yaesumofo
Flashlight Enthusiast
SORRY GUYS I HAVE TO CANCEL THIS DUE TO LACK OF INTEREST.
YAESUMOFO
There has of late been a fair amount of chatter about this type of mod. I have been building a few these up for a while now and have decided to make a few for the masses.
Here is the Mega Mag Mod
This mod will include:
LUX III emitter.
Hotlips from Hotbeam.
UCL from Flashlightlens.com
Mag reflector cut to perfection.
All skillfully installed inside a (BLACK) mag 3 C body.
This Project is inspired by the famous MR BULK Space Needle II Light. (thanks Charlie you da man)
There are a few differences though.
This is a LUX III emitter. Not a V.
This light will be directly driven with 3 C cells not 123a's.
It will be built by me in California not Charlie in Hawaii.
The beam on this light is tight. It is a real light saber type of beam with the usual fine Mag reflector side spill.
The beam from the MEGA MAG MOD reminds me of a mini LIGHT SUN that the police shine from helicopters.
I would like to know if there is any interest in this light. It will cost $100.00 delivered via priority mail anywhere in the USA. International delivery will be more.
The delivery ETA is approximately 30 days from the as yet to be determined "go" date.
I am not going to make less than 25 of these nor will I make more on the first run.
I know the burning question that some of you have. What bin are the emitters. Good question. I do not have the answer. I have heard it said that that there are no "bad" lux III's.
The bottom line with the MEGA MAG MOD is that it is not about the BIN it is about the overall flashlight. I will say that these lights will be BRIGHT and will be tested against a TWAK unit that will serve as the standard. Any emitter not measuring up in my test for brightness will not be used. That is the best I can do.
Anybody want one?
Yaesumofo
YAESUMOFO
There has of late been a fair amount of chatter about this type of mod. I have been building a few these up for a while now and have decided to make a few for the masses.
Here is the Mega Mag Mod
This mod will include:
LUX III emitter.
Hotlips from Hotbeam.
UCL from Flashlightlens.com
Mag reflector cut to perfection.
All skillfully installed inside a (BLACK) mag 3 C body.
This Project is inspired by the famous MR BULK Space Needle II Light. (thanks Charlie you da man)
There are a few differences though.
This is a LUX III emitter. Not a V.
This light will be directly driven with 3 C cells not 123a's.
It will be built by me in California not Charlie in Hawaii.
The beam on this light is tight. It is a real light saber type of beam with the usual fine Mag reflector side spill.
The beam from the MEGA MAG MOD reminds me of a mini LIGHT SUN that the police shine from helicopters.
I would like to know if there is any interest in this light. It will cost $100.00 delivered via priority mail anywhere in the USA. International delivery will be more.
The delivery ETA is approximately 30 days from the as yet to be determined "go" date.
I am not going to make less than 25 of these nor will I make more on the first run.
I know the burning question that some of you have. What bin are the emitters. Good question. I do not have the answer. I have heard it said that that there are no "bad" lux III's.
The bottom line with the MEGA MAG MOD is that it is not about the BIN it is about the overall flashlight. I will say that these lights will be BRIGHT and will be tested against a TWAK unit that will serve as the standard. Any emitter not measuring up in my test for brightness will not be used. That is the best I can do.
Anybody want one?
Yaesumofo