• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS. A poor man's 'Gizmo $65..SOLD!

HKdude

Newly Enlightened
Joined
Dec 24, 2013
Messages
167
Location
Tempe AZ
First up, a No-Name Stainless Steel flashlight with DIY setup.
Features the following:

  • SS host with deep OP reflector and reverse clicky switch.
  • XM-L2 T5-5C1 4000K LED on copper mPCB.
  • Mtn Electronics 17mm FET Direct Drive driver with 60 second Turbo step-down (ie: drops from 100% to 50% after 60 seconds).
  • Levels: 2%, 5%, 20%, 50%, 100%
  • Fits a 65mm unprotected 18650 battery. Switch can be unscrewed a bit to fit a longer protected cell but the button will stick out the back and it won't be able to tailstand.
This is a decent no-name host. Solid heavy feel in the hand, 8 oz with battery. Nice beam with a decent throw profile. Measured ~3Amps at the tailcap on high so even though the driver is Direct Drive via FET it's not going pull too much current or heat up a lot.
Note: Switch can be a bit finicky, but never bothered me enough to mess with it. Always works.

Bought from fellow CPF'er.
Asking $85 NOW $65 delivered..SOLD

Sold, Thanks CPF!




2nd up is a Copperhead made by CPF's own "Schizeckinosy". (SOLD)
* Smooth Bezel
* Optic-FOV 45*
* XML2 5K
* KD 3050 50ma low
* L-M-H No Memory
* Foward McClickie Cap
* Completely potted, heavy duty wiring, damn near indestructible.
* Designed for so you can add an extra 123 tube for fitting a 18650, so just a 123 battery is a bit loose, I used a rolled up $1 bill as sleeve. (not included..LOL)
I bought this from the original CPF owner. Has a very nice patina built up, easily removed with Ketchup or lemon juice. Small ding in copper edge where a bezel would be, but no bezel on this light. Visible in second photo. Doesn't have any effect, very small.
Asking $60 delivered. (SOLD)

IMG_9078.jpgIMG_9079.jpgIMG_9080.jpg

First "I'll take it" in post, snags the light. Followed by prompt payment please.

Paypal G&S, I eat the fees.
Shipping free to CONUS via USPS.
PM any questions.
Thanks for looking.
 

Attachments

  • IMG_9069.jpg
    IMG_9069.jpg
    83.5 KB · Views: 428
Last edited:

wolfy

Enlightened
Joined
Apr 13, 2010
Messages
326
Location
Wollongong, Australia
Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

Ill take the poor mans gizmo if you dont mind shipping to Australia, just let me know total with shipping and I will paypal it.
 

HKdude

Newly Enlightened
Joined
Dec 24, 2013
Messages
167
Location
Tempe AZ
Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

Sorry man, I don't ship Internationally.

Appreciate the interest.
 

HKdude

Newly Enlightened
Joined
Dec 24, 2013
Messages
167
Location
Tempe AZ
Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

The Copperhead is on it's way to "Msf", thanks for the purchase Mark.
 

Msf

Enlightened
Joined
Jul 14, 2016
Messages
262
Location
Virginia
Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

Just received the Copperhead. Very nice light and a very pleasant transaction with HKdude.
Thanks.
 

autogiro

Enlightened
Joined
Sep 28, 2006
Messages
751
Location
Pikes Peak, CO
Re: FS. A poor man's 'Gizmo Price drop to $65

I find the SS host intriguing so... I'll take a chance on it. Please send payment info.
Auto
 

HKdude

Newly Enlightened
Joined
Dec 24, 2013
Messages
167
Location
Tempe AZ
Re: FS. A poor man's 'Gizmo Price drop to $65

You got it Auto....PM sent. PP received,

Will ship it USPS tomorrow morning.

Thanks again man

Kevin
 
Last edited:
Top