Best Lux3 colour bin for dimming

[greg_in_canada]

Icarus's nFlex mod and a comment in this thread made me
wonder about the best colour bin for use in a dimmable flashlight.

My 3-cubed mod (unknown bin lux3) is nice and white at
800 mA but fairly green when dimmed.

Should a person buy the blue-est lux3 they can find so
that the colour is better when dimmed?

Thanks - Greg

[cy]

I don't know if there is a corolation, but my R2H MM+ and BB500 sammies seems to have a better color on 16 ohm low in firefly. VS MM+ Tbin on 16 ohm low firefly.

All three of my MM+ Tbin sammies are greenish on 16 ohm low, firefly. Including one of the MM+ Tbin which is blueish on high.

Does anyone know if lower vf makes any difference.

[Icarus]

My TX1J is not green as you might think when you look at the pictures. At the lowest (nightlight) level it's more yellow compared to the white of the higher levels but not green at all. However I think a WA or WO will do better at the lowest level too.

[Hoghead]

Just to add some more information to this thread, I have two of McGizmo's L1/2x123 mods.

#1: TWAK is white on low

#2: X4T 5 watt has a warm and slightly green tint on low

Both lights are great on high.

[greg_in_canada]

Anyone else have some data?

I'm itching to do an nFlex mod but want
to avoid the greenies.

Greg

[Icarus]

Within a few days I'll do my next nFlex mod. Then I’ll be able to try different emitters. I'll post my findings here.