RofisLight        
Results 1 to 6 of 6

Thread: Surefire Fury P3X mods

  1. #1
    *Flashaholic* precisionworks's Avatar
    Join Date
    Apr 2007
    Location
    Benton Illinois
    Posts
    6,603

    Default Surefire Fury P3X mods

    The P3X can be run with three different power sources:
    • 3xCR123 as designed by the company
    • 2x18500 after boring
    • 2x18650 using a 1-cell extender & a short spacer

    Why does the Fury need the spacer? Because 2x18650 will not allow the tailcap to fully seat, due to the length of the two cells. This image shows the positive end of 2x18650 compared to 4xCR123:

    2015-11-22_135734.jpg

    When 2x18650 are installed in the tube this is the gap between the body & the extender:

    2015-11-22_140050.jpg

    The process of machining a spacer starts with 1" diameter brass rod. First op is facing the end smooth:

    2015-11-22_140227.jpg

    The end is then center drilled:

    2015-11-22_140345.jpg

    Next a drill is selected that will make a hole that's about 97%-98% of desired size:

    2015-11-22_140439.jpg
    Surefire® boring including E-Series & Weapon Lights* Please text msg, phone or email through contact page at www:Precision.Works

  2. #2
    *Flashaholic* precisionworks's Avatar
    Join Date
    Apr 2007
    Location
    Benton Illinois
    Posts
    6,603

    Default Re: Surefire Fury P3X mods

    Drilling is followed by reaming to quickly get to the necessary size:

    Attachment 1506

    The spacer is parted off the bar & supported by an expanding arbor for final finishing & smoothing:

    Attachment 1507

    Here's the P3X ready to run. Removing the spacer quickly converts the light back to a 3-cell.

    Attachment 1508
    Last edited by precisionworks; 11-22-2015 at 04:58 PM.
    Surefire® boring including E-Series & Weapon Lights* Please text msg, phone or email through contact page at www:Precision.Works

  3. #3
    Flashaholic* tobrien's Avatar
    Join Date
    Dec 2005
    Location
    Georgia Highway 441
    Posts
    4,861

    Default Re: Surefire Fury P3X mods

    absolutely amazing work
    aka Edgar Allan Bro, Brosama Bin Liftin, Walter Crunkite, Bro Namath, Teddy Brosevelt, and the Tomahawk Crunkmissile.
    my lights - review of PrecisionWorks - that's Gucci Mane in my avatar

  4. #4

    Default Re: Surefire Fury P3X mods

    Hi Barry,

    What is the cost and turnaround time on having this done to the Fury P3X with batteries and rapid charger? Thank You.

    Jimmy

  5. #5
    *Flashaholic* precisionworks's Avatar
    Join Date
    Apr 2007
    Location
    Benton Illinois
    Posts
    6,603

    Default Re: Surefire Fury P3X mods

    There are quite a few options listed in the prior posts. If you'll list out what you want to have done I'll be happy to figure up a price.
    Surefire® boring including E-Series & Weapon Lights* Please text msg, phone or email through contact page at www:Precision.Works

  6. #6

    Default Re: Surefire Fury P3X mods

    Hello Barry,

    What would be the cost for the following:


    • Surefire Fury P3X modification for 2x18650 using a 1-cell extender & a short spacer


    Cost would include boring the P3X body, the extender and the spacer. Can you provide a picture of the spacer (the pictures in the second post, above, don't work)? I'll also be sending along a P2X body for boring as well.

    Thank you!

    Colin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •