I Bought 20
•TORCHSTAR HL GU10H-D-6W27
•LED GU10 6W 2700K CRI>90
•120V 60Hz 50mA 360 Lumens
They came bundled with a recessed can:
•TYPE IC Model:624
After installing them I noticed that whenever I adjust the speed of the ceiling fan (that is on the same circuit but not using the same switch & I don't have any lights wired to the fan directly)these LEDs would turn off for about one second then turn back on.
I've done numerous tests in an attempt to diagnose what is the cause of this.
•I bypassed the wall switch for these lights, while directly wired they still cut out & on
•I have tried 3 other GU10 bulbs exactly the same as these Torchstar but different manufacturers, none of these other manufacturers bulbs cut out.
•I have 2 of these Torchstar LEDs in my hallway on a different circuit. When I disconnect the Torchstar Bulbs that are on the same circuit as the fan, then adjust the fan speed, the 2 in the hall cut out. ???
What is going on here? What possibly could be causing these bulbs to do this?
•TORCHSTAR HL GU10H-D-6W27
•LED GU10 6W 2700K CRI>90
•120V 60Hz 50mA 360 Lumens
They came bundled with a recessed can:
•TYPE IC Model:624
After installing them I noticed that whenever I adjust the speed of the ceiling fan (that is on the same circuit but not using the same switch & I don't have any lights wired to the fan directly)these LEDs would turn off for about one second then turn back on.
I've done numerous tests in an attempt to diagnose what is the cause of this.
•I bypassed the wall switch for these lights, while directly wired they still cut out & on
•I have tried 3 other GU10 bulbs exactly the same as these Torchstar but different manufacturers, none of these other manufacturers bulbs cut out.
•I have 2 of these Torchstar LEDs in my hallway on a different circuit. When I disconnect the Torchstar Bulbs that are on the same circuit as the fan, then adjust the fan speed, the 2 in the hall cut out. ???
What is going on here? What possibly could be causing these bulbs to do this?