I have a SF lego consisting of an E2L-AA body & tailcap, with a Lumens Factory E2C adapter, and a Z44 bezel hosting a Malkoff M31L. Works fine. I tried to replace the LF E2C adapter with a Vital Gear adapter. The VG adapter is more aggressively textured, and sometimes it can be inconvenient trying to remove the LF adapter when it is really snugged down, since the sides are tapered and smooth.
Anyway, when I replaced the LF E2C with the VG E2C, the light doesn't work. The tailcap is not the problem. I tested both without the bezel, by placing the Malkoff in the adapter, pushing the module down all the way against the batteries, and turning it on. The LF works, the VG doesn't. The LF adapter is not anodized on the inside, but the VG adapter is anodized everywhere. Has anyone else experienced this problem? All suggestions welcomed. Thank you!
Anyway, when I replaced the LF E2C with the VG E2C, the light doesn't work. The tailcap is not the problem. I tested both without the bezel, by placing the Malkoff in the adapter, pushing the module down all the way against the batteries, and turning it on. The LF works, the VG doesn't. The LF adapter is not anodized on the inside, but the VG adapter is anodized everywhere. Has anyone else experienced this problem? All suggestions welcomed. Thank you!
Last edited: