
It is available in a few different forms: 6AL4V Titanium, 7075-T6 Aluminum (lightweight alloy with the strength of steel), Polished Copper, Timascus, and Mokume Gane.
It is 17.5 x 63mm long (0.689 x 2.48 inches), comes equipped with a click tailswitch, a secure, double-locking clip, and a double-AR coated sapphire lens (aluminum models have an ultra clear double-AR borosilicate glass lens).
I went through a substantial amount of effort with this light to design something small, simple, and elegant, with performance to match, and you'll find the beam bright, its shape pleasing, and its color neutral and of high quality, without the starkness frequently seem in non-High CRI LEDs.
A summary of the torch's features:
High-CRI Nichia 219 LED
1/25/180 Lumens Output
Trapezoidal Threads
Custom Light Orange Peel Parabolic Reflector
Microprocessor Controlled Light Engine
Gold Plated Electrical Contacts
O-Ring Sealed, Water Resistant
Clicky Pushbutton Tailcap
Stainless Steel Pocket Clip
CR2 Based
17.5mm Diameter, 63mm Length
It is available on the website for purchase in all versions (timascus and mokume are expected to complete production around the end of April), with pricing starting at $295.
I have also collaborated with the Ashland Leather Co. out of Chicago to bring you some high quality sheaths made from Genuine Horween Leather. These are hand stitched and designed to fit your Aeon snugly, protecting your light with no small amount of class.
Leather conditioner for the sheaths and all your leather products (shoes, bags, etc.) is also available here.
When I set out to make this version of the Aeon I wanted to elevate the product from what was already a good and well reputed design with the Mk. I and Mk. II, to a higher level. In terms of quality, fit and finish, and overall performance, I think this has been well-achieved in the Aeon Mk. III, and I look forward to seeing how you use the light yourself once you have it in hand!
If you have any questions, please feel free to post here, or e-mail [email protected].
Thanks!
Enrique
Last edited: