Fitorch        
Page 1 of 2 12 LastLast
Results 1 to 30 of 46

Thread: Oveready Unified P60 Hosts

  1. #1

    Lightbulb Oveready Unified P60 Hosts

    Introducing our new Unified Host series

    We reimagined the P60 format itself. Cutting the head and body out of a single piece of metal makes the tailcap easier to rotate while reducing complexity and improving heat transfer to the surface. Loaded from the top, your light engines are also closer to the front. Combining these with both tailcap options creates three new hosts (6 configurations):


    UNIFIED P20 HOST - HA BLACK




    UNIFIED Z35 HOST - HA BLACK




    UNIFIED Z70 HOST - HA BLACK

    Last edited by ElectronGuru; 11-13-2017 at 12:11 PM.
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  2. #2
    Flashaholic* KITROBASKIN's Avatar
    Join Date
    Mar 2013
    Location
    New Mexico, USA
    Posts
    2,516

    Default Re: ETA Requests - Oveready / TorchLAB

    Very much looking forward to some products that may become "instant classics".

  3. #3
    xdayv's Avatar
    Join Date
    Aug 2014
    Location
    Philippines
    Posts
    1,273

    Default Re: ETA Requests - Oveready / TorchLAB

    so who scored some cool z series?
    Dave
    "two is one, one is none... three or more is fun."

  4. #4

    Default Re: ETA Requests - Oveready / TorchLAB

    I got the Z70 and Z35, the P20 is all so very tempting with the smaller head. I think the proportions are perfect on the P20 I just wish I could use a clicky with it.

  5. #5
    xdayv's Avatar
    Join Date
    Aug 2014
    Location
    Philippines
    Posts
    1,273

    Default Re: ETA Requests - Oveready / TorchLAB

    Quote Originally Posted by mk2rocco View Post
    I got the Z70 and Z35, the P20 is all so very tempting with the smaller head. I think the proportions are perfect on the P20 I just wish I could use a clicky with it.
    The P20 looks awesome but prefer a clicky over the ZRS... so will look at the Z35 and Z70 instead.

    The DIP P60 Drop-in is gone?
    Dave
    "two is one, one is none... three or more is fun."

  6. #6

    Default Re: ETA Requests - Oveready / TorchLAB

    I got all three and the DIP P60 drop-in! I can't wait!
    SureFire - Quality and brilliance

  7. #7

    Default Re: ETA Requests - Oveready / TorchLAB

    What is the outside diameter of the head of the new Z70?

    The new hosts look amazing.

  8. #8

    Default Re: ETA Requests - Oveready / TorchLAB

    I wonder if a clicky tailcap would work, with the P20 host, if you used a IMR 15270 cell (CR2 sized) with a spacer around it, so it wouldn't rattle. Obviously runtime would be poor, but....It would be cool!
    SureFire - Quality and brilliance

  9. #9

    Join Date
    May 2009
    Location
    north carolina
    Posts
    1,079

    Default Re: Oveready Unified P60 Hosts

    I'm a little confused... to you remove the bezel ring to load a drop in? what happens to the lens?

  10. #10

    Default Re: Oveready Unified P60 Hosts

    Quote Originally Posted by tab665 View Post
    I'm a little confused... you remove the bezel ring to load a drop in? what happens to the lens?
    Sorry for the confusion, parts are installed from the top like building a sandwich

    Assembly:

    1. insert dropin
    2. insert one oring
    3. insert lens (remove from bag
    4. insert second oring
    5. thread in and tighten bezel ring


    So to change a drop, you reverse the sequence then repeat it: 54321, 12345
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  11. #11

    Join Date
    Feb 2013
    Location
    38.7296° N, 120.7985° W
    Posts
    929

    Default Re: Oveready Unified P60 Hosts

    Will a Z44 bezel tool work to tighten the ring, or is it a different size?.

  12. #12
    Moderator


    Join Date
    Dec 2008
    Location
    Penn's Woods
    Posts
    5,949

    Default Re: Oveready Unified P60 Hosts

    Z35 with a Clip and clicky, please. And more of the new dip switch dropins!!! I do hope they'll be a regular item...

  13. #13

    Default Re: Oveready Unified P60 Hosts

    Quote Originally Posted by AndyF View Post
    Will a Z44 bezel tool work to tighten the ring, or is it a different size?.
    These are notched specifically to work with our tools.

    Quote Originally Posted by scout24 View Post
    Z35 with a Clip and clicky, please. And more of the new dip switch dropins!!! I do hope they'll be a regular item...
    Yes, didn't make enough this time but they (and a mule DIP) will be our new standard single XPL option. Much larger batch(es) already in progress!
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  14. #14
    Moderator


    Join Date
    Dec 2008
    Location
    Penn's Woods
    Posts
    5,949

    Default Re: Oveready Unified P60 Hosts

    Thanks... I'll be ordering one when they're back in stock.

  15. #15
    Flashaholic* the0dore3524's Avatar
    Join Date
    Nov 2015
    Location
    California (Bay Area)
    Posts
    883

    Default Re: Oveready Unified P60 Hosts

    If I understand correctly the P20 is twisty only? And all will fit a V5 drop-in?

  16. #16

    Default Re: Oveready Unified P60 Hosts

    Quote Originally Posted by the0dore3524 View Post
    If I understand correctly the P20 is twisty only? And all will fit a V5 drop-in?
    You could run a clicky but that would only leave you with room for a 20mm long cell, the ZRS gives you the extra room for an 18350 but makes it twisty only. Also the V5 drop in will fit any of the new hosts.

  17. #17
    Flashaholic
    Join Date
    Aug 2012
    Location
    Belgium
    Posts
    344

    Default Re: Oveready Unified P60 Hosts

    Is it possible to have a few more pics and infos of these new hots ? Like comparaison pics and specs next to a TL35+interface (is inside inside length indentical ?)

    They are pretty but hard to justify when you already have a few tl 35 bodies but they are really nice (especially the smooth bezels).

  18. #18

    Default Re: Oveready Unified P60 Hosts

    Quote Originally Posted by the0dore3524 View Post
    If I understand correctly the P20 is twisty only? And all will fit a V5 drop-in?
    Quote Originally Posted by mk2rocco View Post
    You could run a clicky but that would only leave you with room for a 20mm long cell, the ZRS gives you the extra room for an 18350 but makes it twisty only. Also the V5 drop in will fit any of the new hosts.
    This is correct. All new hosts work with the v5 Triple and the P20 is essentially twisty only because ZRS is the only option for existing cells.


    Quote Originally Posted by Croquette View Post
    Is it possible to have a few more pics and infos of these new hots ? Like comparaison pics and specs next to a TL35+interface (is inside inside length indentical ?)
    Sure, let me get caught up with orders, then take more pics and get one into the hands of a reviewer!
    Control the Dark

    OR Facebook | OR Forum
    | OR Insider | OVEREADY.com

  19. #19

    Default Re: Oveready Unified P60 Hosts

    Received my Unified Z70 today. An “Instant Classic”. Installed my V5 dropin (A33) and a triad tail cap. Paired with my the black satin BOSS 70 (medium frosted optic and the crenelated AlTiN bezel) they are my new illumination dynamic duo.

    🏻🏻🏻

  20. #20
    ven's Avatar
    Join Date
    Oct 2013
    Location
    Manchester UK
    Posts
    18,710

    Default Re: Oveready Unified P60 Hosts

    Quote Originally Posted by U2v5 View Post
    Received my Unified Z70 today. An “Instant Classic”. Installed my V5 dropin (A33) and a triad tail cap. Paired with my the black satin BOSS 70 (medium frosted optic and the crenelated AlTiN bezel) they are my new illumination dynamic duo.


    How can you post that amount of awesome info, without any pic/s..................


  21. #21

    Default Re: Oveready Unified P60 Hosts

    They have arrived! Loving the matte finish, very even and perfect. I was on the fence about the P20 but I'm glad I picked it up I'll take some better pictures later today or tomorrow.


    Last edited by mk2rocco; 11-18-2017 at 05:13 PM.

  22. #22

    Default Re: Oveready Unified P60 Hosts

    This is for anyone wondering how much longer the DPC tailcap is over the standard. Just keep in mind the standard would have a boot protruding from the bottom, that would add some length.


    And how it's constructed...

    Last edited by mk2rocco; 11-18-2017 at 04:48 PM.

  23. #23

    Default Re: Oveready Unified P60 Hosts

    My apologies!!! I’m replying on the phone app and have trouble posting pix. ☹️

    I will answer my own earlier question about diameter. The head diameter is 1.240”, the body diameter 0.818” and the last diameter 0.991” where it butts up to the tail cap.

    My triad cap diameter is 1.238" esentially matching the Z70 head.

    Untitled by Pete Lardizabal, on Flickr

    Untitled by Pete Lardizabal, on Flickr
    Last edited by ElectronGuru; 11-19-2017 at 08:42 PM.

  24. #24
    ven's Avatar
    Join Date
    Oct 2013
    Location
    Manchester UK
    Posts
    18,710

    Default Re: Oveready Unified P60 Hosts

    Awesome! Thanks for the pics

  25. #25

    Default Re: Oveready Unified P60 Hosts

    Just received my p20 with DIP, z35, and z70 and love the new lights. Now I need to get a drop in for the z35 and 70. Can't wait till 219C is available and possibly XPL HI.

  26. #26

    Default Re: Oveready Unified P60 Hosts

    Could someone post some beam shots of the DIP dropin?

  27. #27

    Default Re: Oveready Unified P60 Hosts

    Here's where the BOSS falls into the lineup..

  28. #28
    ven's Avatar
    Join Date
    Oct 2013
    Location
    Manchester UK
    Posts
    18,710

    Default Re: Oveready Unified P60 Hosts

    What a line up! The DIP drop in certainly has my interest to

  29. #29

    Default Re: Oveready Unified P60 Hosts

    Last picture for the day

    Here's a SF lanyard ring in place of the clip..


  30. #30
    ven's Avatar
    Join Date
    Oct 2013
    Location
    Manchester UK
    Posts
    18,710

    Default Re: Oveready Unified P60 Hosts

    Awesome pics guys, thanks for sharing them and making me super jealous

    I really like the understated looks(no print/knurling), simple, desirable and designed with so much thought. These do look super comfortable to use, being a big fan of the z2...................they are impossible to not love at 1st sight

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •