lite brite
Newly Enlightened
- Joined
- Nov 1, 2005
- Messages
- 83
I dropped my CU Maratac and shattered the lens, I contacted them and they dont/wont fix it..is there anyone that I could send it to to fix? TIA, Steve
Need someone to help me with my maratac aaa
- Thread starter lite brite
- Start date
Help Support Candle Power Flashlight Forum
Ali express and Kaidomain have a lot of different diameter AR costed lenses
http://www.kaidomain.com/c/225.DIY-Flashlight-Lens
http://www.kaidomain.com/c/225.DIY-Flashlight-Lens
gunga
Flashaholic
I can try sourcing a lens. You want it modded with a new LED too?
lite brite
Newly Enlightened
- Joined
- Nov 1, 2005
- Messages
- 83
That would be great, a new LED might be good too!
gunga
Flashaholic
I can't seem to find a suitable lens. I found a good donor light for lens and even reflector if yours is damaged for $7.5. .let me know quickly if this is suitable (I'm guessing it's a cyber Monday deal).
gunga
Flashaholic
You need a 12x1mm lens. Kaidoman sells 12x1.6mm (I have one). I can work but the head will screw in 0.6mm less. That may expose the oring or maybe fine. There will be a bigger gap. That is another choice. $2.4 for the lens.
lite brite
Newly Enlightened
- Joined
- Nov 1, 2005
- Messages
- 83
yes, that would be great!
lite brite
Newly Enlightened
- Joined
- Nov 1, 2005
- Messages
- 83
The bigger gap would be fine I think
gunga
Flashaholic
Pm sent with options. Btw, any reflector or bezel damage or just the lens?
