Radio Shack Multimeter w/ PC Interface on Sale

Roy

Farewell our Curmudgeon Administrator
Joined
Apr 14, 2002
Messages
4,465
Location
Granbury, Tx USA
Just got a Radio Shack sales flyer in the mail. In it is a auto-ranging multimeter with a PC interface for $59.99!

"RadioShack auto-ranging digital multimeter
works alone or with a PC to provide big
displays and store readings. Standard functions
plus current to 10 amps, capacitance to 40uf,
frequency to 4MHz."

The stock number is 22-812.
 

TrueBlue

Flashlight Enthusiast
Joined
Mar 5, 2004
Messages
2,373
Location
Central CA
Great find, Roy! Thanks!


I was looking for a PC multimeter at Sears and OSH but they don't have them. Sales people just shrug their shoulders when I asked if they will restock or are the meters discontinued. Don't worry as I didn't really expect a correct answer from anyone at Sears/OSH /ubbthreads/images/graemlins/icon23.gif.

As I read the PDF ONLINE MANUAL for the meter it says the meter runs on PC computers with Win 95, 98, ME or 2000.

Has anyone tried the RS multimeter with XP? I do have a notebook computer with ME but I'd like to use it with one of my XP computers.
 

idleprocess

Flashaholic
Joined
Feb 29, 2004
Messages
7,197
Location
decamped
Re: Radio Shack Multimeter w/ PC Interface on Sal

Looks nifty. It has quite a bit more functionality than a typical DMM, but I doubt it could displace a good oscilloscope.
 

Roy

Farewell our Curmudgeon Administrator
Joined
Apr 14, 2002
Messages
4,465
Location
Granbury, Tx USA
Re: Radio Shack Multimeter w/ PC Interface on Sal

I use my 22-805 with XP Pro with no problem. Check the RS web site and see if you can find a newer program.
 

MrAl

Flashlight Enthusiast
Joined
Sep 9, 2001
Messages
3,144
Location
New Jersey
Re: Radio Shack Multimeter w/ PC Interface on Sal

Hi there,

That doesnt sound too bad, my meter cost over 100 dollars
at RS and i hardly use it with the comp anymore, but
i have used it to test batteries. It's easier then
having to check the battery every so often during
discharge.

Take care,
Al
 

Negeltu

Enlightened
Joined
Aug 28, 2003
Messages
724
Location
Oregon, USA
Re: Radio Shack Multimeter w/ PC Interface on Sal

haveblue,

Most likely if it works with win2000 it will work with xp... if not..then run it's software in Compatability mode /ubbthreads/images/graemlins/wink.gif
 

TrueBlue

Flashlight Enthusiast
Joined
Mar 5, 2004
Messages
2,373
Location
Central CA
Re: Radio Shack Multimeter w/ PC Interface on Sal

You'll have to give us a mini-review of the DDM PC multimeter when you get it...OK?

How long ago did you order it?
 

wholeflaffer

Enlightened
Joined
Jun 20, 2004
Messages
237
Location
Pennsylvania, USA
Re: Radio Shack Multimeter w/ PC Interface on Sal

Ordered it Friday. I might have it by the end of this week.

I'll be glad to write it up...it's emotionally hard to buy a DMM on the web without having a chance to "feel" its quality of construction, but I decided to take the chance. By writing it up, I can hopefully spare others the same degree of uncertainty! /ubbthreads/images/graemlins/confused.gif

I'd also be curious to know whether it speaks ASCII, since the Radio Shack model apparently doesn't. That would make it relatively easy to write or integrate software for it. /ubbthreads/images/graemlins/tongue.gif
 

markdi

Flashlight Enthusiast
Joined
Jun 27, 2003
Messages
2,403
Location
Portland Oregon
Re: Radio Shack Multimeter w/ PC Interface on Sal

I have wave star for my tektronix ociloscopes and multi meters but I am going to buy one of those cheap meters for a christmas present
 

jtice

Flashaholic
Joined
May 21, 2003
Messages
6,331
Location
West Virginia
Re: Radio Shack Multimeter w/ PC Interface on Sal

wholeflatter, That site is actually an off shoot of CircuitSpecialists.com
I have ordered from them before, they seem great.
The free DMM has been workin fine for me for a few months now. /ubbthreads/images/graemlins/smile.gif
 

wholeflaffer

Enlightened
Joined
Jun 20, 2004
Messages
237
Location
Pennsylvania, USA
Re: Radio Shack Multimeter w/ PC Interface on Sal

Excellent /ubbthreads/images/graemlins/thumbsup.gif! Always feels better when someone has a good word to put in /ubbthreads/images/graemlins/cool.gif.
 

rdshores

Enlightened
Joined
May 3, 2004
Messages
400
Location
Vermont
Re: Radio Shack Multimeter w/ PC Interface on Sal

/ubbthreads/images/graemlins/thumbsup.gif to CircuitSpecialists.com also. I got a capacitance meter and an inductance meter and a free DVM.
 

wholeflaffer

Enlightened
Joined
Jun 20, 2004
Messages
237
Location
Pennsylvania, USA
Re: Radio Shack Multimeter w/ PC Interface on Sal

This order, including the meter, should be on my doorstep when I get home from work this afternoon /ubbthreads/images/graemlins/santa.gif. I'll try to get initial impressions to you by tomorrow, and later on (if worthwhile) a bit more of a writeup, on this thread.
 

BillRoberts

Newly Enlightened
Joined
Dec 2, 2003
Messages
52
Re: Radio Shack Multimeter w/ PC Interface on Sal

Do either of these meters store datapoints?

Or do you nedd to be hooked to a PC to collect them real time?
 

TrueBlue

Flashlight Enthusiast
Joined
Mar 5, 2004
Messages
2,373
Location
Central CA
Re: Radio Shack Multimeter w/ PC Interface on Sal

The DMM has to be hooked to the computer through the RS232 port to store information long term. Without the PC the meter is just a simple multimeter.
 

wholeflaffer

Enlightened
Joined
Jun 20, 2004
Messages
237
Location
Pennsylvania, USA
Re: Radio Shack Multimeter w/ PC Interface on Sal

Still playing with the Circuit Specialists meter, but as haveblue said, this meter does not store datapoints internally. My initial impression of this cheap meter is very positive! And yes, to answer my previously asked question, this meter speaks in well-documented ASCII bytes.

Some meters do, though...they have an internal clock/calendar (or at least a timer) that triggers the recording at programmable intervals.
 
Top