Fenix Outfitters        
Results 1 to 5 of 5

Thread: Triple triple/ triple quad/ quad quad driver

  1. #1
    Flashaholic Weld Inspector's Avatar
    Join Date
    Jul 2016
    Location
    Michigan
    Posts
    377

    Default Triple triple/ triple quad/ quad quad driver

    Is there a driver capable of powering 3- triples, 3- quads, or 4 quads? Playing with an idea ha ent been able to find info on wiring multiple mcpcbs on one driver dont want to go direct drive was thinking 2 maybe 3 cells in series to get the voltage up
    Last edited by Weld Inspector; 11-10-2018 at 03:27 AM.
    No such thing as too many flashlights, or knives.................
    No matter what they say.

  2. #2

    Default Re: Triple triple/ triple quad/ quad quad driver

    The old Mac 3300L used 3 lux-rc L333 boards. One as a master, 2 slaves. 2 cell setup. Not sure if you can do the same with the current 371d boards.... But that would be pretty pricey.

  3. #3

    Default Re: Triple triple/ triple quad/ quad quad driver

    Really though, most any driver should work depending on how you are wiring. Any of the pop can sized multi emitter light type drivers. Just need to make sure the batteries can handle the load...

  4. #4
    Flashaholic*
    Join Date
    Dec 2011
    Location
    NJ
    Posts
    1,461

    Default Re: Triple triple/ triple quad/ quad quad driver

    Just wire the quads and triples in parallel and you can use any of the normal 3V drivers. Board these days let you run the LEDs in parallelas well so in essence every LED will be in parallel

  5. #5
    Flashaholic Weld Inspector's Avatar
    Join Date
    Jul 2016
    Location
    Michigan
    Posts
    377

    Default Re: Triple triple/ triple quad/ quad quad driver

    Thank you all for your input im building my shopping list now
    No such thing as too many flashlights, or knives.................
    No matter what they say.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •