Converter Board Grounding

knifebright · Mar 4, 2005

Hey wayne or anyone else with an answer
I've noticed on the newer renditions of the downboy and nexgen there is a metal ring around the bottom of the converter. If i skip the glue and use the solderpaste to affix the conveter to the e-can.. Do i still have to ground out the board???
jimmy

Billson · Mar 5, 2005

The ring is also a ground path so you can use that with no problems.

Chop · Mar 5, 2005

On the current NexGens, the ground ring is in tact and you can solder this ring to the can for the ground path.

On the current DownBoys, the ground rings is not connected. You can solder the ground ring to the can for a very strong mechanical bond, but you will still need to solder a ground wire from the can to the converter.

You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

Converter Board Grounding

knifebright

Enlightened

Billson

Flashlight Enthusiast

Chop

Flashlight Enthusiast

Similar threads

Latest posts