Need help with A new PR-T decision...

Bushman · Aug 13, 2004

Currently I have a DB 917 lux III running on a L4 body. I would like to revert this light back to stock with the McE2s two stage tail cap.

What I would now like to do is replace the 917 with something that would run on an E1e body. I currently have the KL4 head running on this light but would like to move it back to the two cell body where its value can be more realized.

I need suggestions on a BB milliamp value that would be best for a one cell operation!

Brightness for me is perfered over run time as long as that runtime is over 30-45 minutes.

albert · Aug 13, 2004

I would suggest a BB 500mA.

Please refer to this graph from kj's flashlight gallery.
http://www.obaq.tv/cpf/images/McLuxPRT-BB611-R4H-1x123-Ventilated_Runtime.png

tylerdurden · Aug 13, 2004

I also like 500ma for 1x123.

balrog · Aug 15, 2004

I've found that a BB652 gives around 45 minutes or more regulation hour runtime on 1x123 if using a Lux III J bin Vf. If I had an H bin Vf I'd go up to a BB694. If I had a K bin Vf I'd run it on a BB611.

These suggestions are all based on using a Badboy rev 4 and aiming for as bright as possible but still having the light regulated for around 45 minutes. I'm not sure why KJ's chart shows only 30 mins regulation, but my own graph of a BB667 rev 2 using TV0J achieved over 40 minutes regulation.

Kiessling · Aug 15, 2004

My McL4 (BB600 R2H) also got about 45 min in regulation on 1x123.

If you go 2-stage a BB600 is cool, but if you go 1-stage a BB500 or even 400 is much more reasonable IMHO.

bernhard

Bushman · Aug 16, 2004

This for now would be a one stage light. Thanks so far for your commments. They are helpful...

albert · Aug 16, 2004

Can someone please help answer these 2 questions? TIA.

How long will the runtime be for...
1) a BB500 on 1x123 using a Lux III H bin Vf?
2) a KL1 overdriven to 700mA on 1x123 using a Lux III H bin Vf?

hideo · Aug 20, 2004

albert,

my KL1/TWAK/750 mA runs on two 1800 mAH NiMH AA's for about 100 minutes at full brightness before it starts cycling on and off

based on that I'd guess a little over an hour for a 123 and your "H" Vf should extend that a little

hideo

Need help with A new PR-T decision...

Bushman

Flashlight Enthusiast

albert

Enlightened

tylerdurden

Flashlight Enthusiast

balrog

Enlightened

Kiessling

Flashaholic

Bushman

Flashlight Enthusiast

albert

Enlightened

hideo

Enlightened

Similar threads

Latest posts