wquiles
Flashaholic
I have been using the search function a lot lately and I am very confused /ubbthreads/images/graemlins/confused.gif as to what folks use in their SureFire turbo heads. I want to experiment but would hate to learn the hardway and instaflash those expensive SureFire lamps /ubbthreads/images/graemlins/banghead.gif
I have an L3 and M4 and given the 3xcell and 4xcell body and have been trying the KL6 head on various combinations, but there are far more possiblities once you use incandecent lamps with the KT4 when using regular CR123's or PILAs (168s and 150s, and with the bored-out bodies the larger PILAs and the mightly 18650 bare cells).
From the Surefire site, we know the "normal" combinations:
3xcell (M3T):
- MN15
- MN15
4xcell (M4)
- MN60
- MN61
6xcell (3xcell voltage - M6)
- MN21
- MN20
For example, here Size15's does an awesome job of possible combinations of lamps on the M3 and M3T:
Click here for the link
From the post above the N2 should also work on the Turbo head on 3 normal cells. That post also shows the X4T LED module, and although it does sounds extremely cool, I have never seen a beamshoot of that module compared to anything else. /ubbthreads/images/graemlins/naughty.gif
What about when using rechargables/PILA's, specially with the A19 extenders?
What I would like to politely ask is for folks to post here what combinations of lamps and batteries they have used in their M3T, M4, and M6 (and beamshoots, if available) so that we can keep this information in a single post for easier sharing.
Thanks, /ubbthreads/images/graemlins/happy14.gif
Will
<font color="red">Please Note:You do not have to post the whole link since in most cases it is far longer than the width of the page. You can edit your post and change it to display a short description. Thanks, Al /ubbthreads/images/graemlins/smile.gif</font>
I have an L3 and M4 and given the 3xcell and 4xcell body and have been trying the KL6 head on various combinations, but there are far more possiblities once you use incandecent lamps with the KT4 when using regular CR123's or PILAs (168s and 150s, and with the bored-out bodies the larger PILAs and the mightly 18650 bare cells).
From the Surefire site, we know the "normal" combinations:
3xcell (M3T):
- MN15
- MN15
4xcell (M4)
- MN60
- MN61
6xcell (3xcell voltage - M6)
- MN21
- MN20
For example, here Size15's does an awesome job of possible combinations of lamps on the M3 and M3T:
Click here for the link
From the post above the N2 should also work on the Turbo head on 3 normal cells. That post also shows the X4T LED module, and although it does sounds extremely cool, I have never seen a beamshoot of that module compared to anything else. /ubbthreads/images/graemlins/naughty.gif
What about when using rechargables/PILA's, specially with the A19 extenders?
What I would like to politely ask is for folks to post here what combinations of lamps and batteries they have used in their M3T, M4, and M6 (and beamshoots, if available) so that we can keep this information in a single post for easier sharing.
Thanks, /ubbthreads/images/graemlins/happy14.gif
Will
<font color="red">Please Note:You do not have to post the whole link since in most cases it is far longer than the width of the page. You can edit your post and change it to display a short description. Thanks, Al /ubbthreads/images/graemlins/smile.gif</font>