• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Triple Conversion pills for Mac's EDC series, and standard Tri pills for Mac's ++

mcbrat

Flashlight Enthusiast
Joined
Jan 28, 2013
Messages
3,971
Location
Iowa
AVAILABLE: Tri-EDC pills

ALL SOLD Copper Triple Conversion pill for Mac's EDC lights.
has been test fit into an early Aluminum SST-50 EDC using 16340 and into a newer Cu XM-L EDC using 18350 and it worked in both. If you have one of the first run SST-50 lights with the shorter head, the pill needs shortened to work...


AVAILABLE Copper Standard triple pill (Fits Mac's Tri-EDC and a couple other makers triples: Okluma TinyDC/DC1, JHanko Twisted Trident with standard threading, Deadwood Customs, etc...)



C145 Tellurium Copper
Done on CNC lathe
tapped for 4-40 screws for ground wire if needed

CuTe Std pill = 27.79g
Conversion CuTe pill = 52.74g
stock Al pill = 8.57g

Offered as bare pills only.

cu-pills.jpg


This is my test engine (not for sale)
cu-pill-2.jpg


...and installed.
triple-conversion.jpg


Pricing (each plus shipping)
Cu Triple Conversion pill $44.00
Cu Std. Triple pill $41.00
Stock Aluminum Triple pill $25.00

USA Shipping $7.00
International Shipping $12.00

(Example: 1 of each shipped to US would be $41 + $44 + $7 = $92)

Names pre-reserved from previous interests thread from Mac's forum...
Post your "I'll take it" or "remove me from the list" notes below, and PM me for paypal address.

Aluminum stock bare pill (used) (Fit's Mac's Tri-EDC and a couple others)
1. SOYCD (paid) (shipped)
2. SOYCD (paid) (shipped)


Cu Triple Conversion pill for Mac's SST-50 EDC lights and XM-L EDC lights
1. mcbrat (paid) (.)
2. mcbrat (paid) (.)
3. KDM (paid) (shipped)
4. bubble (paid) (shipped)
5. Dirty Wage Guy (paid) (shipped)
6. Dirty Wage Guy (paid) (shipped)
7. Dirty Wage Guy (paid) (shipped)
8. Zoran (paid) (shipped)
9. Skandocious (paid) (shipped)
10. write2dgray (paid) (shipped)
11. mtbmurf (paid) (shipped)
12. nfetterly (paid) (shipped)
13. wolfstyle (paid) (shipped)
14. stewdogg (paid) (shipped)
15. Exeter354 (paid) (shipped)
16. Benchrest (paid) (shipped)
17. ghos (paid) (shipped)
18. jdebo (paid) (shipped)
19. DellSuperman (paid) (shipped)
20. az2ak (paid) (shipped)
21. SRT-10 (danny-b) (traded) (shipped)
22. lightknot (paid) (shipped)
23. mcbrat (paid) (.)
24. mcbrat (paid) (.)
25. mcbrat (paid) (.)




Cu Standard triple pill (Fit's Mac's Tri-EDC and a couple others)
1. SOYCD (paid) (shipped)
2. SOYCD (paid) (shipped)
3. gonefishing (paid) (shipped)
4. Dirty Wage Guy (paid) (shipped)
5. Dirty Wage Guy (paid) (shipped)
6. KDM (paid) (shipped)
7. IsaacL (paid) (shipped)
8. Benchrest (paid) (shipped)
9. Benchrest (paid) (shipped)
10. Exeter354 (paid) (shipped)
11. az2ak (paid) (shipped)
12. SOYCD (paid) (shipped)
13. SOYCD (paid) (shipped)
14. SOYCD (paid) (shipped)
15. SOYCD (paid) (shipped)
16. SOYCD (paid) (shipped)
17. SOYCD (paid) (shipped)
18. SOYCD (paid) (shipped)
19. SOYCD (paid) (shipped)
20. SOYCD (paid) (shipped)
21. Ladd (paid) (shipped)
22. Ladd (paid) (shipped)
23. litew8 (paid) (shipped)
24. available
25. available
26. available
27. available
28. available
29. available
30. available
31. available
32. available
33. available
 
Last edited:

bubble

Enlightened
Joined
Oct 6, 2013
Messages
571
I will take #4 .
I send my payment within 48 hours

Cheers for making this happen
 
Last edited:

stewdogg

Enlightened
Joined
Feb 9, 2012
Messages
201
Location
Mad Wisconsin
I would still like mine as well.

Very cool to see these become a tangible item. Thanks for putting in the time and effort to make it happen!
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
These pills are an excellent product! Congratulations for bringing these to market. Probably the best SST-50 upgrade released and long overdue.
 

mcbrat

Flashlight Enthusiast
Joined
Jan 28, 2013
Messages
3,971
Location
Iowa
Made at a small machine shop a couple blocks from my house. I took in a spare pill and the drawings and measurements from my prototype I made for the conversion.
 

bubble

Enlightened
Joined
Oct 6, 2013
Messages
571
Paypal sent

And also could you help us to source all the parts to complete the engine
 

bubble

Enlightened
Joined
Oct 6, 2013
Messages
571
I got mine from mountain electronics. I'll post more info later.

Would be great thank you..
could you post a w.i.p of your engine making?
Any step to step pictures?
I am not that much familiar with building a light engine
 

mcbrat

Flashlight Enthusiast
Joined
Jan 28, 2013
Messages
3,971
Location
Iowa
Paypal sent

And also could you help us to source all the parts to complete the engine

This is what I used in my test engine...

Driver
http://www.mtnelectronics.com/index.php?route=product/product&path=67_116&product_id=52

LEDs
http://www.mtnelectronics.com/index.php?route=product/product&path=60_106&product_id=325

Optic
http://www.mtnelectronics.com/index.php?route=product/product&path=68_69&product_id=62

Both pieces come with wires attached, so I removed one set. I'm just a hack, and used to wiring guitars and automotive stuff, not much small stuff. I actually wrecked my driver and made it into a 0ne mode :)

Best search other threads here for proper soldering techniques... :)
 
Last edited:
Top