MR-X with X3T. ROLLCALL with PICS. #2

**hotbeam** · 03-18-2005, 08:58 PM

Continued from THIS THREAD

HAPPY BIRTHDAY MR-X!
5 years old, July 2008.

Much thanks to Burnt_Retinas and Rothrandir for making the MR-X a reality. This is a real milestone for LEDs.

Hotbeam

.

**hotbeam** · 03-18-2005, 08:59 PM

Pics from the previous build...

cy · 03-18-2005, 09:19 PM

Ok, keeping close tabs on this thread to make sure I get one this time

**J_Oei** · 03-18-2005, 09:34 PM

Reserving a spot...

**wasabe64** · 03-18-2005, 09:45 PM

Ditto

**shannow** · 03-18-2005, 09:52 PM

same...

**rick258** · 03-18-2005, 09:53 PM

Also still in.

Rick

**bajaiman** · 03-18-2005, 09:56 PM

As posted in the previous thread, I'm still in.

**Sinjz** · 03-18-2005, 10:01 PM

I have no idea what's going on here, but what the heck. I'll reserve a spot. [img]/ubbthreads/images/graemlins/grin.gif[/img]

**koala** · 03-19-2005, 09:51 AM

Yo, drop me an email if you make em, count me in for 1, although I am pretty busy lately to drop by your place.

Let tell you guys the legendary MR-X and PocketMate-W are awesome. No words can describe them when I first tested them. Even with the blinds pulled down during day time the beam is so intense that it turns day in to night [img]/ubbthreads/images/graemlins/grin.gif[/img].

I supply the host. I would go for a PocketMate-X instead. I always dig for variable. XYOx will be my choice!

**Pi_is_blue** · 03-19-2005, 10:01 AM

If the new MR-X lights have adjustable brightness settings, I would be in for one. I am thinking that I would like to run it off of Pila 168A cells, so would an MR-X in a C-cell body be possible?

cy · 03-19-2005, 10:08 AM

2X 18500 with a protection circuit in a 2C m*G is one sweet setup. Or 3x CR123 with a rubber hose sleeve

a tri-Ubin setup puts out aprox. same lumens as MR-X X3T with a smaller footprint. MRX will destroy tri-Ubin for throw.

**kevindick** · 03-19-2005, 10:20 AM

As I wrote in Sasha's version 2 of thsi thread, I'm in if they're X-bin.

**NITEFISH** · 03-19-2005, 12:35 PM

"X" bin, I'm in. [img]/ubbthreads/images/graemlins/smile.gif[/img]
I like the sugestions of 2c, rechargable option, and variable brightness.
Not another light... [img]/ubbthreads/images/graemlins/mpr.gif[/img]

**yaesumofo** · 03-19-2005, 01:00 PM

I will go for one.
Thanks
Yaesumofo

**hotbeam** · 03-19-2005, 02:08 PM

[ QUOTE ]
Sinjz said:
I have no idea what's going on here, but what the heck. I'll reserve a spot. [img]/ubbthreads/images/graemlins/grin.gif[/img]

[/ QUOTE ]

[img]/ubbthreads/images/graemlins/yellowlaugh.gif[/img] [img]/ubbthreads/images/graemlins/yellowlaugh.gif[/img] I'm trying to barter a perpetual power source capable of 4A drain, that is the size of a CR2 battery... from this spaceship that appeared in my dreams. [img]/ubbthreads/images/graemlins/grin.gif[/img]

Good to get some more input here. Yes, I am reasonably keen on a smaller 2C form factor also. Rechargeable, variable output, X-BEAST... I have yet to hear back from that darn supplier of mine regarding availability of the LED so.... at the moment, this is still vapourware [img]/ubbthreads/images/graemlins/confused.gif[/img]

**InFlux** · 03-19-2005, 03:38 PM

I'm still in the #2 slot from the previous thread, right? [img]/ubbthreads/images/graemlins/smile.gif[/img]

MY · 03-19-2005, 04:47 PM

Please put my John Hancock down for one Mr. X-BEAST.

Regards

**seattlite** · 03-19-2005, 05:09 PM

X-Bin...I'm in.

**BC0311** · 03-19-2005, 05:15 PM

Me too. [img]/ubbthreads/images/graemlins/thumbsup.gif[/img]

Britt

**gregw** · 03-19-2005, 07:31 PM

I believe I was third in line for this new run as posted in the old thread. [img]/ubbthreads/images/graemlins/grin.gif[/img]

With today's new stuff like the Fatman and nFlex boards, I'd definitely want something smaller with a variable output. Goes without saying that an "X" bin is a must. [img]/ubbthreads/images/graemlins/grinser2.gif[/img]

**MSaxatilus** · 03-19-2005, 08:03 PM

Hotbeam,

I am actually already a Mr-X owner, but if you go to a 2C size Mr. X, put me down on your list for another! That would truely be a magnificant light!

MSax

**Pi_is_blue** · 03-19-2005, 08:21 PM

Will the original MR-X's run fine on 8AA NiMH batteries?

**gregw** · 03-19-2005, 08:26 PM

[ QUOTE ]
Pi_is_blue said:
Will the original MR-X's run fine on 8AA NiMH batteries?

[/ QUOTE ]

The original MR-X's are made FOR 6AA NiMh batteries. i.e. Alkalines don't supply the required current to power MR-X at it's full capabilities.

**shannow** · 03-19-2005, 08:28 PM

Actually 6AA [img]/ubbthreads/images/graemlins/grin.gif[/img]

**Sinjz** · 03-19-2005, 08:52 PM

[ QUOTE ]
hotbeam said:
[ QUOTE ]
Sinjz said:
I have no idea what's going on here, but what the heck. I'll reserve a spot. [img]/ubbthreads/images/graemlins/grin.gif[/img]

[/ QUOTE ]

[img]/ubbthreads/images/graemlins/yellowlaugh.gif[/img] [img]/ubbthreads/images/graemlins/yellowlaugh.gif[/img] I'm trying to barter a perpetual power source capable of 4A drain, that is the size of a CR2 battery... from this spaceship that appeared in my dreams. [img]/ubbthreads/images/graemlins/grin.gif[/img]

[/ QUOTE ]

Hey I want on that list too!!! [img]/ubbthreads/images/graemlins/grin.gif[/img]

I knew this was for a MR-X of some sort. I just don't know what form or what price. I went back to the orginal thread, after posting, and read the last ~40 or so post. It didn't really clear it up, but then again I was pretty tired. [img]/ubbthreads/images/graemlins/smile.gif[/img] I'm still on the list for BOTH products. [img]/ubbthreads/images/graemlins/tongue.gif[/img]

**jarris50** · 03-19-2005, 11:35 PM

Count me in.....

**jhung** · 03-20-2005, 02:12 PM

Please put me on the list for one.

**easilyled** · 03-20-2005, 05:43 PM

Please put me on the list for this as well (X-bin)

**hotbeam** · 03-20-2005, 07:19 PM

Thanks for the continued interest. No news from my contact yet. I'll check with my "other" contact and see if he can assist. Can't hurt having too many, right? [img]/ubbthreads/images/graemlins/grin.gif[/img] [img]/ubbthreads/images/graemlins/tongue.gif[/img]

Thread: MR-X with X3T. ROLLCALL with PICS. #2

Thread Tools

Display

MR-X with X3T. ROLLCALL with PICS. #2

Re: MR-X with X3T. Hotlips with Magic Resistor TK. #2

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Re: MR-X with X3T. Hotlips with Magic Resistor TK.

Posting Permissions